HUAWEI-VOIP-SIP-MIB

All MIBs › HUAWEI-VOIP-SIP-MIB

Organization: Huawei Technologies Co., Ltd.

Last Updated: 2012-07-04

Category: Domain: Telephony/VoIP, Domain: VoIP/Telephony, Vendor: Huawei

Description: Huawei MIB for VoIP over SIP, covering SIP trunk configuration, proxy server addressing, and call quality statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-VOIP-SIP-MIB?

HUAWEI-VOIP-SIP-MIB is a Huawei-proprietary module for managing SIP trunk configuration and call statistics on Huawei VoIP gateways. It exposes SIP proxy/registrar server addresses, trunk group configuration, per-trunk registration state, and call statistics such as active call count and call-setup success/failure counts. Its central monitoring purpose is software/process status: whether a SIP trunk is currently registered with its proxy is effectively a service-availability indicator, and rising call-setup failure counts or degraded quality metrics point to problems with the trunk, the carrier, or codec negotiation. It instruments the standard SIP protocol (RFC 3261) with Huawei-specific management objects and is commonly used alongside HUAWEI-VO-GENERAL-MIB, which supplies shared voice parameters like codec and jitter-buffer settings. It is typically deployed on Huawei SIP-based VoIP gateways or softswitches connecting to carrier SIP trunks or an enterprise IP-PBX. Engineers can download the HUAWEI-VOIP-SIP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-VOIP-SIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei VoIP gateways and softswitches

Monitoring Examples

An admin would poll a SIP trunk table (an hwVoipSipTrunkTable/hwVoipSipTrunkEntry pattern) for each trunk's registration status and configured proxy/registrar address, alongside call statistics for active calls and failed call setups. A trunk that drops from registered to unregistered state signals a lost connection to the carrier's SIP proxy, interrupting outbound calling until it recovers. A rising failed-call-setup counter on an otherwise-registered trunk points to a codec mismatch or a capacity issue on the carrier side worth escalating.

What Can Be Monitored

SIP trunk registration status
active call count
call setup success/failure statistics
SIP proxy/registrar server configuration
call quality metrics

Imported Objects

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
private

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwVoip	1.3.6.1.4.1.2011.6.36			This mib is used for defining huawei's SIP MIB objects, which provides SIP management.
hwIASVoipObjects	1.3.6.1.4.1.2011.6.36.1
hwVoipSipObjects	1.3.6.1.4.1.2011.6.36.1.70
hwVGWConfigTable	1.3.6.1.4.1.2011.6.36.1.70.1		not-accessible	This table is used to config the parameters of SipVgw. The index of this table is hwSipVgwId.
hwVGWConfigEntry	1.3.6.1.4.1.2011.6.36.1.70.1.1		not-accessible	This table is used to config the parameters of SipVgw. The index of this entry is hwSipVgwId.
I32 hwSipVgwId	1.3.6.1.4.1.2011.6.36.1.70.1.1.1	Integer32	not-accessible	SIP GateWay ID.
IP hwSipVgwMediaIPAddress	1.3.6.1.4.1.2011.6.36.1.70.1.1.2	IpAddress	read-write	Indicates the MediaIPAddress of SipVgw.
IP hwSipVgwSigIPAddress	1.3.6.1.4.1.2011.6.36.1.70.1.1.3	IpAddress	read-write	Indicates the SigIPAddress of SipVgw.
I32 hwSipVgwSigPort	1.3.6.1.4.1.2011.6.36.1.70.1.1.4	Integer32	read-write	Indicates the SigPort of SipVgw. 65535 means this parameter is not configurated.
IP hwSipVgwProxyIPAddress	1.3.6.1.4.1.2011.6.36.1.70.1.1.5	IpAddress	read-write	Indicates the Master Proxy IP of SipVgw.
I32 hwSipVgwProxyPort	1.3.6.1.4.1.2011.6.36.1.70.1.1.6	Integer32	read-write	Indicates the Master ProxyPort of SipVgw.
INT hwSipVgwTransMode	1.3.6.1.4.1.2011.6.36.1.70.1.1.7	INTEGER	read-write	Indicates the TransMode of SipVgw. Options: 1. tcp(1) -TCP 2. udp(2) -UDP 3. sctp(3) -SCTP 4. tls(4) -TLS
OCT hwSipVgwDomainName	1.3.6.1.4.1.2011.6.36.1.70.1.1.8	OCTET STRING	read-write	Indicates the DomainName of SipVgw.
OCT hwSipVgwProxyDomainName	1.3.6.1.4.1.2011.6.36.1.70.1.1.9	OCTET STRING	read-write	Indicates the ProxyDomainName of SipVgw.
OCT hwSipVgwHomeDomainName	1.3.6.1.4.1.2011.6.36.1.70.1.1.10	OCTET STRING	read-write	Indicates the HomeDomainName of SipVgw.
OCT hwSipVgwRegisterURI	1.3.6.1.4.1.2011.6.36.1.70.1.1.11	OCTET STRING	read-write	Indicates the Register-URI of SipVgw.
OCT hwSipVgwConferenceFactoryURI	1.3.6.1.4.1.2011.6.36.1.70.1.1.12	OCTET STRING	read-write	Indicates the ConferenceFactory-URI of SipVgw.
OCT hwSipVgwDesc	1.3.6.1.4.1.2011.6.36.1.70.1.1.13	OCTET STRING	read-write	Indicates the Description of SipVgw.
OCT hwSipVgwPhoneContext	1.3.6.1.4.1.2011.6.36.1.70.1.1.14	OCTET STRING	read-write	Indicates the PhoneContext of SipVgw.
INT hwSipVgwAdminStatus	1.3.6.1.4.1.2011.6.36.1.70.1.1.15	INTEGER	read-write	Indicates the AdminStatus of SipVgw. Options: 1. reset(1) -reset 2. switchover(2) -switchover
ROW hwSipVgwRowStatus	1.3.6.1.4.1.2011.6.36.1.70.1.1.16	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and delete existing rows.
I32 hwSipVgwProfileIndex	1.3.6.1.4.1.2011.6.36.1.70.1.1.17	Integer32	read-write	Indicates the ProfileIndex of SipVgw.
OCT hwSipVgwProfileName	1.3.6.1.4.1.2011.6.36.1.70.1.1.18	OCTET STRING	read-only	Indicates the ProfileName of SipVgw.
IP hwSipVgwProxyIPAddress2	1.3.6.1.4.1.2011.6.36.1.70.1.1.19	IpAddress	read-write	Indicates the Slaver ProxyIPAddress of SipVgw.
I32 hwSipVgwProxyPort2	1.3.6.1.4.1.2011.6.36.1.70.1.1.20	Integer32	read-write	Indicates the Slaver ProxyPort of SipVgw.
OCT hwSipVgwAuthUserName	1.3.6.1.4.1.2011.6.36.1.70.1.1.21	OCTET STRING	read-write	Indicates the Auth Username of SipVgw.
OCT hwSipVgwAuthPassword	1.3.6.1.4.1.2011.6.36.1.70.1.1.22	OCTET STRING	read-write	Indicates the Auth Password of SipVgw.
I32 hwSipVgwMediaIPAddrDhcpClientIndex	1.3.6.1.4.1.2011.6.36.1.70.1.1.23	Integer32	read-write	Dhcp Media vlan id. The valid value is 1..4093, if the value is -1, the static media ip will be used.
I32 hwSipVgwSigIPAddrDhcpClientIndex	1.3.6.1.4.1.2011.6.36.1.70.1.1.24	Integer32	read-write	Dhcp Signal vlan id. The valid value is 1..4093, if the value is -1, the static signal ip will be used.
