All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamDmCfgStartTimeType
jnxSoamDmCfgStartTimeType
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgStartTimeType
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.3.1.1.15
Node type: OBJECT-TYPE
Type: JnxSoamTcOperationTimeType
Access: read-only
Description: This object specifies the type of start time of the SOAM DM session. The start time can be disabled (none), immediate, relative, or fixed.
The value of 'none' is illegal and a write error will be returned if this value is used.
The value of 'immediate' starts the SOAM DM session when the jnxSoamDmCfgEnabled is true.
The value of 'fixed' starts the SOAM DM session when the jnxSoamDmFixedStartDateAndTime is less than or equal to the current system date and time and jnxSoamDmCfgEnabled is true. This value is used to implement an On-Demand fixed time PM session.
The value of 'relative' starts the SOAM DM session when the current system date and time minus the jnxSoamDmRelativeStartTime is greater than or equal to the system date and time when the jnxSoamDmStartTimeType object was written and jnxSoamDmCfgEnabled is true. This value is used to implement an On-Demand relative time PM session.
This object can only be written at row creation time and cannot be modified once it has been created.
What is jnxSoamDmCfgStartTimeType?
Controls how this Delay Measurement session's start time is scheduled: none (illegal, rejected on write), immediate (starts as soon as jnxSoamDmCfgEnabled is set true), relative, or fixed at a specific configured date/time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.15 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgStartTimeType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.15.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgStartTimeType.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgStartTimeType OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3 | jnxSoamPmDmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1 | jnxSoamDmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1 | jnxSoamDmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.15 | jnxSoamDmCfgStartTimeType | JUNIPER-SOAM-PM-MIB |