JNX-MPLS-TE-P2MP-STD-MIB :: jnxMplsTeP2mpTunnelBranchPerfHCBytes

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JNX-MPLS-TE-P2MP-STD-MIB › jnxMplsTeP2mpTunnelBranchPerfHCBytes

jnxMplsTeP2mpTunnelBranchPerfHCBytes

Module: JNX-MPLS-TE-P2MP-STD-MIB

OID (symbolic): JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelBranchPerfHCBytes

OID (numeric): 1.3.6.1.4.1.2636.5.7.1.2.4.1.6

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: High capacity counter for number of bytes forwarded by the tunnel onto this branch. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTime.

What is jnxMplsTeP2mpTunnelBranchPerfHCBytes?

High-capacity (64-bit) counter of bytes forwarded by this LSR onto a specific P2MP tunnel branch, used for accurate throughput measurement on high-bandwidth branches where the 32-bit counter would wrap too often.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.4.1.6
snmpwalk -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelBranchPerfHCBytes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.7.1.2.4.1.6.1
snmpget -v2c -c public <target> JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelBranchPerfHCBytes.1

Start monitoring Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpTunnelBranchPerfHCBytes OID value, configure state conditions and alerts, and monitor any Juniper Networks MPLS router, MX/PTX-series (P2MP TE LSPs) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.5jnxExperimentJUNIPER-EXPERIMENT-MIB
1.3.6.1.4.1.2636.5.7jnxP2mpExperimentJUNIPER-EXPERIMENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2636.5.7.1jnxMplsTeP2mpStdMIBJNX-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.2636.5.7.1.2jnxMplsTeP2mpObjectsJNX-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.2636.5.7.1.2.4jnxMplsTeP2mpTunnelBranchPerfTableJNX-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.2636.5.7.1.2.4.1jnxMplsTeP2mpTunnelBranchPerfEntryJNX-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.2636.5.7.1.2.4.1.6jnxMplsTeP2mpTunnelBranchPerfHCBytesJNX-MPLS-TE-P2MP-STD-MIB