OCT hwSipVgwSrvLogicName	1.3.6.1.4.1.2011.6.36.1.70.1.1.25	OCTET STRING	read-write	Indicates the ServeLogicName of SipVgw.
INT hwSipVgwServerDhcpOption	1.3.6.1.4.1.2011.6.36.1.70.1.1.26	INTEGER	read-write	Indicates the DHCP option of SipVgw. Options: 1. none(1) -none 2. option120(2) -option120 3. option21(3) -option21
INT hwSipVgwSwitchoverDestination	1.3.6.1.4.1.2011.6.36.1.70.1.1.27	INTEGER	read-write	Indicates the target proxy of switchover. Options: 1. primary(1) -primary proxy 2. secondary(2) -secondary proxy
OCT hwSipVgwMediaAddrName	1.3.6.1.4.1.2011.6.36.1.70.1.1.28	OCTET STRING	read-write	Dynamic media IP name.
OCT hwSipVgwSignalAddrName	1.3.6.1.4.1.2011.6.36.1.70.1.1.29	OCTET STRING	read-write	Dynamic signal IP name.
INT hwSipVgwAuthPasswordMode	1.3.6.1.4.1.2011.6.36.1.70.1.1.30	INTEGER	read-write	Auth Password mode. Options: 1. password(1) -auth by password 2. ha1(2) -auth by ha1
OCT hwSipVgwAuthHA1	1.3.6.1.4.1.2011.6.36.1.70.1.1.31	OCTET STRING	read-write	Indicates the Auth HA1 of SipVgw.
INT hwSipVgwAuthMode	1.3.6.1.4.1.2011.6.36.1.70.1.1.32	INTEGER	read-write	Indicates the user authentication mode of SipVgw. Options: 1. interface(1) -interface 2. singleuser(2) -single user
INT hwSipVgwSubUAProfile	1.3.6.1.4.1.2011.6.36.1.70.1.1.33	INTEGER	read-write	Indicates subscribe to UA-Profile. Options: 1. enable(1) -enable 2. disable(2) -disable
INT hwSipVgwSubRegState	1.3.6.1.4.1.2011.6.36.1.70.1.1.34	INTEGER	read-write	Indicates subscribe to REG-STATE. Options: 1. enable(1) -enable 2. disable(2) -disable
INT hwSipVgwSubMwi	1.3.6.1.4.1.2011.6.36.1.70.1.1.35	INTEGER	read-write	Indicates subscribe to MWI. Options: 1. enable(1) -enable 2. disable(2) -disable
INT hwSipVgwSdpNegoMode	1.3.6.1.4.1.2011.6.36.1.70.1.1.36	INTEGER	read-write	Indicates SDP negotiation mode. Options: 1. local(1) -Local end takes priority when codec negotiation 2. remote(2) -Remote end takes priority when codec negotiation
INT hwSipVgwProxyDualHome	1.3.6.1.4.1.2011.6.36.1.70.1.1.37	INTEGER	read-write	Indicate mode of supporting proxy homing. Options: 1. no(1) -not support proxy multi-homing 2. dualhome(2) -support proxy dual-homing, but does not support auto-switchover 3. autoswitchover(3) -support proxy dual-homing and auto-switchover 4. loadsharing(4) -support proxy load sharing
INT hwSipVgwProxyCheckMode	1.3.6.1.4.1.2011.6.36.1.70.1.1.38	INTEGER	read-write	Indicate proxy detection mode. Options: 1. option(1) -detect proxy by option message 2. probe(2) -detect proxy by probe mode 3. register(3) -detect proxy by register message
INT hwSipVgwProxyRefreshMode	1.3.6.1.4.1.2011.6.36.1.70.1.1.39	INTEGER	read-write	Indicate Proxy address refresh mode. Options: 1. immediate(1) -immediate switch 2. defer(2) -switch in no calls cases 3. no-switch(3) -no switch 4. null(-1) -invalid value When the proxy homing mode is load sharing, parameters defer(2) and no-switch(3) do not take effect.
INT hwSipVgwKeepActiveFlag	1.3.6.1.4.1.2011.6.36.1.70.1.1.40	INTEGER	read-write	The switch for transfer connect regular renovate. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
I32 hwSipVgwKeepActivePeriod	1.3.6.1.4.1.2011.6.36.1.70.1.1.41	Integer32	read-write	Indicates the configured period of transfer connect regular renovate. Unit: second Default:30
INT hwSipVgwRegMode	1.3.6.1.4.1.2011.6.36.1.70.1.1.42	INTEGER	read-write	The register mode of the sip user and account. Options: 1. single(1) -single 2. wildcard(2) -wildcard Default: single(1)
hwVGWRunningTable	1.3.6.1.4.1.2011.6.36.1.70.2		not-accessible	This table is used to query the running parameters of SipVgw. The index of this table is hwSipVgwRunningTblVgwId.
hwVGWRunningEntry	1.3.6.1.4.1.2011.6.36.1.70.2.1		not-accessible	This table is used to query the running parameters of SipVgw. The index of this entry is hwSipVgwRunningTblVgwId.
I32 hwSipVgwRunningTblVgwId	1.3.6.1.4.1.2011.6.36.1.70.2.1.1	Integer32	not-accessible	SIP GateWay ID.
IP hwSipVgwRunningMediaIPAddress	1.3.6.1.4.1.2011.6.36.1.70.2.1.2	IpAddress	read-only	Indicates the MediaIPAddress of SipVgw.
IP hwSipVgwRunningSigIPAddress	1.3.6.1.4.1.2011.6.36.1.70.2.1.3	IpAddress	read-only	Indicates the SigIPAddress of SipVgw.
I32 hwSipVgwRunningSigPort	1.3.6.1.4.1.2011.6.36.1.70.2.1.4	Integer32	read-only	Indicates the SigPort of SipVgw. 65535 means the interface is not started.
IP hwSipVgwRunningProxyIPAddress	1.3.6.1.4.1.2011.6.36.1.70.2.1.5	IpAddress	read-only	Indicates the Master Proxy IP of SipVgw.
I32 hwSipVgwRunningProxyPort	1.3.6.1.4.1.2011.6.36.1.70.2.1.6	Integer32	read-only	Indicates the Master ProxyPort of SipVgw.
INT hwSipVgwRunningTransMode	1.3.6.1.4.1.2011.6.36.1.70.2.1.7	INTEGER	read-only	Indicates the TransMode of SipVgw. null(255) means the interface is not started. Options: 1. tcp(1) -TCP 2. udp(2) -UDP 3. sctp(3) -SCTP 4. tls(4) -TLS 5. null(255) -interface is not started
OCT hwSipVgwRunningDomainName	1.3.6.1.4.1.2011.6.36.1.70.2.1.8	OCTET STRING	read-only	Indicates the DomainName of SipVgw.
OCT hwSipVgwRunningProxyDomainName	1.3.6.1.4.1.2011.6.36.1.70.2.1.9	OCTET STRING	read-only	Indicates the ProxyDomainName of SipVgw.
OCT hwSipVgwRunningHomeDomainName	1.3.6.1.4.1.2011.6.36.1.70.2.1.10	OCTET STRING	read-only	Indicates the HomeDomainName of SipVgw.
OCT hwSipVgwRunningRegisterURI	1.3.6.1.4.1.2011.6.36.1.70.2.1.11	OCTET STRING	read-only	Indicates the Register-URI of SipVgw.
