All MIBs › JUNIPER-MPLS-LDP-MIB › jnxMplsLdpPeerPathVectorLimit
jnxMplsLdpPeerPathVectorLimit
Module: JUNIPER-MPLS-LDP-MIB
OID (symbolic): JUNIPER-MPLS-LDP-MIB::jnxMplsLdpPeerPathVectorLimit
OID (numeric): 1.3.6.1.4.1.2636.3.36.1.3.2.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: If the value of this object is 0 (zero) then Loop Dection for Path Vectors for this Peer is disabled.
Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors for this Peer is enabled and the Path Vector Limit is this value.
What is jnxMplsLdpPeerPathVectorLimit?
The Path Vector limit this specific peer is using for loop detection; 0 means Path Vector loop detection is disabled for this peer, while a value above 0 gives the enabled limit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.3.2.1.3 snmpwalk -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpPeerPathVectorLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.3.2.1.3.1 snmpget -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpPeerPathVectorLimit.1
Start monitoring Juniper MPLS-enabled router (PE/P router running LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-MPLS-LDP-MIB::jnxMplsLdpPeerPathVectorLimit OID value, configure state conditions and alerts, and monitor any Juniper MPLS-enabled router (PE/P router running LDP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.36 | jnxMplsLdpMIB | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1 | jnxMplsLdpObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.3 | jnxMplsLdpSessionObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.3.2 | jnxMplsLdpPeerTable | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.3.2.1 | jnxMplsLdpPeerEntry | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.3.2.1.3 | jnxMplsLdpPeerPathVectorLimit | JUNIPER-MPLS-LDP-MIB |