All MIBs › HYTERA-REPEATER-MIB
Category: Domain: Wireless, Technology: Wireless, Vendor: Hytera
Description: Hytera MIB for managing digital radio repeater equipment including operational status, channel configuration, and alarm notifications.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HYTERA-REPEATER-MIB?
HYTERA-REPEATER-MIB is a vendor-specific SNMP module from Hytera for managing digital radio repeater equipment used in professional mobile radio (PMR) and DMR communication systems. It exposes objects covering the repeater's channel/product configuration alongside a rich set of RF and environmental monitoring parameters and alarm notifications. The MIB is heavily oriented toward monitoring the hardware health of the repeater: it reports power-supply voltage, battery voltage, PA (power amplifier) temperature, and fan speed as continuous readings, alongside dedicated alarm objects (rptVoltageAlarm, rptTemperatureAlarm, rptFanAlarm, rptBatteryVoltageAlarm) plus RF-specific fault conditions such as rptForwardAlarm, rptReflectedAlarm, rptVswrAlarm (standing-wave-ratio faults indicating antenna/feedline problems), and PLL lock alarms (rptTxPllAlarm, rptRxPllAlarm) for the transmit/receive synthesizer. This MIB has no evident dependency on other MIBs - it defines a self-contained private enterprise tree (hyteraRepeaterMIB) for the product. It is typically deployed on standalone or networked Hytera digital repeater sites (e.g., mountaintop or tower installations) where remote hardware-health monitoring is critical due to limited physical site access, and a HYTERA-REPEATER-MIB download is often the first step engineers take to load the module into their monitoring tools.
IPNetwork Monitor allows you to monitor SNMP objects defined in HYTERA-REPEATER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Hytera digital radio repeater
Monitoring Examples
An operator monitoring a remote repeater site would poll rptVoltage and rptPaTemprature alongside rptFanSpeed to track power and thermal health, and would watch rptVswrAlarm and rptReflectedAlarm to detect a developing antenna or feedline fault before it causes an outage; a rise in rptTxPllAlarm or rptRxPllAlarm would flag a synthesizer lock failure requiring a site visit. These objects sit under the hyteraRepeaterMIB product/repeater subtree.
What Can Be Monitored
- supply/battery voltage
- PA temperature
- fan speed
- forward/reflected RF power alarms
- VSWR alarm
- TX/RX PLL lock alarms
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| TimeTicks | |
| enterprises | |
| private |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hyteraRepeaterMIB | 1.3.6.1.4.1.40297 | |||
| product | 1.3.6.1.4.1.40297.1 | |||
| repeater | 1.3.6.1.4.1.40297.1.2 | |||
| rptRealTimeInfo | 1.3.6.1.4.1.40297.1.2.1 | |||
| rptAlarmInfo | 1.3.6.1.4.1.40297.1.2.1.1 | |||
| INT rptVoltageAlarm | 1.3.6.1.4.1.40297.1.2.1.1.1 | INTEGER | read-only | The voltage alarm. normal(0), low voltage alarm(1), high voltage alarm(2), abnormal(3). The abnormal condition is used for RD960. For the RD960 do not distinguish low voltage alarm and high voltage alarm, we use abnormal to replace them. |
| INT rptTemperatureAlarm | 1.3.6.1.4.1.40297.1.2.1.1.2 | INTEGER | read-only | The temperature alarm. normal(0), low temperature alarm(1), high temperature alarm(2). |
| INT rptFanAlarm | 1.3.6.1.4.1.40297.1.2.1.1.3 | INTEGER | read-only | The fan alarm. normal(0), alarm(1). The object is not supported yet. |
