All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamLmCfgMeasurementEnable
jnxSoamLmCfgMeasurementEnable
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgMeasurementEnable
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.2.1.1.5
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: A vector of bits that indicates the type of SOAM LM counters found in the jnxSoamLmMeasuredStatsTable, jnxSoamLmCurrentStatsTable, jnxSoamLmHistoryStatsTable that are enabled. that are enabled.
A bit set to '1' enables the specific SOAM LM counter. A bit set to '0' disables the SOAM LM counter.
If a particular SOAM LM counter is not supported the BIT value is set to '0'.
Not all SOAM LM counters are supported for all SOAM LM types.
This object can only be written at row creation time and cannot be modified once it has been created.
bForwardTransmitedFrames (0) Enables/disables the jnxSoamLmCurrentStatsForwardTransmittedFrames and jnxSoamLmHistoryStatsForwardTransmittedFrames counters. bForwardReceivedFrames(1) Enables/disables the jnxSoamLmCurrentStatsForwardReceivedFrames and jnxSoamLmHistoryStatsForwardReceivedFrames counters. bForwardMinFlr(2) Enables/disables the jnxSoamLmCurrentStatsForwardMinFlr and jnxSoamLmHistoryStatsForwardMinFlr counters. bForwardMaxFlr(3) Enables/disables the jnxSoamLmCurrentStatsForwardMaxFlr and jnxSoamLmHistoryStatsForwardMaxFlr counters. bForwardAvgFlr(4) Enables/disables the jnxSoamLmCurrentStatsForwardAvgFlr and jnxSoamLmHistoryStatsForwardAvgFlr counters. bBackwardTransmitedFrames(5) Enables/disables the jnxSoamLmCurrentStatsBackwardTransmittedFrames and jnxSoamLmHistoryStatsBackwardTransmittedFrames counters. bBackwardReceivedFrames(6) Enables/disables the jnxSoamLmCurrentStatsBackwardReceivedFrames and jnxSoamLmHistoryStatsBackwardReceivedFrames counters. bBackwardMinFlr(7) Enables/disables the jnxSoamLmCurrentStatsBackwardMinFlr and jnxSoamLmHistoryStatsBackwardMinFlr counters. bBackwardMaxFlr(8) Enables/disables the jnxSoamLmCurrentStatsBackwardMaxFlr and jnxSoamLmHistoryStatsBackwardMaxFlr counters. bBackwardAvgFlr(9) Enables/disables the jnxSoamLmCurrentStatsBackwardAvgFlr and jnxSoamLmHistoryStatsBackwardAvgFlr counters. bSoamPdusSent (10) Enables/disables the jnxSoamLmCurrentStatsSoamPdusSent and jnxSoamLmHistoryStatsSoamPdusSent counters. bSoamPdusReceivedbReceivedMeasurements (11) Enables/disables the jnxSoamLmCurrentStatsSoamPdusReceived and jnxSoamLmHistoryStatsSoamPdusReceived counters. bMeasuredStatsForwardMeasuredFlr(26) Enables/disables the jnxSoamLmMeasuredStatsForwardFlr counter. bMeasuredStatsBackwardMeasuredFlr(27) Enables/disables the jnxSoamLmMeasuredStatsBackwardFlr counter.
What is jnxSoamLmCfgMeasurementEnable?
A bitmap where each bit turns collection of one specific SOAM LM counter (in jnxSoamLmMeasuredStatsTable, jnxSoamLmCurrentStatsTable, or jnxSoamLmHistoryStatsTable) on (1) or off (0), letting an admin limit which loss-measurement statistics this session actually gathers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.5 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgMeasurementEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.5.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgMeasurementEnable.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgMeasurementEnable OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2 | jnxSoamPmLmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1 | jnxSoamLmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1 | jnxSoamLmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.5 | jnxSoamLmCfgMeasurementEnable | JUNIPER-SOAM-PM-MIB |