All MIBs › JNX-MPLS-TE-P2MP-STD-MIB › jnxMplsTeP2mpTunnelTotalMaxHops
jnxMplsTeP2mpTunnelTotalMaxHops
Module: JNX-MPLS-TE-P2MP-STD-MIB
OID (symbolic): JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelTotalMaxHops
OID (numeric): 1.3.6.1.4.1.2636.5.7.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The maximum number of hops that can be specified for an entire P2MP tunnel on this device. This object should be used in conjunction with mplsTunnelMaxHops in
MPLS-TE-STD-MIB that is used in the context of P2MP tunnels to express the maximum number of hops to any individual destination of a P2MP tunnel that can be configured on this device. mplsTeP2mpTunnelTotalMaxHops would normally be set larger than or equal to mplsTunnelMaxHops.
What is jnxMplsTeP2mpTunnelTotalMaxHops?
The largest number of hops that can be configured for an entire P2MP tunnel on this device, used alongside mplsTunnelMaxHops (which caps the hop count to any single destination) — this value should normally be set greater than or equal to that per-destination limit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.1.3 snmpwalk -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelTotalMaxHops
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.1.3.1 snmpget -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelTotalMaxHops.1
Start monitoring Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelTotalMaxHops OID value, configure state conditions and alerts, and monitor any Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.7 | jnxP2mpExperiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.7.1 | jnxMplsTeP2mpStdMIB | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.1 | jnxMplsTeP2mpScalars | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.1.3 | jnxMplsTeP2mpTunnelTotalMaxHops | JNX-MPLS-TE-P2MP-STD-MIB |