All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamLmCfgAlignMeasurementOffset
jnxSoamLmCfgAlignMeasurementOffset
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgAlignMeasurementOffset
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.2.1.1.20
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object specifies the offset in minutes from the time of day value if jnxSoamLmCfgAlignMeasurementIntervals is 'true' and the repetition time is a factor of 60 minutes. If not, the value of this object is ignored.
If the Measurement Interval is 15 minutes and jnxSoamLmCfgAlignMeasurementIntervals is true and if this object was set to 5 minutes, the Measurement Intervals would start at 5, 20, 35, 50 minutes past each hour.
This object can only be written at row creation time and cannot be modified once it has been created.
What is jnxSoamLmCfgAlignMeasurementOffset?
The offset in minutes (0 to 525600) from the top of the hour at which aligned Measurement Intervals should start for this Loss Measurement session, used only when jnxSoamLmCfgAlignMeasurementIntervals is true and the interval is a factor of 60 minutes; e.g. with a 15-minute interval an offset can shift intervals to start at :05/:20/:35/:50 instead of :00/:15/:30/:45.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.20 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgAlignMeasurementOffset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.20.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgAlignMeasurementOffset.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgAlignMeasurementOffset OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2 | jnxSoamPmLmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1 | jnxSoamLmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1 | jnxSoamLmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.20 | jnxSoamLmCfgAlignMeasurementOffset | JUNIPER-SOAM-PM-MIB |