All MIBs › JUNIPER-MPLS-LDP-MIB › jnxMplsLdpEntityInitSesThreshold
jnxMplsLdpEntityInitSesThreshold
Module: JUNIPER-MPLS-LDP-MIB
OID (symbolic): JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityInitSesThreshold
OID (numeric): 1.3.6.1.4.1.2636.3.36.1.2.3.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'jnxMplsLdpInitSesThresholdExceeded', when the number of Session Initialization messages sent exceeds this threshold. The notification is used to notify an operator when this Entity and its Peer are possibily engaged in an endless sequence of messages as each NAKs the other's Initialization messages with Error Notification messages. Setting this threshold which triggers the notification is one way to notify the operator.
A value of 0 (zero) for this object indicates that the threshold is infinity, thus the SNMP notification will never be generated.
What is jnxMplsLdpEntityInitSesThreshold?
The number of Session Initialization messages this entity can send to a peer (0-100, default 8) before triggering the jnxMplsLdpInitSesThresholdExceeded notification, which warns that the entity and peer may be stuck endlessly NAK'ing each other's Initialization messages; 0 disables the notification entirely. It's read-only in this implementation despite the read-create marking in the SEQUENCE.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.2.3.1.11 snmpwalk -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityInitSesThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.2.3.1.11.1 snmpget -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityInitSesThreshold.1
Start monitoring Juniper MPLS-enabled router (PE/P router running LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityInitSesThreshold OID value, configure state conditions and alerts, and monitor any Juniper MPLS-enabled router (PE/P router running LDP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.36 | jnxMplsLdpMIB | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1 | jnxMplsLdpObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2 | jnxMplsLdpEntityObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3 | jnxMplsLdpEntityTable | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3.1 | jnxMplsLdpEntityEntry | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3.1.11 | jnxMplsLdpEntityInitSesThreshold | JUNIPER-MPLS-LDP-MIB |