| INT rptForwardAlarm | 1.3.6.1.4.1.40297.1.2.1.1.4 | INTEGER | read-only | The forward power alarm. undefined(-1), normal(0), alarm(1). The object is not supported yet. |
| INT rptReflectedAlarm | 1.3.6.1.4.1.40297.1.2.1.1.5 | INTEGER | read-only | The reflected power alarm. undefined(-1), normal(0), alarm(1). The object is not supported yet. |
| INT rptVswrAlarm | 1.3.6.1.4.1.40297.1.2.1.1.6 | INTEGER | read-only | The voltage standing wave radio alarm. normal(0), alarm(1). |
| INT rptTxPllAlarm | 1.3.6.1.4.1.40297.1.2.1.1.7 | INTEGER | read-only | The transmitting PLL alarm. normal(0), alarm(1). |
| INT rptRxPllAlarm | 1.3.6.1.4.1.40297.1.2.1.1.8 | INTEGER | read-only | The receiving PLL alarm. normal(0), alarm(1). |
| INT rptBatteryVoltageAlarm | 1.3.6.1.4.1.40297.1.2.1.1.9 | INTEGER | read-only | The battery voltage alarm. normal(0), abnormal(1). |
| rptDataInfo | 1.3.6.1.4.1.40297.1.2.1.2 | |||
| OCT rptVoltage | 1.3.6.1.4.1.40297.1.2.1.2.1 | OCTET STRING | read-only | The voltage. It should be changed to float format. If the repeater is rd620 and rd960, the value is invalid. |
| OCT rptPaTemprature | 1.3.6.1.4.1.40297.1.2.1.2.2 | OCTET STRING | read-only | The temperature. It should be changed to float format. The value is invalid, if the repeater is rd960. |
| INT rptFanSpeed | 1.3.6.1.4.1.40297.1.2.1.2.3 | INTEGER | read-only | The fan speed. The object is not supported yet. |
| OCT rptVswr | 1.3.6.1.4.1.40297.1.2.1.2.4 | OCTET STRING | read-only | The VSWR. It should be changed to float format. |
| OCT rptTxFwdPower | 1.3.6.1.4.1.40297.1.2.1.2.5 | OCTET STRING | read-only | The forward power. It should be changed to float format. The value is invalid, if the repeater is rd960 or rd620. |
| OCT rptTxRefPower | 1.3.6.1.4.1.40297.1.2.1.2.6 | OCTET STRING | read-only | The reflected power. It should be changed to float format. The value is invalid, if the repeater is rd960 or rd620. |
| OCT rptDataInfoBak1 | 1.3.6.1.4.1.40297.1.2.1.2.7 | OCTET STRING | read-only | The backup object. The object is not supported yet. |
| OCT rptDataInfoBak2 | 1.3.6.1.4.1.40297.1.2.1.2.8 | OCTET STRING | read-only | The backup object. The object is not supported yet. |
| INT rptSlot1Rssi | 1.3.6.1.4.1.40297.1.2.1.2.9 | INTEGER | read-only | The RSSI value of slot1. unit: dB. |
| INT rptSlot2Rssi | 1.3.6.1.4.1.40297.1.2.1.2.10 | INTEGER | read-only | The RSSI value of slot2. unit: dB. The value is valid only in digital model. |
| INT rptSupplyPowerType | 1.3.6.1.4.1.40297.1.2.1.2.11 | INTEGER | read-only | The type of power. DC(0), Battery(1). |
| INT rptBatteryConnect | 1.3.6.1.4.1.40297.1.2.1.2.12 | INTEGER | read-only | The battery connecting condition. disconnected(0), connected(1). |
| OCT rptBatteryVoltage | 1.3.6.1.4.1.40297.1.2.1.2.13 | OCTET STRING | read-only | The battery voltage. The object is not supported yet. |
| rptControl | 1.3.6.1.4.1.40297.1.2.2 | |||
| INT rptRestart | 1.3.6.1.4.1.40297.1.2.2.1 | INTEGER | read-write | Restart the repeater. do nothing(0), reset(1). |
| INT rptChannelNumber | 1.3.6.1.4.1.40297.1.2.2.2 | INTEGER | read-write | The current channel number in the zone. |
| INT rptChannelType | 1.3.6.1.4.1.40297.1.2.2.3 | INTEGER | read-only | The current channel type. digital(0), analog(1), mixed(2). |
| INT rptControlObjBak1 | 1.3.6.1.4.1.40297.1.2.2.4 | INTEGER | read-only | The backup object. The object is not supported yet. |
| INT rptTxPowerLevel | 1.3.6.1.4.1.40297.1.2.2.5 | INTEGER | read-write | The transmit power level. high(0), low(2). |
