All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamLmCfgFrameSize
jnxSoamLmCfgFrameSize
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgFrameSize
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.2.1.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object specifies the Loss Measurement frame size between 64 bytes and the maximum transmission unit of the EVC.
The range of frame sizes from 64 through 2000 octets need to be supported, and the range of frame sizes from 2001 through 9600 octets is suggested be supported.
The adjustment to the frame size of the standard frame size is accomplished by the addition of a Data or Test TLV. A Data or Test TLV is only added to the frame if the frame size is greater than 64 bytes.
This object is only valid for the entity transmitting the Loss Measurement frames, type 'lmSlm', and is ignored by the entity receiving frames. It is not applicable for the 'lmCcm' or 'lmLmm' types.
This object can only be written at row creation time and cannot be modified once it has been created.
What is jnxSoamLmCfgFrameSize?
The size, from 64 to 9600 bytes, of the frames this Loss Measurement session generates, letting an admin test loss behavior at a specific frame size (e.g. matching a customer's typical packet size) rather than only the default probe size.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.8 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgFrameSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.8.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgFrameSize.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgFrameSize OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2 | jnxSoamPmLmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1 | jnxSoamLmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1 | jnxSoamLmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.8 | jnxSoamLmCfgFrameSize | JUNIPER-SOAM-PM-MIB |