All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamDmCfgIndex
jnxSoamDmCfgIndex
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgIndex
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.3.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: An index to the Delay Measurement Configuration table which indicates the specific measurement session for the MEP.
jnxSoamPmMepOperNextIndex needs to be inspected to find an available index for row-creation.
Referential integrity is necessary, i.e., the index needs to be persistent upon a reboot or restart of a device. The index is never reused for other PM sessions on the same MEP while this session is active. The index value keeps increasing until it wraps to zero. This is to facilitate access control based on a fixed index for an EMS, since the index is not reused.
What is jnxSoamDmCfgIndex?
The index identifying a specific Delay Measurement session on this MEP; an admin creating a new session first reads jnxSoamPmMepOperNextIndex to get a free value, then uses that value here, and the index is never reused for other sessions on the same MEP until it wraps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.1 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.1.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgIndex.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgIndex OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3 | jnxSoamPmDmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1 | jnxSoamDmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1 | jnxSoamDmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.1 | jnxSoamDmCfgIndex | JUNIPER-SOAM-PM-MIB |