| INT rptKnockdown | 1.3.6.1.4.1.40297.1.2.2.6 | INTEGER | read-write | The status of repeating. repeating(0), knockdown(1). |
| INT rptRadioState | 1.3.6.1.4.1.40297.1.2.2.7 | INTEGER | read-write | The status of the repeater's normal function. enable(0), disable(1). |
| IP rptSnmpTrapIp | 1.3.6.1.4.1.40297.1.2.2.8 | IpAddress | read-write | The SNMP trapping IP address. The default value is 230.37.0.0. |
| INT rptSnmpTrapPort | 1.3.6.1.4.1.40297.1.2.2.9 | INTEGER | read-only | The SNMP trapping port. |
| rptchannelParaTable | 1.3.6.1.4.1.40297.1.2.2.10 | not-accessible | The table of channel's parameters relevant to the repeater's channels. | |
| channelParaEntry | 1.3.6.1.4.1.40297.1.2.2.10.1 | not-accessible | The channel's parameters for one of the repeater's channels. | |
| INT channelParaIndex | 1.3.6.1.4.1.40297.1.2.2.10.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the channel's parameters. |
| OCT actChannelAlias | 1.3.6.1.4.1.40297.1.2.2.10.1.2 | OCTET STRING | read-only | The channel alias. It is an unicode string |
| INT actChannelType | 1.3.6.1.4.1.40297.1.2.2.10.1.3 | INTEGER | read-only | The channel type. digital(0), analog(1), mixed(2). |
| INT actTxPower | 1.3.6.1.4.1.40297.1.2.2.10.1.4 | INTEGER | read-only | The transmit power level. high(0), low(2). |
| INT actChannelNo | 1.3.6.1.4.1.40297.1.2.2.10.1.5 | INTEGER | read-only | The channel number in the repeater's zone. |
| INT actChannelSubNo | 1.3.6.1.4.1.40297.1.2.2.10.1.6 | INTEGER | read-only | The channel number in the group of same type. |
| INT rptForbid | 1.3.6.1.4.1.40297.1.2.2.11 | INTEGER | read-write | The status of the repeater's all function. nomal(0), forbid(1). If the repeater is forbided, you can only wake up it by setting the rptRadioStatus object to 0 in local RDAC model. |
| rptLog | 1.3.6.1.4.1.40297.1.2.3 | |||
| logTable | 1.3.6.1.4.1.40297.1.2.3.1 | not-accessible | The table of alarm records. | |
| logEntry | 1.3.6.1.4.1.40297.1.2.3.1.1 | not-accessible | The record's content. | |
| INT logIndex | 1.3.6.1.4.1.40297.1.2.3.1.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the alram record. |
| INT alarmName | 1.3.6.1.4.1.40297.1.2.3.1.1.2 | INTEGER | read-only | The alarm name. temperature alarm(0), fan alarm(1), vswr alarm(2), low forward power alarm(3), low voltage alarm(4), high voltage alarm(5), tx unlock alarm(6), rx unlock alarm(7), battery voltage alarm(8), invalid(65535). |
| INT alarmStatus | 1.3.6.1.4.1.40297.1.2.3.1.1.3 | INTEGER | read-only | The alarm status. alarm recove(0), alarm happen(1), invalid(65535). |
| INT logTime | 1.3.6.1.4.1.40297.1.2.3.1.1.4 | INTEGER | read-only | The alarm time. unit: second. The time is the time lapsed since the repeater starting up. If the value is -1, the record is invalid. |
| INT clearLog | 1.3.6.1.4.1.40297.1.2.3.2 | INTEGER | read-write | Clear the log. do nothing(0), clear log(0). |
| INT recordCount | 1.3.6.1.4.1.40297.1.2.3.3 | INTEGER | read-only | The number of records. |
| INT latestRecordPosition | 1.3.6.1.4.1.40297.1.2.3.4 | INTEGER | read-only | The row number of the latest record. If the value is 0, there is no valid record in the table. |
| rptSystemInfo | 1.3.6.1.4.1.40297.1.2.4 | |||
| OCT rptModelName | 1.3.6.1.4.1.40297.1.2.4.1 | OCTET STRING | read-only | The model name. It is an unicode string. |
| OCT rptModelNo | 1.3.6.1.4.1.40297.1.2.4.2 | OCTET STRING | read-only | The model number. It is an unicode string. |
| OCT rptFirmwareVersion | 1.3.6.1.4.1.40297.1.2.4.3 | OCTET STRING | read-only | The firmware version. It is an unicode string. |
