All MIBs › JUNIPER-MPLS-LDP-MIB › jnxMplsLdpEntityHelloHoldTimer
jnxMplsLdpEntityHelloHoldTimer
Module: JUNIPER-MPLS-LDP-MIB
OID (symbolic): JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityHelloHoldTimer
OID (numeric): 1.3.6.1.4.1.2636.3.36.1.2.3.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds.
An LSR maintains a record of Hellos received from potential peers. This object represents the Hold Time in the Common Hello Parameters TLV of the Hello Message.
A value of 0 is a default value and should be interpretted in conjunction with the jnxMplsLdpEntityTargetPeer object.
If the value of this object is 0: if the value of the jnxMplsLdpEntityTargetPeer object is false(2), then this
specifies that the Hold Time's actual default value is 15 seconds (i.e. the default Hold time for Link Hellos is 15 seconds). Otherwise if the value of the jnxMplsLdpEntityTargetPeer object is true(1), then this specifies that the Hold Time's actual default value is 45 seconds (i.e. the default Hold time for Targeted Hellos is 45 seconds).
A value of 65535 means infinite (i.e. wait forever).
All other values represent the amount of time in seconds to wait for a Hello Message. Setting the hold time to a value smaller than 15 is not recommended, although not forbidden according to [RFC3036].
What is jnxMplsLdpEntityHelloHoldTimer?
The Hello hold timer (0-65535 seconds) this entity proposes in its Hello messages; a value of 0 defaults to 15 seconds for link Hellos or 45 seconds for targeted Hellos (per jnxMplsLdpEntityTargetPeer), while 65535 means wait forever. It's read-only in this implementation, reporting the operating value rather than accepting SNMP configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.2.3.1.10 snmpwalk -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityHelloHoldTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.36.1.2.3.1.10.1 snmpget -v2c -c public <target> JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityHelloHoldTimer.1
Start monitoring Juniper MPLS-enabled router (PE/P router running LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-MPLS-LDP-MIB::jnxMplsLdpEntityHelloHoldTimer OID value, configure state conditions and alerts, and monitor any Juniper MPLS-enabled router (PE/P router running LDP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.36 | jnxMplsLdpMIB | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1 | jnxMplsLdpObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2 | jnxMplsLdpEntityObjects | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3 | jnxMplsLdpEntityTable | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3.1 | jnxMplsLdpEntityEntry | JUNIPER-MPLS-LDP-MIB |
| 1.3.6.1.4.1.2636.3.36.1.2.3.1.10 | jnxMplsLdpEntityHelloHoldTimer | JUNIPER-MPLS-LDP-MIB |