JNX-MPLS-TE-P2MP-STD-MIB :: jnxMplsTeP2mpTunnelNotificationEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JNX-MPLS-TE-P2MP-STD-MIB › jnxMplsTeP2mpTunnelNotificationEnable

jnxMplsTeP2mpTunnelNotificationEnable

Module: JNX-MPLS-TE-P2MP-STD-MIB

OID (symbolic): JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelNotificationEnable

OID (numeric): 1.3.6.1.4.1.2636.5.7.1.2.5

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: If this object is true(1), then it enables the generation of mplsTeP2mpTunnelDestUp and mplsTeP2mpTunnelDestDown notifications. Otherwise these notifications are not emitted.

Note that when tunnels have large numbers of destinations, setting this object to true(1) may result in the generation of large numbers of notifications.

What is jnxMplsTeP2mpTunnelNotificationEnable?

Enables or disables the jnxMplsTeP2mpTunnelDestUp/Down notifications; the MIB itself warns that turning this on for tunnels with many destinations can generate large numbers of traps, so enable it selectively rather than globally on a busy head-end.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.5
snmpwalk -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelNotificationEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.5.1
snmpget -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelNotificationEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2636.5.7.1.2.5.1 s <value>

Start monitoring Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelNotificationEnable OID value, configure state conditions and alerts, and monitor any Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.5jnxExperimentJUNIPER-EXPERIMENT-MIB
1.3.6.1.4.1.2636.5.7jnxP2mpExperimentJUNIPER-EXPERIMENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2636.5.7.1jnxMplsTeP2mpStdMIBJNX-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.2636.5.7.1.2jnxMplsTeP2mpObjectsJNX-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.2636.5.7.1.2.5jnxMplsTeP2mpTunnelNotificationEnableJNX-MPLS-TE-P2MP-STD-MIB