| OCT rptRcdbVersion | 1.3.6.1.4.1.40297.1.2.4.4 | OCTET STRING | read-only | The RCDB version. It is an unicode string. |
| OCT rptSerialNo | 1.3.6.1.4.1.40297.1.2.4.5 | OCTET STRING | read-only | The serial number. It is an unicode string. |
| OCT rptRadioAlias | 1.3.6.1.4.1.40297.1.2.4.6 | OCTET STRING | read-only | The repeater alias. It is an unicode string. |
| INT rptRadioID | 1.3.6.1.4.1.40297.1.2.4.7 | INTEGER | read-only | The ID of the repeater. |
| INT rptCurChannelType | 1.3.6.1.4.1.40297.1.2.4.8 | INTEGER | read-only | The type of the wroking channel. digital(0), analog(1), mixed(2). |
| OCT rptChannelName | 1.3.6.1.4.1.40297.1.2.4.9 | OCTET STRING | read-only | The name of the current channel. It is an unicode string. |
| INT rptCurTxFreq | 1.3.6.1.4.1.40297.1.2.4.10 | INTEGER | read-only | The current transmitting frequency. unit: Hz. |
| INT rptCurRxFreq | 1.3.6.1.4.1.40297.1.2.4.11 | INTEGER | read-only | The current receiving frequency. unit: Hz. |
| INT rptWorkState | 1.3.6.1.4.1.40297.1.2.4.12 | INTEGER | read-only | The work status of the repeater. receive(0), transmit(1). |
| OCT rptCurZoneAlias | 1.3.6.1.4.1.40297.1.2.4.13 | OCTET STRING | read-only | The alias of the current zone. It is an unicode string. |
| rptConfiguration | 1.3.6.1.4.1.40297.1.2.5 | |||
| rptBasicSetting | 1.3.6.1.4.1.40297.1.2.5.1 | |||
| powerOn | 1.3.6.1.4.1.40297.1.2.5.1.1 | |||
| INT designatedPowerOnChn | 1.3.6.1.4.1.40297.1.2.5.1.1.1 | INTEGER | read-write | Designate the power on channel. disable(0), enable(1). |
| INT powerOnChannelNo | 1.3.6.1.4.1.40297.1.2.5.1.1.2 | INTEGER | read-write | The the power on channel number. invalid(65535). |
| microphone | 1.3.6.1.4.1.40297.1.2.5.1.2 | |||
| INT internalMicGain | 1.3.6.1.4.1.40297.1.2.5.1.2.1 | INTEGER | read-write | The gain of the internal microphone. It is double of the real value. |
| INT externalMicGain | 1.3.6.1.4.1.40297.1.2.5.1.2.2 | INTEGER | read-write | The gain of the external microphone. It is double of the real value. |
| multiCTCCDCTable | 1.3.6.1.4.1.40297.1.2.5.1.3 | not-accessible | The table of subaudio frequency. | |
| multiCTCCDCEntry | 1.3.6.1.4.1.40297.1.2.5.1.3.1 | not-accessible | The subaudio frequency. | |
| INT ctcssIndex | 1.3.6.1.4.1.40297.1.2.5.1.3.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the subaudio frequency. |
| INT txCtcssFrequency | 1.3.6.1.4.1.40297.1.2.5.1.3.1.2 | INTEGER | read-write | The transmitting subaudio frequency. The value is limitted to the range. The range is changed with the type: 0 (txCtcssType: none) 19~492 (txCtcssType: CDCSS or CDCSS invert) 670~2541 (txCtcssType: CTCSS) The value is 10 times of the real value when the type is CTCSS. The value in first row is unable to be set. It's not able to be set, unless the rxCtcssType in the same row is not none. It will be set to the matched minimum available value automatically, when the txCtcssType in the same row is changed. |
| INT txCtcssType | 1.3.6.1.4.1.40297.1.2.5.1.3.1.3 | INTEGER | read-write | The type of the transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). The value in first row is unable to be set. It's not able to be set, unless the rxCtcssType in the same row is not none. |
| INT rxCtcssFrequency | 1.3.6.1.4.1.40297.1.2.5.1.3.1.4 | INTEGER | read-write | The receiving subaudio frequency. The value is limitted to the range and is not allowed to duplicate but 0. The range is changed with the type:0 0 (rxCtcssType: none) 19~492 (rxCtcssType: CDCSS or CDCSS invert) 670~2541 (rxCtcssType: CTCSS) The value is 10 times of the real value when the type is CTCSS. The value in first row is unable to be set. It will be set to the matched minimum available value automatically, when the rxCtcssType in the same row is changed. |
