All MIBs › JNX-MPLS-TE-P2MP-STD-MIB › jnxMplsTeP2mpTunnelSubGroupIDNext
jnxMplsTeP2mpTunnelSubGroupIDNext
Module: JNX-MPLS-TE-P2MP-STD-MIB
OID (symbolic): JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelSubGroupIDNext
OID (numeric): 1.3.6.1.4.1.2636.5.7.1.2.2
Node type: OBJECT-TYPE
Type: IndexIntegerNextFree
Access: read-only
Description: This object contains an unused value for mplsTeP2mpTunnelDestSubGroupID, or a zero to indicate that none exists. Negative values are not allowed, as they do not correspond to valid values of mplsTeP2mpTunnelDestSubGroupID.
Note that this object offers an unused value for an mplsTeP2mpTunnelDestSubGroupID value at the local LSR when it is a sub-group originator. In other cases, the value of mplsTeP2mpTunnelDestSubGroupID SHOULD be taken from the received value signaled by the signaling protocol and
corresponds to the value in mplsTeP2mpTunnelDestSrcSubGroupID.
What is jnxMplsTeP2mpTunnelSubGroupIDNext?
Returns an unused sub-group ID value (or zero if none is available) for use when this local LSR is originating a new P2MP sub-group, saving an admin from having to guess at a free numeric ID when adding a destination.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.2 snmpwalk -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelSubGroupIDNext
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.2.1 snmpget -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelSubGroupIDNext.1
Start monitoring Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelSubGroupIDNext OID value, configure state conditions and alerts, and monitor any Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.7 | jnxP2mpExperiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.7.1 | jnxMplsTeP2mpStdMIB | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2 | jnxMplsTeP2mpObjects | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2.2 | jnxMplsTeP2mpTunnelSubGroupIDNext | JNX-MPLS-TE-P2MP-STD-MIB |