All MIBs › JNX-MPLS-TE-P2MP-STD-MIB › jnxMplsTeP2mpTunnelDestCHopTableIndex
jnxMplsTeP2mpTunnelDestCHopTableIndex
Module: JNX-MPLS-TE-P2MP-STD-MIB
OID (symbolic): JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelDestCHopTableIndex
OID (numeric): 1.3.6.1.4.1.2636.5.7.1.2.3.1.12
Node type: OBJECT-TYPE
Type: MplsPathIndexOrZero
Access: read-only
Description: Index into the mplsTunnelCHopTable that identifies the explicit path for this destination of the P2MP tunnel.
This path is based on the chosen configured path identified by mplsTeP2mpTunnelDestHopTableIndex and mplsTeP2mpTunnelDestPathInUse, but may have been modified and automatically updated by the agent when computed hops become available or when computed hops get modified.
If this destination is the destination of the 'first S2L sub-LSP' then this path will be signaled in the Explicit Route Object. If this destination is the destination of a 'subsequent S2L sub-LSP' then this path will be signaled in a Secondary Explicit Route Object.
What is jnxMplsTeP2mpTunnelDestCHopTableIndex?
Index into mplsTunnelCHopTable giving the computed explicit path actually signaled to this destination, which may differ slightly from the administratively configured path if the agent had to resolve or update hops automatically.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.3.1.12 snmpwalk -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelDestCHopTableIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.3.1.12.1 snmpget -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelDestCHopTableIndex.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxMplsTeP2mpTunnelDestCHopTableIndex.1
Start monitoring Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelDestCHopTableIndex OID value, configure state conditions and alerts, and monitor any Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.7 | jnxP2mpExperiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.7.1 | jnxMplsTeP2mpStdMIB | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2 | jnxMplsTeP2mpObjects | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2.3 | jnxMplsTeP2mpTunnelDestTable | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2.3.1 | jnxMplsTeP2mpTunnelDestEntry | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2.3.1.12 | jnxMplsTeP2mpTunnelDestCHopTableIndex | JNX-MPLS-TE-P2MP-STD-MIB |