All MIBs › JNX-MPLS-TE-P2MP-STD-MIB › jnxMplsTeP2mpTunnelConfigured
jnxMplsTeP2mpTunnelConfigured
Module: JNX-MPLS-TE-P2MP-STD-MIB
OID (symbolic): JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelConfigured
OID (numeric): 1.3.6.1.4.1.2636.5.7.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of P2MP tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus in MPLS-TE-STD-MIB is active(1).
What is jnxMplsTeP2mpTunnelConfigured?
Count of point-to-multipoint MPLS-TE tunnels configured on this router — a tunnel counts once its mplsTunnelRowStatus in MPLS-TE-STD-MIB is active(1) — giving a quick capacity/inventory check without walking the full tunnel table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.1.1 snmpwalk -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelConfigured
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.1.1.1 snmpget -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelConfigured.1
Start monitoring Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelConfigured OID value, configure state conditions and alerts, and monitor any Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.7 | jnxP2mpExperiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.7.1 | jnxMplsTeP2mpStdMIB | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.1 | jnxMplsTeP2mpScalars | JNX-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.2636.5.7.1.1.1 | jnxMplsTeP2mpTunnelConfigured | JNX-MPLS-TE-P2MP-STD-MIB |