All MIBs › JUNIPER-MPLS-LDP-MIB › jnxMplsLdpLsrLoopDetectionCapable
jnxMplsLdpLsrLoopDetectionCapable
Module: JUNIPER-MPLS-LDP-MIB
OID (symbolic): JUNIPER-MPLS-LDP-MIB::jnxMplsLdpLsrLoopDetectionCapable
OID (numeric): 1.3.6.1.4.1.2636.3.36.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A indication of whether this Label Switching Router supports loop detection.
none(1) -- Loop Detection is not supported on this LSR.
other(2) -- Loop Detection is supported but by a method other than those listed below.
hopCount(3) -- Loop Detection is supported by Hop Count only.
pathVector(4) -- Loop Detection is supported by Path Vector only.
hopCountAndPathVector(5) -- Loop Detection is supported by both Hop Count And Path Vector.
Since Loop Detection is determined during Session Initialization, an individual session may not be running with loop detection. This object simply gives an indication of whether or not the LSR has the ability to support Loop Detection and which types.
What is jnxMplsLdpLsrLoopDetectionCapable?
Reports which loop-detection method(s) this LSR supports: none, hop count only, path vector only, or both. Since loop detection is negotiated per-session at initialization, this object only indicates capability, not whether any particular session is actually running with loop detection enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.1.2 snmpwalk -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpLsrLoopDetectionCapable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.1.2.1 snmpget -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpLsrLoopDetectionCapable.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxMplsLdpLsrLoopDetectionCapable.1
Start monitoring Juniper MPLS-enabled router (PE/P router running LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-MPLS-LDP-MIB::jnxMplsLdpLsrLoopDetectionCapable OID value, configure state conditions and alerts, and monitor any Juniper MPLS-enabled router (PE/P router running LDP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.36 | jnxMplsLdpMIB | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1 | jnxMplsLdpObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.1 | jnxMplsLdpLsrObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.1.2 | jnxMplsLdpLsrLoopDetectionCapable | JUNIPER-MPLS-LDP-MIB |