All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamDmCfgDestMepId
jnxSoamDmCfgDestMepId
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgDestMepId
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.3.1.1.13
Node type: OBJECT-TYPE
Type: Dot1agCfmMepIdOrZero
Access: read-only
Description: The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM DM frame is to be sent.
This address will be used if the value of the column jnxSoamDmDestIsMepId is 'true'. A value of zero means that the destination MEP ID has not been configured.
This object is only valid for the entity transmitting the Delay Measurement frames, types 'dmDmm' and 'dm1DmTx'. It is not applicable for the 'dm1DmRx' type.
This object can only be written at row creation time and cannot be modified once it has been created.
What is jnxSoamDmCfgDestMepId?
The Maintenance Association End Point Identifier of the remote MEP that this session's Delay Measurement frames are sent to; used only when jnxSoamDmCfgDestIsMepId is true, and a value of zero means no destination has been configured yet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.13 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgDestMepId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.3.1.1.13.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgDestMepId.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamDmCfgDestMepId OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3 | jnxSoamPmDmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1 | jnxSoamDmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1 | jnxSoamDmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.13 | jnxSoamDmCfgDestMepId | JUNIPER-SOAM-PM-MIB |