OCT hwSipVgwRunningConferenceFactoryURI	1.3.6.1.4.1.2011.6.36.1.70.2.1.12	OCTET STRING	read-only	Indicates the ConferenceFactory-URI of SipVgw.
OCT hwSipVgwRunningDesc	1.3.6.1.4.1.2011.6.36.1.70.2.1.13	OCTET STRING	read-only	Indicates the Description of SipVgw.
OCT hwSipVgwRunningPhoneContext	1.3.6.1.4.1.2011.6.36.1.70.2.1.14	OCTET STRING	read-only	Indicates the PhoneContext of SipVgw.
I32 hwSipVgwRunningProfileIndex	1.3.6.1.4.1.2011.6.36.1.70.2.1.15	Integer32	read-only	Indicates the ProfileIndex of SipVgw.
OCT hwSipVgwRunningProfileName	1.3.6.1.4.1.2011.6.36.1.70.2.1.16	OCTET STRING	read-only	Indicates the ProfileName of SipVgw.
IP hwSipVgwRunningProxyIPAddress2	1.3.6.1.4.1.2011.6.36.1.70.2.1.17	IpAddress	read-only	Indicates the Slaver ProxyIPAddress of SipVgw.
I32 hwSipVgwRunningProxyPort2	1.3.6.1.4.1.2011.6.36.1.70.2.1.18	Integer32	read-only	Indicates the Slaver ProxyPort of SipVgw.
INT hwSipVgwProxy1OperStatus	1.3.6.1.4.1.2011.6.36.1.70.2.1.19	INTEGER	read-only	Indicates the Master OperStatus of SipVgw. Options: 1. up(1) -normal 2. down(2) -fault 3. unknown(3) -unknown
INT hwSipVgwProxy2OperStatus	1.3.6.1.4.1.2011.6.36.1.70.2.1.20	INTEGER	read-only	Indicates the Slaver OperStatus of SipVgw. Options: 1. up(1) -normal 2. down(2) -fault 3. unknown(3) -unknown
OCT hwSipVgwRunningAuthUserName	1.3.6.1.4.1.2011.6.36.1.70.2.1.21	OCTET STRING	read-only	Indicates the Auth Username of SipVgw.
OCT hwSipVgwRunningAuthPassword	1.3.6.1.4.1.2011.6.36.1.70.2.1.22	OCTET STRING	read-only	Indicates the Auth Password of SipVgw.
OCT hwSipVgwRunningSrvLogicName	1.3.6.1.4.1.2011.6.36.1.70.2.1.23	OCTET STRING	read-only	Indicates the ServeLogicName of SipVgw.
INT hwSipVgwRunningServerDhcpOption	1.3.6.1.4.1.2011.6.36.1.70.2.1.24	INTEGER	read-only	Indicates the DHCP option of SipVgw. Options: 1. none(1) -none 2. option120(2) -option120 3. option21(3) -option21 Default: none(1)
OCT hwSipVgwRunningMediaAddrName	1.3.6.1.4.1.2011.6.36.1.70.2.1.25	OCTET STRING	read-only	Indicates the current dynamic media IP name of SipVgw.
OCT hwSipVgwRunningSignalAddrName	1.3.6.1.4.1.2011.6.36.1.70.2.1.26	OCTET STRING	read-only	Indicates the current dynamic signal IP name of SipVgw.
INT hwSipVgwRunningAuthPasswordMode	1.3.6.1.4.1.2011.6.36.1.70.2.1.27	INTEGER	read-only	Auth Password mode. Options: 1. password(1) -password 2. ha1(2) -HA1
OCT hwSipVgwRunningAuthHA1	1.3.6.1.4.1.2011.6.36.1.70.2.1.28	OCTET STRING	read-only	Auth HA1.
INT hwSipVgwRunningAuthMode	1.3.6.1.4.1.2011.6.36.1.70.2.1.29	INTEGER	read-only	Indicates user authentication mode of SipVgw. Options: 1. interface(1) -interface 2. singleuser(2) -single user
INT hwSipVgwRunningSubUAProfile	1.3.6.1.4.1.2011.6.36.1.70.2.1.30	INTEGER	read-only	Indicates subscribe to UA-Profile. Options: 1. enable(1) -enable 2. disable(2) -disable
INT hwSipVgwRunningSubRegState	1.3.6.1.4.1.2011.6.36.1.70.2.1.31	INTEGER	read-only	Indicates subscribe to REG-STATE. Options: 1. enable(1) -enable 2. disable(2) -disable
INT hwSipVgwRunningSubMwi	1.3.6.1.4.1.2011.6.36.1.70.2.1.32	INTEGER	read-only	Indicates subscribe to MWI. Options: 1. enable(1) -enable 2. disable(2) -disable
INT hwSipVgwRunningSdpNegoMode	1.3.6.1.4.1.2011.6.36.1.70.2.1.33	INTEGER	read-only	Indicates SDP negotiation mode of SipVgw. Options: 1. local(1) -local first 2. remote(2) -remote first
INT hwSipVgwRunningProxyDualHome	1.3.6.1.4.1.2011.6.36.1.70.2.1.34	INTEGER	read-only	Indicate mode of supporting proxy homing of SipVgw. Options: 1. no(1) -not support proxy multi-homing 2. dualhome(2) -support proxy dual-homing, but does not support auto-switchover 3. autoswitchover(3) -support proxy dual-homing and auto-switchover 4. loadsharing(4) -support proxy load sharing
INT hwSipVgwRunningProxyCheckMode	1.3.6.1.4.1.2011.6.36.1.70.2.1.35	INTEGER	read-only	Indicate proxy detection mode. Options: 1. option(1) -detection proxy by option message 2. probe(2) -detection proxy by probe mode 3. register(3) -detection proxy by register message
INT hwSipVgwRunningProxyRefreshMode	1.3.6.1.4.1.2011.6.36.1.70.2.1.36	INTEGER	read-only	Indicate Proxy address refresh mode. Options: 1. immediate(1) -immediate switch 2. defer(2) -switch in no calls cases 3. no-switch(3) -no switch When the proxy homing mode is load sharing, parameters defer(2) and no-switch(3) do not take effect.
INT hwSipVgwRunningCurrentProxy	1.3.6.1.4.1.2011.6.36.1.70.2.1.37	INTEGER	read-only	Indicate Current Proxy. Options: 1. primary-proxy(1) -primary proxy 2. secondary-proxy(2) -secondary proxy 3. null(-1) -invalid value
INT hwSipVgwRunningKeepActiveFlag	1.3.6.1.4.1.2011.6.36.1.70.2.1.38	INTEGER	read-only	Indicates the switch for transfer connect regular renovate. Options: 1. enable(1) -enable 2. disable(2) -disable
I32 hwSipVgwRunningKeepActivePeriod	1.3.6.1.4.1.2011.6.36.1.70.2.1.39	Integer32	read-only	Indicates the configured period of transfer connect regular renovate. Unit: second
INT hwSipVgwRunningRegMode	1.3.6.1.4.1.2011.6.36.1.70.2.1.40	INTEGER	read-only	Indicates register mode of sip user and account. Options: 1. single(1) -single 2. wildcard(2) -wildcard
hwSipstackParametersTable	1.3.6.1.4.1.2011.6.36.1.70.3
OCT hwSipstackParaServer	1.3.6.1.4.1.2011.6.36.1.70.3.1	OCTET STRING	read-write	The head-field of Server.
OCT hwSipstackParaOrganization	1.3.6.1.4.1.2011.6.36.1.70.3.2	OCTET STRING	read-write	The head-field of Organization.
OCT hwSipstackParaUserAgent	1.3.6.1.4.1.2011.6.36.1.70.3.3	OCTET STRING	read-write	The head-field of UserAgent.