| INT rxCtcssType | 1.3.6.1.4.1.40297.1.2.5.1.3.1.5 | INTEGER | read-write | The type of the receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). It must be set according to line sequence. The value in first row is unable to be set. |
| audioPriority | 1.3.6.1.4.1.40297.1.2.5.1.4 | |||
| INT pathPriority | 1.3.6.1.4.1.40297.1.2.5.1.4.1 | INTEGER | read-write | The transmit path priority. PTT request(0), repeat request(1), first come first send(2). |
| INT pttPriority | 1.3.6.1.4.1.40297.1.2.5.1.4.2 | INTEGER | read-write | The PTT priority. external PTT(0), front PTT(1), remote PTT(2), first come first send(3). |
| INT jitterBufferLenth | 1.3.6.1.4.1.40297.1.2.5.1.5 | INTEGER | read-write | The jitter buffer length. |
| INT analogCallHangTime | 1.3.6.1.4.1.40297.1.2.5.1.6 | INTEGER | read-write | The analog call hang time. unit: second. |
| INT repeatRequestPriority | 1.3.6.1.4.1.40297.1.2.5.1.7 | INTEGER | read-write | The repeat request priority. local repeating(0), IP connect repeating(1), first come first send(2). |
| rptDigitalChannelSetting | 1.3.6.1.4.1.40297.1.2.5.2 | |||
| digitalChnTable | 1.3.6.1.4.1.40297.1.2.5.2.1 | not-accessible | The table of digital channel's configuration parameters relevant to the repeater's digital channels. | |
| digitalChnEntry | 1.3.6.1.4.1.40297.1.2.5.2.1.1 | not-accessible | The digital channel's configuration parameters for one of the repeater's digital channels. | |
| INT digitalChnIndex | 1.3.6.1.4.1.40297.1.2.5.2.1.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the digital channel's parameter. It also represents the channel number which is counted from 1. |
| INT digitalColorCode | 1.3.6.1.4.1.40297.1.2.5.2.1.1.2 | INTEGER | read-write | The color code. |
| INT digitalIpMultisiteConnect | 1.3.6.1.4.1.40297.1.2.5.2.1.1.3 | INTEGER | read-write | The multisite connecting based on network. None(0), slot1(1), slot2(2), slot1&slot2(3). |
| INT digitalReceiveFrequency | 1.3.6.1.4.1.40297.1.2.5.2.1.1.4 | INTEGER | read-write | The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. |
| INT digitalTransmitFrequency | 1.3.6.1.4.1.40297.1.2.5.2.1.1.5 | INTEGER | read-write | The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. |
| INT digitalTxContactName | 1.3.6.1.4.1.40297.1.2.5.2.1.1.6 | INTEGER | read-write | The row number of transmitting contact name. none(0), row number(1~512). The value is limmited by the number of rows in contact table. |
| rptAnalogChannelSetting | 1.3.6.1.4.1.40297.1.2.5.3 | |||
| analogChnTable | 1.3.6.1.4.1.40297.1.2.5.3.1 | not-accessible | The table of analog channel's configuration parameters relevant to the repeater's analog channels. | |
| analogChnEntry | 1.3.6.1.4.1.40297.1.2.5.3.1.1 | not-accessible | The analog channel's configuration parameters for one of the repeater's analog channels. | |
| INT analogChnIndex | 1.3.6.1.4.1.40297.1.2.5.3.1.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the analog channel's parameters. It also represents the channel number which is counted from 1. |
| INT analogCarrierSquelchLevel | 1.3.6.1.4.1.40297.1.2.5.3.1.1.2 | INTEGER | read-write | The carrier squelch level. open(0), normal(1), tight(2) |
