All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamDmCfgFrameSize
jnxSoamDmCfgFrameSize
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgFrameSize
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.3.1.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object specifies the Delay Measurement frame size between 64 bytes and the maximum transmission unit of the EVC.
The range of frame sizes from 64 through 2000 octets need to be supported, and the range of frame sizes from 2001 through 9600 octets is suggested to be supported.
The adjustment to the frame size of the standard frame size is accomplished by the addition of a Data or Test TLV. A Data or Test TLV is only added to the frame if the frame size is greater than 64 bytes.
This object is only valid for the entity transmitting the Delay Measurement frames (dmDmm, dm1DmTx) and is ignored by the entity receiving frames.
In addition, this object is not valid when jnxSoamDmCfgVersion is 0.
This object can only be written at row creation time and cannot be modified once it has been created.
What is jnxSoamDmCfgFrameSize?
The size, from 64 bytes up to the EVC's maximum transmission unit, of the frames this Delay Measurement session generates, letting an admin test delay behavior at a specific frame size rather than only a fixed default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.8 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgFrameSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.8.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgFrameSize.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgFrameSize OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3 | jnxSoamPmDmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1 | jnxSoamDmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1 | jnxSoamDmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.8 | jnxSoamDmCfgFrameSize | JUNIPER-SOAM-PM-MIB |