I32 hwSipstackParaMaxForwards	1.3.6.1.4.1.2011.6.36.1.70.3.4	Integer32	read-write	The MaxForwards parameter of SipStack. Default: 70
I32 hwSipstackParaT1	1.3.6.1.4.1.2011.6.36.1.70.3.5	Integer32	read-write	The T1 timer(Round-Trip timer) of SipStack. Default: 500 Unit: ms
I32 hwSipstackParaT2	1.3.6.1.4.1.2011.6.36.1.70.3.6	Integer32	read-write	The T2 timer of SipStack(The maximum length of retransmission for non-invite request or invite response). Default: 4000 Unit: millisecond
I32 hwSipstackParaT4	1.3.6.1.4.1.2011.6.36.1.70.3.7	Integer32	read-write	The T4 timer of SipStack(The maximum length of message transmission in the network). Default: 5000 Unit: millisecond
I32 hwSipstackParaTD	1.3.6.1.4.1.2011.6.36.1.70.3.8	Integer32	read-write	The D timer of SipStack(The maximum length of message retransmission for getting a response). Default: 32000 Unit: millisecond
I32 hwSipstackParaMinSE	1.3.6.1.4.1.2011.6.36.1.70.3.9	Integer32	read-write	The timer for Minimum of Session-Expires. Default: 90 Unit: second
I32 hwSipstackParaSessionProgress	1.3.6.1.4.1.2011.6.36.1.70.3.10	Integer32	read-write	The length of retransmission for SessionProgress. Default: 180 Unit: second
I32 hwSipstackParaSessionRelProgress	1.3.6.1.4.1.2011.6.36.1.70.3.11	Integer32	read-write	The length of retransmission for SessionRelProgress. Default: 60 Unit: second
INT hwSipstackParaEntityBasedSessionsTimerFlag	1.3.6.1.4.1.2011.6.36.1.70.3.12	INTEGER	read-write	This flag indicates that whether the Sessions Timer based on UA-Entity. Options: 1. yes(1) -Sessions Timer based on UA-Entity 2. no(2) -Sessions Timer not based on UA-Entity Default: no(2)
INT hwSipstackParaHeaderFoldFlag	1.3.6.1.4.1.2011.6.36.1.70.3.13	INTEGER	read-write	The flag indicates that whether the authentication header field is folded. Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1)
INT hwSipstackParaToHeaderStrictCheckFlag	1.3.6.1.4.1.2011.6.36.1.70.3.14	INTEGER	read-write	The flag indicates that whether the to header field is strictly checked. Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1)
hwSipProfileSupportTable	1.3.6.1.4.1.2011.6.36.1.70.4		not-accessible	This table is used to config the Sip Profile. The index of this table is hwSipProfileIndex.
hwSipProfileSupportEntry	1.3.6.1.4.1.2011.6.36.1.70.4.1		not-accessible	This table is used to config the Sip Profile. The index of this entry is hwSipProfileIndex.
I32 hwSipProfileIndex	1.3.6.1.4.1.2011.6.36.1.70.4.1.1	Integer32	not-accessible	Indicates the index of SipProfile.
OCT hwSipProfileName	1.3.6.1.4.1.2011.6.36.1.70.4.1.2	OCTET STRING	read-only	Indicates the Name of SipProfile.
hwVGWProxyConfigTable	1.3.6.1.4.1.2011.6.36.1.70.5		not-accessible	This table is used to config the parameters of SipVgw. The indexes of this table are hwSipVgwConfigId, hwSipVgwConfigProxyIndex.
hwVGWProxyConfigEntry	1.3.6.1.4.1.2011.6.36.1.70.5.1		not-accessible	This table is used to config the parameters of SipVgw. The indexes of this entry are hwSipVgwConfigId, hwSipVgwConfigProxyIndex.
I32 hwSipVgwConfigId	1.3.6.1.4.1.2011.6.36.1.70.5.1.1	Integer32	not-accessible	SIP GateWay ID.
I32 hwSipVgwConfigProxyIndex	1.3.6.1.4.1.2011.6.36.1.70.5.1.2	Integer32	not-accessible	proxy index. 0 -main 1 -standby
IP hwSipVgwConfigProxyIPAddress1	1.3.6.1.4.1.2011.6.36.1.70.5.1.3	IpAddress	read-write	Indicates the first ProxyIPAddress of SipVgw.
IP hwSipVgwConfigProxyIPAddress2	1.3.6.1.4.1.2011.6.36.1.70.5.1.4	IpAddress	read-write	Indicates the second ProxyIPAddress of SipVgw.
I32 hwSipVgwConfigProxyPort	1.3.6.1.4.1.2011.6.36.1.70.5.1.5	Integer32	read-write	Indicates the ProxyPort of SipVgw.
OCT hwSipVgwConfigProxyDomainName	1.3.6.1.4.1.2011.6.36.1.70.5.1.6	OCTET STRING	read-write	Indicates the ProxyDomainName of SipVgw.
I32 hwSipVgwConfigProxyAddressMode	1.3.6.1.4.1.2011.6.36.1.70.5.1.7	Integer32	read-write	The proxy address mode. 1 -IP 2 -DNS-A 3 -DNS-SRV 4 -DNS-NAPTR 5 -DNS-SRV-FIRST
hwVGWProxyRunningTable	1.3.6.1.4.1.2011.6.36.1.70.6		not-accessible	This table is used to query the config parameters of SipVgw. The indexes of this table are hwSipVgwRunningId, hwSipVgwProxyRunningIndex.
hwVGWProxyRunningEntry	1.3.6.1.4.1.2011.6.36.1.70.6.1		not-accessible	This table is used to query the config parameters of SipVgw. The indexes of this entry are hwSipVgwRunningId, hwSipVgwProxyRunningIndex.
I32 hwSipVgwRunningId	1.3.6.1.4.1.2011.6.36.1.70.6.1.1	Integer32	not-accessible	SIP GateWay ID.
I32 hwSipVgwProxyRunningIndex	1.3.6.1.4.1.2011.6.36.1.70.6.1.2	Integer32	not-accessible	Proxy index. 0 -main 1 -standby
IP hwSipVgwProxyRunningIPAddress1	1.3.6.1.4.1.2011.6.36.1.70.6.1.3	IpAddress	read-only	Indicates the primary IP address of proxy.
IP hwSipVgwProxyRunningIPAddress2	1.3.6.1.4.1.2011.6.36.1.70.6.1.4	IpAddress	read-only	Indicates the secondary IP address of proxy.
I32 hwSipVgwProxyRunningPort	1.3.6.1.4.1.2011.6.36.1.70.6.1.5	Integer32	read-only	Indicates the ProxyPort of SipVgw.
OCT hwSipVgwProxyRunningDomainName	1.3.6.1.4.1.2011.6.36.1.70.6.1.6	OCTET STRING	read-only	Indicates the ProxyDomainName of SipVgw.
I32 hwSipVgwProxyRunningAddressMode	1.3.6.1.4.1.2011.6.36.1.70.6.1.7	Integer32	read-only	The proxy address mode. 1 -IP 2 -DNS-A 3 -DNS-SRV 4 -DNS-NAPTR 5 -DNS-SRV-FIRST
I32 hwSipVgwProxyRunningState	1.3.6.1.4.1.2011.6.36.1.70.6.1.8	Integer32	read-only	The proxy state. 1 -up(1) 2 -down(2) 3 -unknown(3) 4 -the interface is not started(-1)
hwSipSrvLogicSupportTable	1.3.6.1.4.1.2011.6.36.1.70.7		not-accessible	This table is used to config the Sip Serve-Logic list. The index of this table is hwSipSrvLogicIndex.
hwSipSrvLogicSupportEntry	1.3.6.1.4.1.2011.6.36.1.70.7.1		not-accessible	This table is used to config the Sip Serve-Logic list. The index of this entry is hwSipSrvLogicIndex.