| INT analogMultiCtcCdc | 1.3.6.1.4.1.40297.1.2.5.3.1.1.3 | INTEGER | read-write | The multiCtcCdc control. disable(0), enable(1). It can't be set to enable until the analogRxCtcCdcType is not 0 and there is some valid data is multiCTCCDCTable. |
| INT analogPreEmp | 1.3.6.1.4.1.40297.1.2.5.3.1.1.4 | INTEGER | read-write | The pre-emphasis control. disable(0), enable(1). |
| INT analogScrambler | 1.3.6.1.4.1.40297.1.2.5.3.1.1.5 | INTEGER | read-write | The scrambler control. disable(0), enable(1). |
| INT analogFlatAudio | 1.3.6.1.4.1.40297.1.2.5.3.1.1.6 | INTEGER | read-write | The flat audio control. disable(0), enable(1). |
| INT analogReceiveFrequency | 1.3.6.1.4.1.40297.1.2.5.3.1.1.7 | INTEGER | read-write | The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. |
| INT analogRxCtcCdcType | 1.3.6.1.4.1.40297.1.2.5.3.1.1.8 | INTEGER | read-write | The type of receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). |
| INT analogRxCtcss | 1.3.6.1.4.1.40297.1.2.5.3.1.1.9 | INTEGER | read-write | The value of receiving CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType. |
| INT analogRxCdcss | 1.3.6.1.4.1.40297.1.2.5.3.1.1.10 | INTEGER | read-write | The value of receiving CDCSS. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType. |
| INT analogTransmitFrequency | 1.3.6.1.4.1.40297.1.2.5.3.1.1.11 | INTEGER | read-write | The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. |
| INT analogTxCtcCdcType | 1.3.6.1.4.1.40297.1.2.5.3.1.1.12 | INTEGER | read-write | The type of transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). |
| INT analogTxCtcss | 1.3.6.1.4.1.40297.1.2.5.3.1.1.13 | INTEGER | read-write | The value of transmitting CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is limited by analogTxCtcCdcType. |
| INT analogTxCdcss | 1.3.6.1.4.1.40297.1.2.5.3.1.1.14 | INTEGER | read-write | The value of transmitting CDCSS. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType. |
| rptMixedChannelSetting | 1.3.6.1.4.1.40297.1.2.5.4 | |||
| mixedChnTable | 1.3.6.1.4.1.40297.1.2.5.4.1 | not-accessible | The table of mixed channel's configuration parameters relevant to the repeater's mixed channels. | |
| mixedChnEntry | 1.3.6.1.4.1.40297.1.2.5.4.1.1 | not-accessible | The mixed channel's configuration parameters for one of the repeater's mixed channels. | |
| INT mixedChnIndex | 1.3.6.1.4.1.40297.1.2.5.4.1.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the mixed channel's parameters. It also represents the channel number which is counted from 1. |
| INT mixedCarrierSquelchLevel | 1.3.6.1.4.1.40297.1.2.5.4.1.1.2 | INTEGER | read-write | The carrier squelch level control. open(0), normal(1), tight(2). |
| INT mixedTxContactName | 1.3.6.1.4.1.40297.1.2.5.4.1.1.3 | INTEGER | read-write | The row number of transmitting contact name. none(0), row number(1~512). The value is limited to the numbers of row in the contact table. |
| INT mixedIpMultisiteConnect | 1.3.6.1.4.1.40297.1.2.5.4.1.1.4 | INTEGER | read-write | The multisite connecting based on network. none(0), slot1(1), slot 2(2), slot1&slot2(3). |
| INT mixedColorCode | 1.3.6.1.4.1.40297.1.2.5.4.1.1.5 | INTEGER | read-write | The color code. |
| INT mixedTxChannelType | 1.3.6.1.4.1.40297.1.2.5.4.1.1.6 | INTEGER | read-write | The type of transmitting channel. digital(0), analog(1). |
| INT mixedPreEmp | 1.3.6.1.4.1.40297.1.2.5.4.1.1.7 | INTEGER | read-write | The pre-emphasis control. disable(0), enable(1). |
| INT mixedScrambler | 1.3.6.1.4.1.40297.1.2.5.4.1.1.8 | INTEGER | read-write | The scrambler control. disable(0), enable(1). |
