All MIBs › JNX-MPLS-TE-P2MP-STD-MIB › jnxMplsTeP2mpTunnelDestBranchOutSegment
jnxMplsTeP2mpTunnelDestBranchOutSegment
Module: JNX-MPLS-TE-P2MP-STD-MIB
OID (symbolic): JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelDestBranchOutSegment
OID (numeric): 1.3.6.1.4.1.2636.5.7.1.2.3.1.9
Node type: OBJECT-TYPE
Type: MplsIndexType
Access: read-only
Description: This object identifies the outgoing branch from this LSR towards the destination represented by this table entry. It must be a unique identifier within the scope of this tunnel.
If MPLS-LSR-STD-MIB is implemented, this object should contain an index into mplsOutSegmentTable.
If MPLS-LSR-STD-MIB is not implemented, the LSR should assign a unique value to each branch of the tunnel.
The value of this object is also used as an index into mplsTeP2mpTunnelBranchPerfTable.
What is jnxMplsTeP2mpTunnelDestBranchOutSegment?
Identifies the outgoing branch (out-segment) from this LSR toward a particular P2MP tunnel destination — typically an index into mplsOutSegmentTable — and is also used to look up per-branch traffic counters in jnxMplsTeP2mpTunnelBranchPerfTable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.3.1.9 snmpwalk -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelDestBranchOutSegment
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.3.1.9.1 snmpget -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelDestBranchOutSegment.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxMplsTeP2mpTunnelDestBranchOutSegment.1
Start monitoring Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelDestBranchOutSegment OID value, configure state conditions and alerts, and monitor any Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.7 | jnxP2mpExperiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.7.1 | jnxMplsTeP2mpStdMIB | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2 | jnxMplsTeP2mpObjects | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2.3 | jnxMplsTeP2mpTunnelDestTable | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2.3.1 | jnxMplsTeP2mpTunnelDestEntry | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.2.3.1.9 | jnxMplsTeP2mpTunnelDestBranchOutSegment | JNX-MPLS-TE-P2MP-STD-MIB |