I32 hwSipSrvLogicIndex	1.3.6.1.4.1.2011.6.36.1.70.7.1.1	Integer32	not-accessible	Indicates the index of SipServeLogic.
OCT hwSipSrvLogicName	1.3.6.1.4.1.2011.6.36.1.70.7.1.2	OCTET STRING	read-only	Indicates the Name of SipServeLogic
hwSipMgSoftParameterTable	1.3.6.1.4.1.2011.6.36.1.70.8		not-accessible	This table is used to config the soft Parameters of SIP interface. The index of this table is hwSipMgInterfaceIndex.
hwSipMgSoftParameterEntry	1.3.6.1.4.1.2011.6.36.1.70.8.1		not-accessible	This table is used to config the soft Parameters of SIP interface. The index of this entry is hwSipMgInterfaceIndex.
I32 hwSipMgInterfaceIndex	1.3.6.1.4.1.2011.6.36.1.70.8.1.1	Integer32	not-accessible	SIP GateWay ID.
INT hwSipMgSoftParameter0	1.3.6.1.4.1.2011.6.36.1.70.8.1.2	INTEGER	read-write	The SIP MgSoftParameter0. Local Block Tone Type. Options: 1. busy(1) -busy tone 2. congestion(2) -congestion tone 3. mute(3) -mute 4. userdefine1(4) -user define 1 5. userdefine2 (5) -user define 2 Default: busy(1)
INT hwSipMgSoftParameter1	1.3.6.1.4.1.2011.6.36.1.70.8.1.3	INTEGER	read-write	the SIP MgSoftParameter1. Remote Block Tone Type. Options: 1. busy(1) -busy tone 2. congestion(2) -congestion tone 3. mute(3) -mute 4. userdefine1(4) -user define 1 5. userdefine2 (5) -user define 2 Default: busy(1)
INT hwSipMgSoftParameter2	1.3.6.1.4.1.2011.6.36.1.70.8.1.4	INTEGER	read-write	the SIP stand-alone flag Options: 1. enable(1) -support stand-alone 2. disable(2) -not support stand-alone Default: disable(2)
INT hwSipMgSoftParameter3	1.3.6.1.4.1.2011.6.36.1.70.8.1.5	INTEGER	read-write	the right of call control in normal call Options: 1. noControl(1) -none control 2. callerControl(2) -caller control 3. calleeControl(3) -callee control Default: noControl(1)
INT hwSipMgSoftParameter4	1.3.6.1.4.1.2011.6.36.1.70.8.1.6	INTEGER	read-write	the right of call control in emergency call Options: 1. noControl(1) -none control 2. callerControl(2) -caller control 3. calleeControl(3) -callee control 4. emergencyCallCenterControl(4) -Controlled by the emergency call control center Default: noControl(1)
INT hwSipMgSoftParameter5	1.3.6.1.4.1.2011.6.36.1.70.8.1.7	INTEGER	read-write	The flag of silence suppression in emergency call. Options: 1. close(1) -force close silence suppression when the call is emergency call 2. noControl(2) -the silence suppression is not controlled by the emergency call type Default: noControl(2)
INT hwSipMgSoftParameter6	1.3.6.1.4.1.2011.6.36.1.70.8.1.8	INTEGER	read-write	Whether to permit emergency calls when the port is remotely blocked. Options: 1. enable(1) -permit 2. disable(2) -not permit Default: disable(2)
INT hwSipMgSoftParameter7	1.3.6.1.4.1.2011.6.36.1.70.8.1.9	INTEGER	read-write	The SIP MgSoftParameter7. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter8	1.3.6.1.4.1.2011.6.36.1.70.8.1.10	INTEGER	read-write	Enables the user options heartbeat message Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1)
INT hwSipMgSoftParameter9	1.3.6.1.4.1.2011.6.36.1.70.8.1.11	INTEGER	read-write	The SIP MgSoftParameter9. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter10	1.3.6.1.4.1.2011.6.36.1.70.8.1.12	INTEGER	read-write	The SIP MgSoftParameter10. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter11	1.3.6.1.4.1.2011.6.36.1.70.8.1.13	INTEGER	read-write	The SIP MgSoftParameter11. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter12	1.3.6.1.4.1.2011.6.36.1.70.8.1.14	INTEGER	read-write	The SIP MgSoftParameter12. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter13	1.3.6.1.4.1.2011.6.36.1.70.8.1.15	INTEGER	read-write	The SIP MgSoftParameter13. Digitmap matching mode. Options: 1. min(1) -shortest 2. max(2) -longest Default: min(1)
INT hwSipMgSoftParameter14	1.3.6.1.4.1.2011.6.36.1.70.8.1.16	INTEGER	read-write	The SIP MgSoftParameter14. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter15	1.3.6.1.4.1.2011.6.36.1.70.8.1.17	INTEGER	read-write	The SIP MgSoftParameter15, RTP filter switch. Options: 1. nofilter(1) -No Filter 2. filter(2) -Filter Default: nofilter(1)
INT hwSipMgSoftParameter16	1.3.6.1.4.1.2011.6.36.1.70.8.1.18	INTEGER	read-write	The SIP MgSoftParameter16. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter17	1.3.6.1.4.1.2011.6.36.1.70.8.1.19	INTEGER	read-write	The SIP MgSoftParameter17. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter18	1.3.6.1.4.1.2011.6.36.1.70.8.1.20	INTEGER	read-write	The SIP MgSoftParameter18. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter19	1.3.6.1.4.1.2011.6.36.1.70.8.1.21	INTEGER	read-write	The SIP MgSoftParameter19. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter20	1.3.6.1.4.1.2011.6.36.1.70.8.1.22	INTEGER	read-write	The SIP MgSoftParameter20. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter21	1.3.6.1.4.1.2011.6.36.1.70.8.1.23	INTEGER	read-write	The SIP MgSoftParameter21. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
INT hwSipMgSoftParameter22	1.3.6.1.4.1.2011.6.36.1.70.8.1.24	INTEGER	read-write	The SIP MgSoftParameter22. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
I32 hwSipMgSoftParameter23	1.3.6.1.4.1.2011.6.36.1.70.8.1.25	Integer32	read-write	The SIP MgSoftParameter23. Life time carried in the registration message. Default: 600
INT hwSipMgSoftParameter24	1.3.6.1.4.1.2011.6.36.1.70.8.1.26	INTEGER	read-write	The SIP MgSoftParameter24. QoS start rtcp static. Options: 1. timode(1) -TI mode 2. nonsupport(2) -not support Default: nonsupport(2)
INT hwSipMgSoftParameter25	1.3.6.1.4.1.2011.6.36.1.70.8.1.27	INTEGER	read-write	The SIP MgSoftParameter25. Function of switching pulse signals and flash-hook events to DTMF signals. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
I32 hwSipMgSoftParameter26	1.3.6.1.4.1.2011.6.36.1.70.8.1.28	Integer32	read-write	The SIP MgSoftParameter26. Retry register interval. Default: 30 Unit: second
I32 hwSipMgSoftParameter27	1.3.6.1.4.1.2011.6.36.1.70.8.1.29	Integer32	read-write	The SIP MgSoftParameter27. Length of defer hotline timer. Default: 5 Unit: second
INT hwSipMgSoftParameter28	1.3.6.1.4.1.2011.6.36.1.70.8.1.30	INTEGER	read-write	The SIP MgSoftParameter28. Three-party audio mixing. Options: 1. local(1) -local audio mixing 2. network(2) -network audio mixing Default: local(1)
I32 hwSipMgSoftParameter29	1.3.6.1.4.1.2011.6.36.1.70.8.1.31	Integer32	read-write	Service rights are set based on VAG interface. Each service is represented with one bit(0: users have no service right; 1: users have a service right). There are four bits in use, leaving other bits reserved, and the represented services are subAddress, UUS, CUG, and CDIV from low bits to high bits. Default: 65535
hwSipDmmParaTable	1.3.6.1.4.1.2011.6.36.1.70.9		not-accessible	This table is used to config the digitmap. The index of this table is hwSipDmmParaMgId.
hwSipDmmParaEntry	1.3.6.1.4.1.2011.6.36.1.70.9.1		not-accessible	This table is used to config the digitmap. The index of this entry is hwSipDmmParaMgId.