| INT mixedFlatAudio | 1.3.6.1.4.1.40297.1.2.5.4.1.1.9 | INTEGER | read-write | The flat audio control. disable(0), enable(1). |
| INT mixedMultiCtcCdc | 1.3.6.1.4.1.40297.1.2.5.4.1.1.10 | INTEGER | read-write | The multiCtcCdc control. disable(0), enable(1). It can't be set to enable until the mixedRxCtcCdcType is not 0 and there is some valid data in multiCTCCDC Table. |
| INT mixedReceiveFrequency | 1.3.6.1.4.1.40297.1.2.5.4.1.1.11 | INTEGER | read-write | The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. |
| INT mixedRxCtcCdcType | 1.3.6.1.4.1.40297.1.2.5.4.1.1.12 | INTEGER | read-write | The type of receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). |
| INT mixedRxCtcss | 1.3.6.1.4.1.40297.1.2.5.4.1.1.13 | INTEGER | read-write | The value of receiving CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType. |
| INT mixedRxCdcss | 1.3.6.1.4.1.40297.1.2.5.4.1.1.14 | INTEGER | read-write | The value of receiving CDCSS. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType. |
| INT mixedTransmitFrequency | 1.3.6.1.4.1.40297.1.2.5.4.1.1.15 | INTEGER | read-write | The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. |
| INT mixedTxCtcCdcType | 1.3.6.1.4.1.40297.1.2.5.4.1.1.16 | INTEGER | read-write | The type of transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). |
| INT mixedTxCtcss | 1.3.6.1.4.1.40297.1.2.5.4.1.1.17 | INTEGER | read-write | The value of transmitting CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType. |
| INT mixedTxCdcss | 1.3.6.1.4.1.40297.1.2.5.4.1.1.18 | INTEGER | read-write | The value of transmitting CDCSS. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType. |
| rptServiceSetting | 1.3.6.1.4.1.40297.1.2.5.5 | |||
| INT groupCallHangTime | 1.3.6.1.4.1.40297.1.2.5.5.1 | INTEGER | read-write | The group call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit. |
| INT privateCallHangTime | 1.3.6.1.4.1.40297.1.2.5.5.2 | INTEGER | read-write | The private call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit. |
| INT emergencyCallHangTime | 1.3.6.1.4.1.40297.1.2.5.5.3 | INTEGER | read-write | The emergency call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit. |
| INT sit | 1.3.6.1.4.1.40297.1.2.5.5.4 | INTEGER | read-write | The sit. unit: second. transmit always(0), the value of sit(2~120). The value is 2 times of the real value and should not be less than groupCallHangTime, privateCallHangTime and emergencyCallHangTime. |
| INT txPreambleDuration | 1.3.6.1.4.1.40297.1.2.5.5.5 | INTEGER | read-write | The preamble duration. unit: milisecond. The value is 1/60 times of the real value. |
| INT beaconTxMode | 1.3.6.1.4.1.40297.1.2.5.5.6 | INTEGER | read-write | The beacon transmit mode. local(0), network(1). |
| INT beaconDuration | 1.3.6.1.4.1.40297.1.2.5.5.7 | INTEGER | read-write | The beacon duration. unit: milisecond. disable(0), beacon duration(4~150). The value is 1/120 times of the real value |
| INT beaconInterval | 1.3.6.1.4.1.40297.1.2.5.5.8 | INTEGER | read-write | The beacon interval. unit: second. |
| INT multisiteAccessManagement | 1.3.6.1.4.1.40297.1.2.5.5.9 | INTEGER | read-write | The multisite access management control. disable(0), enable(1). |
| INT accessManagement | 1.3.6.1.4.1.40297.1.2.5.5.10 | INTEGER | read-write | The access management control. disable(0), enable(1). |
| multisiteAccessManageTable | 1.3.6.1.4.1.40297.1.2.5.5.11 | not-accessible | The table of multisite access management's parameters relevant to the multisite access management. | |
