All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamLmCfgNumIntervalsStored
jnxSoamLmCfgNumIntervalsStored
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgNumIntervalsStored
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.2.1.1.12
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object specifies the number of completed Measurement Intervals to store in the history statistic table (jnxSoamLmHistoryStatsTable)
At least 32 completed Measurement Intervals need to be stored. 96 Measurement Intervals are recommended to be stored.
This object can only be written at row creation time and cannot be modified once it has been created.
What is jnxSoamLmCfgNumIntervalsStored?
The number of completed Measurement Intervals (1 to 1000, at least 32 recommended, 96 typical) that this session retains in jnxSoamLmHistoryStatsTable before older intervals roll off; set higher to keep a longer trend of loss history for reporting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.12 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgNumIntervalsStored
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.12.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgNumIntervalsStored.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxSoamLmCfgNumIntervalsStored.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgNumIntervalsStored OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2 | jnxSoamPmLmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1 | jnxSoamLmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1 | jnxSoamLmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.12 | jnxSoamLmCfgNumIntervalsStored | JUNIPER-SOAM-PM-MIB |