All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamDmCfgEnabled
jnxSoamDmCfgEnabled
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgEnabled
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.3.1.1.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: This object specifies whether the Delay Measurement session is enabled.
The value 'true' indicates the Delay Measurement session is enabled AND SOAM PDUs are sent and/or measurements are collected when the session is running according to the scheduling objects (start time, stop time, etc.).
The value 'false' indicates the Delay Measurement session is disabled AND SOAM PDUs are not sent and/or measurements collected.
For a Delay Measurement session to be removed the row is deleted in order to release internal resources.
This object can written/modified after row creation time.
If the DM session is enabled it resumes after shutdown/restart.
If the DM session is disabled the current Measurement Interval is stopped, if it in process at the time, and all the in process calculations for the partially completed Measurement Interval are finalized.
This object does not affect whether the single-ended Responder is enabled or not, which is enabled or disabled by the jnxSoamPmMepDmSingleEndedResponder object.
What is jnxSoamDmCfgEnabled?
Turns this Delay Measurement session on or off: true means SOAM PDUs are actually sent and/or measurements collected according to the session's scheduling (start time, repetition, etc.), while false stops the session's active probing without deleting its configuration row.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.4 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.4.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgEnabled.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgEnabled OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3 | jnxSoamPmDmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1 | jnxSoamDmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1 | jnxSoamDmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.4 | jnxSoamDmCfgEnabled | JUNIPER-SOAM-PM-MIB |