U32 hwSipDmmParaMgId	1.3.6.1.4.1.2011.6.36.1.70.9.1.1	Unsigned32	not-accessible	Indicates the MG ID.
U32 hwSipDmmParaStartTimer	1.3.6.1.4.1.2011.6.36.1.70.9.1.2	Unsigned32	read-write	Indicates the length of the DMM start timer. Default: 20 Unit: second
U32 hwSipDmmParaShortTimer	1.3.6.1.4.1.2011.6.36.1.70.9.1.3	Unsigned32	read-write	Indicates the length of the DMM short timer. Default: 4 Unit: second
U32 hwSipDmmParaLongTimer	1.3.6.1.4.1.2011.6.36.1.70.9.1.4	Unsigned32	read-write	Indicates the length of the DMM long timer. Default: 20 Unit: second
hwVoiceUserGroupConfigTable	1.3.6.1.4.1.2011.6.36.1.70.10		not-accessible	This table is used to config the parameters of sip user group. The indexes of this table are hwSipUserGroupVgwId, hwSipUserGroupid.
hwVoiceUserGroupConfigEntry	1.3.6.1.4.1.2011.6.36.1.70.10.1		not-accessible	This table is used to config the parameters of sip user group. The indexes of this entry are hwSipUserGroupVgwId, hwSipUserGroupid.
I32 hwSipUserGroupVgwId	1.3.6.1.4.1.2011.6.36.1.70.10.1.1	Integer32	not-accessible	SIP GateWay ID.
I32 hwSipUserGroupid	1.3.6.1.4.1.2011.6.36.1.70.10.1.2	Integer32	not-accessible	User Group ID.
INT hwSipUserGroupRegisterUriMode	1.3.6.1.4.1.2011.6.36.1.70.10.1.3	INTEGER	read-write	Indicates the user group register URI mode. Options: 1. inneruser(1) -inner user 2. alone(2) -alone
OCT hwSipUserGroupUri	1.3.6.1.4.1.2011.6.36.1.70.10.1.4	OCTET STRING	read-write	Indicates the Register-URI of the sip user group.
OCT hwSipUserGroupName	1.3.6.1.4.1.2011.6.36.1.70.10.1.5	OCTET STRING	read-write	Indicates the sip user group Name.
OCT hwSipUserGroupAuthUserName	1.3.6.1.4.1.2011.6.36.1.70.10.1.6	OCTET STRING	read-write	Indicates the Auth Username of the sip user group.
INT hwSipUserGroupAuthPassWordMode	1.3.6.1.4.1.2011.6.36.1.70.10.1.7	INTEGER	read-write	Indicates the Auth PasswordMode of the sip user group. Options: 1. password(1) -auth by password 2. ha1(2) -auth by HA1
OCT hwSipUserGroupAuthPassword	1.3.6.1.4.1.2011.6.36.1.70.10.1.8	OCTET STRING	read-write	Indicates the Auth Password of the sip user group.
OCT hwSipUserGroupAuthHA1	1.3.6.1.4.1.2011.6.36.1.70.10.1.9	OCTET STRING	read-write	Indicates the Auth HA1 value of the sip user group.
INT hwSipUserGroupPrecinctMode	1.3.6.1.4.1.2011.6.36.1.70.10.1.10	INTEGER	read-write	Indicates the user PrecinctMode in the sip user group. Options: 1. local(1) -local 2. remote(2) -remote
INT hwSipUserGroupSubscribeUaProfileFlag	1.3.6.1.4.1.2011.6.36.1.70.10.1.11	INTEGER	read-write	Indicates the flag of the user group with the same UA Profile privilege. Options: 1. enable(1) -enable 2. disable(2) -disable
ROW hwSipUserGroupRowStatus	1.3.6.1.4.1.2011.6.36.1.70.10.1.12	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and to delete existing rows.
INT hwSipUserGroupAdminStatus	1.3.6.1.4.1.2011.6.36.1.70.10.1.13	INTEGER	read-write	Indicates the admin operation of the sip user group. Options: 1. endservice(1) -end service 2. startservice(2) -start service
INT hwSipUserGroupRunningState	1.3.6.1.4.1.2011.6.36.1.70.10.1.14	INTEGER	read-only	Indicates the service state of user group. Options: 1. null(1) -null 2. startSvc(2) -start service 3. rBlock(3) -remote block 4. lBlock(4) -local block
hwSipMgSoftStringParameterConfigTable	1.3.6.1.4.1.2011.6.36.1.70.11		not-accessible	This table is used to config the soft string Parameters of SIP interface. The index of this table is hwSipMgSoftStringMgInterfaceIndexConfig.
hwSipMgSoftStringParameterConfigEntry	1.3.6.1.4.1.2011.6.36.1.70.11.1		not-accessible	This table is used to config the soft string Parameters of SIP interface. The index of this entry is hwSipMgSoftStringMgInterfaceIndexConfig.
I32 hwSipMgSoftStringMgInterfaceIndexConfig	1.3.6.1.4.1.2011.6.36.1.70.11.1.1	Integer32	not-accessible	SIP GateWay ID.
OCT hwSipMgSoftStringConfigParameter0	1.3.6.1.4.1.2011.6.36.1.70.11.1.2	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter0, Reserved.
OCT hwSipMgSoftStringConfigParameter1	1.3.6.1.4.1.2011.6.36.1.70.11.1.3	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter1, visited network.
OCT hwSipMgSoftStringConfigParameter2	1.3.6.1.4.1.2011.6.36.1.70.11.1.4	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter2. Prefix of national long-distance call.
OCT hwSipMgSoftStringConfigParameter3	1.3.6.1.4.1.2011.6.36.1.70.11.1.5	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter3. Prefix of international long-distance call.
OCT hwSipMgSoftStringConfigParameter4	1.3.6.1.4.1.2011.6.36.1.70.11.1.6	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter4. CC number string.
OCT hwSipMgSoftStringConfigParameter5	1.3.6.1.4.1.2011.6.36.1.70.11.1.7	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter5. NDC number string.
OCT hwSipMgSoftStringConfigParameter6	1.3.6.1.4.1.2011.6.36.1.70.11.1.8	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter6. SCC domain name.
OCT hwSipMgSoftStringConfigParameter7	1.3.6.1.4.1.2011.6.36.1.70.11.1.9	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter7. Reserved.
OCT hwSipMgSoftStringConfigParameter8	1.3.6.1.4.1.2011.6.36.1.70.11.1.10	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter8. Reserved.
