All MIBs › JUNIPER-MPLS-LDP-MIB › jnxMplsLdpEntityPathVectorLimit
jnxMplsLdpEntityPathVectorLimit
Module: JUNIPER-MPLS-LDP-MIB
OID (symbolic): JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityPathVectorLimit
OID (numeric): 1.3.6.1.4.1.2636.3.36.1.2.3.1.14
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled.
Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors is enabled, and the Path Vector Limit is this value. Also, the value of the object, 'jnxMplsLdpLsrLoopDetectionCapable', must be set to either 'pathVector(4)' or 'hopCountAndPathVector(5)', if this object has a value greater than 0 (zero), otherwise it is ignored.
What is jnxMplsLdpEntityPathVectorLimit?
The Path Vector limit (0-255) for loop detection on this entity; 0 disables Path Vector loop detection, while a value above 0 enables it and sets the limit, provided jnxMplsLdpLsrLoopDetectionCapable indicates pathVector or hopCountAndPathVector support. It's read-only in this implementation despite the read-create marking in the SEQUENCE.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.2.3.1.14 snmpwalk -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityPathVectorLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.2.3.1.14.1 snmpget -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityPathVectorLimit.1
Start monitoring Juniper MPLS-enabled router (PE/P router running LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityPathVectorLimit OID value, configure state conditions and alerts, and monitor any Juniper MPLS-enabled router (PE/P router running LDP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.36 | jnxMplsLdpMIB | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1 | jnxMplsLdpObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2 | jnxMplsLdpEntityObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3 | jnxMplsLdpEntityTable | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3.1 | jnxMplsLdpEntityEntry | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3.1.14 | jnxMplsLdpEntityPathVectorLimit | JUNIPER-MPLS-LDP-MIB |