| multisiteAccessManageEntry | 1.3.6.1.4.1.40297.1.2.5.5.11.1 | not-accessible | The multisite management parameters. | |
| INT multisiteAccessManageIndex | 1.3.6.1.4.1.40297.1.2.5.5.11.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the multisite access management's parameters. |
| INT multisiteStartId | 1.3.6.1.4.1.40297.1.2.5.5.11.1.2 | INTEGER | read-write | The start ID. invalid record(0), start ID(1~16776415). It can't be set until multisiteAccessManagement is enable and the previous row is set. If it is set, the matched multisiteIdLength and multisiteAccessCallType will be set to 100 and 1 automaticly. |
| INT multisiteIdLength | 1.3.6.1.4.1.40297.1.2.5.5.11.1.3 | INTEGER | read-write | The ID length. invalid(65535), ID length(1~255). It can't be set until the multisiteAccessManagement is enable and the matched multisiteStartId is set. |
| INT multisiteAccessCallType | 1.3.6.1.4.1.40297.1.2.5.5.11.1.4 | INTEGER | read-write | The call type. private call(0), group call(1), invalid(65535). It can't be set until multisiteAccessManagement is enable. |
| contactTable | 1.3.6.1.4.1.40297.1.2.5.5.12 | not-accessible | The table of contacts. It is not allowed to add a new contact information. | |
| contactEntry | 1.3.6.1.4.1.40297.1.2.5.5.12.1 | not-accessible | The contact information. | |
| INT contactIndex | 1.3.6.1.4.1.40297.1.2.5.5.12.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the contact information. |
| OCT callAlias | 1.3.6.1.4.1.40297.1.2.5.5.12.1.2 | OCTET STRING | read-write | The call alias. It is an unicode string. The value should be exclusive. |
| INT contactCallType | 1.3.6.1.4.1.40297.1.2.5.5.12.1.3 | INTEGER | read-write | The call type. private call(0), group call(1), all call(2), invalid(65535). If the contactCallType is all call, the matched callId will be set to 16777215 automatically. The number of all call contact must be less than 2. |
| INT callId | 1.3.6.1.4.1.40297.1.2.5.5.12.1.4 | INTEGER | read-write | The call ID. invalid(0), call ID(1~16776415,16777215). The callId should be exclusive in the group of same call type. |
| accessManageTable | 1.3.6.1.4.1.40297.1.2.5.5.13 | not-accessible | The table of access management's parameters relevant to the access management. | |
| accessManageEntry | 1.3.6.1.4.1.40297.1.2.5.5.13.1 | not-accessible | The access management parameters. | |
| INT accessManageIndex | 1.3.6.1.4.1.40297.1.2.5.5.13.1.1 | INTEGER | read-only | The index of the table which uniquely identifies the access management's parameters. |
| INT startId | 1.3.6.1.4.1.40297.1.2.5.5.13.1.2 | INTEGER | read-write | The start ID. invalid record(0), start ID(1~16776415). It can't be set until accessManagement is enable and the previous row is set. If it is set, the matched idLength will be set to 100 automaticly. |
| INT idLength | 1.3.6.1.4.1.40297.1.2.5.5.13.1.3 | INTEGER | read-write | The ID length. invalid(65535), ID length(1~255). It can't be set until the accessManagement is enable and the matched startId is set. |
| INT repeatTOTTime | 1.3.6.1.4.1.40297.1.2.5.5.14 | INTEGER | read-only | The repeat TOT time. unit: second. The value is 1/5 times of the real value. |
| INT rerepeatTOTTime | 1.3.6.1.4.1.40297.1.2.5.5.15 | INTEGER | read-only | The rerepeat TOT time. unit: second. |
RFC description
Monitors and manages Hytera repeaters with real-time alarm info, configuration, and system parameters.
Start monitoring Hytera digital radio repeater with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.