OCT hwSipMgSoftStringConfigParameter9	1.3.6.1.4.1.2011.6.36.1.70.11.1.11	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter9. Reserved.
OCT hwSipMgSoftStringConfigParameter10	1.3.6.1.4.1.2011.6.36.1.70.11.1.12	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter10. Reserved.
OCT hwSipMgSoftStringConfigParameter11	1.3.6.1.4.1.2011.6.36.1.70.11.1.13	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter11. Character string indicating that CLID or COLP is unavailable.
OCT hwSipMgSoftStringConfigParameter12	1.3.6.1.4.1.2011.6.36.1.70.11.1.14	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter12. Reserved.
OCT hwSipMgSoftStringConfigParameter13	1.3.6.1.4.1.2011.6.36.1.70.11.1.15	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter13. Character string indicating that CLID or COLP is not subscribed.
OCT hwSipMgSoftStringConfigParameter14	1.3.6.1.4.1.2011.6.36.1.70.11.1.16	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter14. SCC code of the MCID service. Pattern for similar regular expressions: 1 Supported characters: #xX[]().^\|-0123456789'capital parentheses'; 2 x and X indicate a digit ranging from 0 to 9; 3 [] indicates a matching range. For example, [0-37] indicates matching range 01237; 4 'capital parentheses'indicates the maximum number that the preceding item can be mapped. The range is 0 to 64; 5 () is used to extract characters in some scenarios; 6 . indicates that the preceding item can be mapped to one to multiple times; 7 ^ can only be the first symbol in [], indicating a supplementary set of a common mapping range. For example, [^0-7] indicates mapping range 89# 8 \| is used to separate multiple sub-expressions and each sub-expression is mapped separately; 9 - is used in [] or 'capital parentheses', indicating a range from the previous digit to the subsequent digit;
OCT hwSipMgSoftStringConfigParameter15	1.3.6.1.4.1.2011.6.36.1.70.11.1.17	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter15. SCC code for activating the CFU service.
OCT hwSipMgSoftStringConfigParameter16	1.3.6.1.4.1.2011.6.36.1.70.11.1.18	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter16. SCC code for deactivating the CFU service.
OCT hwSipMgSoftStringConfigParameter17	1.3.6.1.4.1.2011.6.36.1.70.11.1.19	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter17. Owner name of o-row parameter of SDP. If is not configured, the default value is Huawei.
OCT hwSipMgSoftStringConfigParameter18	1.3.6.1.4.1.2011.6.36.1.70.11.1.20	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter18. Session name of s-row parameter of SDP. If is not configured, the default value is -.
OCT hwSipMgSoftStringConfigParameter19	1.3.6.1.4.1.2011.6.36.1.70.11.1.21	OCTET STRING	read-only	The SIP MgSoftStringConfigParameter19. Ring mode name of back ring.
OCT hwSipMgSoftStringConfigParameter20	1.3.6.1.4.1.2011.6.36.1.70.11.1.22	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter20. Hook flash event report content. If it is not configured, the default value is FLASH.
OCT hwSipMgSoftStringConfigParameter21	1.3.6.1.4.1.2011.6.36.1.70.11.1.23	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter21. Resource priority header field parameter of CAT1 common call.
OCT hwSipMgSoftStringConfigParameter22	1.3.6.1.4.1.2011.6.36.1.70.11.1.24	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter22. Resource priority header field parameter of CAT2 common call.
OCT hwSipMgSoftStringConfigParameter23	1.3.6.1.4.1.2011.6.36.1.70.11.1.25	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter23. Resource priority header field parameter of CAT3 common call.
OCT hwSipMgSoftStringConfigParameter24	1.3.6.1.4.1.2011.6.36.1.70.11.1.26	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter24. Resource priority header field parameter of CAT1 emergency call.
OCT hwSipMgSoftStringConfigParameter25	1.3.6.1.4.1.2011.6.36.1.70.11.1.27	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter25. Resource priority header field parameter of CAT2 emergency call.
OCT hwSipMgSoftStringConfigParameter26	1.3.6.1.4.1.2011.6.36.1.70.11.1.28	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter26. Resource priority header field parameter of CAT3 emergency call.
OCT hwSipMgSoftStringConfigParameter27	1.3.6.1.4.1.2011.6.36.1.70.11.1.29	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter27. SERVICEDOMAIN in URI of ROUTE header field.
OCT hwSipMgSoftStringConfigParameter28	1.3.6.1.4.1.2011.6.36.1.70.11.1.30	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter28. SCC code for activating a service. To activate multiple services, the codes are separated by semicolon (;). The first supported service is CW service.
OCT hwSipMgSoftStringConfigParameter29	1.3.6.1.4.1.2011.6.36.1.70.11.1.31	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter29. SCC code for deactivating a service. To deactivate multiple services, the codes are separated by semicolon (;). The first supported service is CW service.
OCT hwSipMgSoftStringConfigParameter30	1.3.6.1.4.1.2011.6.36.1.70.11.1.32	OCTET STRING	read-only	The SIP MgSoftStringConfigParameter30. Ring mode name of default ring.
OCT hwSipMgSoftStringConfigParameter31	1.3.6.1.4.1.2011.6.36.1.70.11.1.33	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter31. SCC1 code for activating the customized event. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
OCT hwSipMgSoftStringConfigParameter32	1.3.6.1.4.1.2011.6.36.1.70.11.1.34	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter32. SCC2 code for activating the customized event. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
OCT hwSipMgSoftStringConfigParameter33	1.3.6.1.4.1.2011.6.36.1.70.11.1.35	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter33. SCC3 code for activating the customized event. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
OCT hwSipMgSoftStringConfigParameter34	1.3.6.1.4.1.2011.6.36.1.70.11.1.36	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter34. Indicate the p-Access-Network-Info head of POTS.
OCT hwSipMgSoftStringConfigParameter35	1.3.6.1.4.1.2011.6.36.1.70.11.1.37	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter35. Indicate the p-Access-Network-Info head of BRI.
OCT hwSipMgSoftStringConfigParameter36	1.3.6.1.4.1.2011.6.36.1.70.11.1.38	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter36. Indicate the p-Access-Network-Info head of PRI.
OCT hwSipMgSoftStringConfigParameter37	1.3.6.1.4.1.2011.6.36.1.70.11.1.39	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter37. Default hotline number.
OCT hwSipMgSoftStringConfigParameter38	1.3.6.1.4.1.2011.6.36.1.70.11.1.40	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter38. Character string indicating that CLID or COLP is restricted.
OCT hwSipMgSoftStringConfigParameter39	1.3.6.1.4.1.2011.6.36.1.70.11.1.41	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter39. Indicate the p-Access-Network-Info head of R2.
OCT hwSipMgSoftStringConfigParameter40	1.3.6.1.4.1.2011.6.36.1.70.11.1.42	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter40. Indicate URI for emergency calls.
OCT hwSipMgSoftStringConfigParameter41	1.3.6.1.4.1.2011.6.36.1.70.11.1.43	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter41. SCC5 code for activating the customized event. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
OCT hwSipMgSoftStringConfigParameter42	1.3.6.1.4.1.2011.6.36.1.70.11.1.44	OCTET STRING	read-write	The SIP MgSoftStringConfigParameter42. Indicate the pattern for fixed phone number. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
hwSipMgSoftStringParameterRunningTable	1.3.6.1.4.1.2011.6.36.1.70.12		not-accessible	This table is used to config the soft string Parameters of SIP interface. The index of this table is hwSipMgSoftStringMgInterfaceIndexRunning.
hwSipMgSoftStringParameterRunningEntry	1.3.6.1.4.1.2011.6.36.1.70.12.1		not-accessible	This table is used to config the soft string Parameters of SIP interface. The index of this entry is hwSipMgSoftStringMgInterfaceIndexRunning.
