All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamDmCurrentStatsSuspect
jnxSoamDmCurrentStatsSuspect
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamDmCurrentStatsSuspect
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.3.3.1.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: Whether the Measurement Interval has been marked as suspect.
The object is to be set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measurements during the Measurement Interval. Conditions for a discontinuity include, but are not limited to the following:
1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The conducting of a performance measurement is halted before the current Measurement Interval is completed 3 - A local test, failure, or reconfiguration that disrupts service
What is jnxSoamDmCurrentStatsSuspect?
Marks whether the currently-in-progress Measurement Interval's delay statistics should be treated as unreliable; it starts false and flips to true if a discontinuity occurs mid-interval (such as the local clock being adjusted by 10+ seconds), warning against trusting the interval's numbers for SLA reporting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.3.1.4 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCurrentStatsSuspect
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.3.1.4.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCurrentStatsSuspect.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamDmCurrentStatsSuspect OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3 | jnxSoamPmDmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.3 | jnxSoamDmCurrentStatsTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1 | jnxSoamDmCurrentStatsEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.4 | jnxSoamDmCurrentStatsSuspect | JUNIPER-SOAM-PM-MIB |