All MIBs › JUNIPER-MPLS-LDP-MIB › jnxMplsLdpSesDiscontinuityTime
jnxMplsLdpSesDiscontinuityTime
Module: JUNIPER-MPLS-LDP-MIB
OID (symbolic): JUNIPER-MPLS-LDP-MIB::jnxMplsLdpSesDiscontinuityTime
OID (numeric): 1.3.6.1.4.1.2636.3.36.1.3.3.1.6
Node type: OBJECT-TYPE
Type: TimeStamp
Access: read-only
Description: The value of sysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity. The relevant counters are the specific instances associated with this session of any Counter32 or Counter64 object contained in the jnxMplsLdpSessionStatsTable.
The initial value of this object is the value of sysUpTime when the entry was created in this table.
Also, a command generator can distinguish when a session between a given Entity and Peer goes away and then is 're-established'. This value would change and thus indicate to the command generator that this is a different session.
What is jnxMplsLdpSesDiscontinuityTime?
The sysUpTime value at the most recent discontinuity in any of this session's Counter32/Counter64 statistics; its initial value is the session's creation time, and a change in it also tells a manager that the session was torn down and re-established rather than being the same continuous session.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.3.3.1.6 snmpwalk -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpSesDiscontinuityTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.3.3.1.6.1 snmpget -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpSesDiscontinuityTime.1
Start monitoring Juniper MPLS-enabled router (PE/P router running LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-MPLS-LDP-MIB::jnxMplsLdpSesDiscontinuityTime OID value, configure state conditions and alerts, and monitor any Juniper MPLS-enabled router (PE/P router running LDP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.36 | jnxMplsLdpMIB | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1 | jnxMplsLdpObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.3 | jnxMplsLdpSessionObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.3.3 | jnxMplsLdpSessionTable | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.3.3.1 | jnxMplsLdpSessionEntry | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.3.3.1.6 | jnxMplsLdpSesDiscontinuityTime | JUNIPER-MPLS-LDP-MIB |