I32 hwSipMgSoftStringMgInterfaceIndexRunning	1.3.6.1.4.1.2011.6.36.1.70.12.1.1	Integer32	not-accessible	SIP GateWay ID.
OCT hwSipMgSoftStringRunningParameter0	1.3.6.1.4.1.2011.6.36.1.70.12.1.2	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter0. Reserved.
OCT hwSipMgSoftStringRunningParameter1	1.3.6.1.4.1.2011.6.36.1.70.12.1.3	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter1. Visited newwork ID.
OCT hwSipMgSoftStringRunningParameter2	1.3.6.1.4.1.2011.6.36.1.70.12.1.4	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter2. Prefix of national long-distance call.
OCT hwSipMgSoftStringRunningParameter3	1.3.6.1.4.1.2011.6.36.1.70.12.1.5	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter3. Prefix of international long-distance call.
OCT hwSipMgSoftStringRunningParameter4	1.3.6.1.4.1.2011.6.36.1.70.12.1.6	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter4. CC number string.
OCT hwSipMgSoftStringRunningParameter5	1.3.6.1.4.1.2011.6.36.1.70.12.1.7	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter5. NDC number string.
OCT hwSipMgSoftStringRunningParameter6	1.3.6.1.4.1.2011.6.36.1.70.12.1.8	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter6. SCC domain name.
OCT hwSipMgSoftStringRunningParameter7	1.3.6.1.4.1.2011.6.36.1.70.12.1.9	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter7. Reserved.
OCT hwSipMgSoftStringRunningParameter8	1.3.6.1.4.1.2011.6.36.1.70.12.1.10	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter8. Reserved.
OCT hwSipMgSoftStringRunningParameter9	1.3.6.1.4.1.2011.6.36.1.70.12.1.11	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter9. Reserved.
OCT hwSipMgSoftStringRunningParameter10	1.3.6.1.4.1.2011.6.36.1.70.12.1.12	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter10. Reserved.
OCT hwSipMgSoftStringRunningParameter11	1.3.6.1.4.1.2011.6.36.1.70.12.1.13	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter11. Character string indicating that CLID or COLP is unavailable.
OCT hwSipMgSoftStringRunningParameter12	1.3.6.1.4.1.2011.6.36.1.70.12.1.14	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter12. Reserved.
OCT hwSipMgSoftStringRunningParameter13	1.3.6.1.4.1.2011.6.36.1.70.12.1.15	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter13. Character string indicating that CLID or COLP is not subscribed.
OCT hwSipMgSoftStringRunningParameter14	1.3.6.1.4.1.2011.6.36.1.70.12.1.16	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter14. SCC code of the MCID service.
OCT hwSipMgSoftStringRunningParameter15	1.3.6.1.4.1.2011.6.36.1.70.12.1.17	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter15. SCC code for activating the CFU service.
OCT hwSipMgSoftStringRunningParameter16	1.3.6.1.4.1.2011.6.36.1.70.12.1.18	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter16. SCC code for deactivating the CFU service.
OCT hwSipMgSoftStringRunningParameter17	1.3.6.1.4.1.2011.6.36.1.70.12.1.19	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter17. Owner name of o-row parameter of SDP. If is not configured, the default value is Huawei.
OCT hwSipMgSoftStringRunningParameter18	1.3.6.1.4.1.2011.6.36.1.70.12.1.20	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter18. Session name of s-row parameter of SDP. If is not configured, the default value is -.
OCT hwSipMgSoftStringRunningParameter19	1.3.6.1.4.1.2011.6.36.1.70.12.1.21	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter19. Ring mode name of back ring.
OCT hwSipMgSoftStringRunningParameter20	1.3.6.1.4.1.2011.6.36.1.70.12.1.22	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter20. Hook flash event report content. If it is not configured, the default value is FLASH.
OCT hwSipMgSoftStringRunningParameter21	1.3.6.1.4.1.2011.6.36.1.70.12.1.23	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter21. Resource priority header field parameter of CAT1 common call.
OCT hwSipMgSoftStringRunningParameter22	1.3.6.1.4.1.2011.6.36.1.70.12.1.24	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter22. Resource priority header field parameter of CAT2 common call.
OCT hwSipMgSoftStringRunningParameter23	1.3.6.1.4.1.2011.6.36.1.70.12.1.25	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter23. Resource priority header field parameter of CAT3 common call.
OCT hwSipMgSoftStringRunningParameter24	1.3.6.1.4.1.2011.6.36.1.70.12.1.26	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter24. Resource priority header field parameter of CAT1 emergency call.
OCT hwSipMgSoftStringRunningParameter25	1.3.6.1.4.1.2011.6.36.1.70.12.1.27	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter25. Resource priority header field parameter of CAT2 emergency call.
OCT hwSipMgSoftStringRunningParameter26	1.3.6.1.4.1.2011.6.36.1.70.12.1.28	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter26. Resource priority header field parameter of CAT3 emergency call.
OCT hwSipMgSoftStringRunningParameter27	1.3.6.1.4.1.2011.6.36.1.70.12.1.29	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter27. SERVICEDOMAIN in URI of ROUTE header field.
OCT hwSipMgSoftStringRunningParameter28	1.3.6.1.4.1.2011.6.36.1.70.12.1.30	OCTET STRING	read-only	The SIP MgSoftStringConfigParameter28. SCC code for activating a service. To activate multiple services, the codes are separated by semicolon (;). The first supported service is CW service.
OCT hwSipMgSoftStringRunningParameter29	1.3.6.1.4.1.2011.6.36.1.70.12.1.31	OCTET STRING	read-only	The SIP MgSoftStringConfigParameter29. SCC code for deactivating a service. To deactivate multiple services, the codes are separated by semicolon (;). The first supported service is CW service.
OCT hwSipMgSoftStringRunningParameter30	1.3.6.1.4.1.2011.6.36.1.70.12.1.32	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter30. Ring mode name of default ring.
OCT hwSipMgSoftStringRunningParameter31	1.3.6.1.4.1.2011.6.36.1.70.12.1.33	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter31. SCC1 code for activating the customized event.
OCT hwSipMgSoftStringRunningParameter32	1.3.6.1.4.1.2011.6.36.1.70.12.1.34	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter32. SCC2 code for activating the customized event.
OCT hwSipMgSoftStringRunningParameter33	1.3.6.1.4.1.2011.6.36.1.70.12.1.35	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter33. SCC3 code for activating the customized event.
OCT hwSipMgSoftStringRunningParameter34	1.3.6.1.4.1.2011.6.36.1.70.12.1.36	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter34. Indicates the p-Access-Network-Info header of POTS.
OCT hwSipMgSoftStringRunningParameter35	1.3.6.1.4.1.2011.6.36.1.70.12.1.37	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter35. Indicates the p-Access-Network-Info header of BRI.
OCT hwSipMgSoftStringRunningParameter36	1.3.6.1.4.1.2011.6.36.1.70.12.1.38	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter36. Indicates the p-Access-Network-Info header of PRI.
OCT hwSipMgSoftStringRunningParameter37	1.3.6.1.4.1.2011.6.36.1.70.12.1.39	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter37. Default hotline number.
OCT hwSipMgSoftStringRunningParameter38	1.3.6.1.4.1.2011.6.36.1.70.12.1.40	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter38. Character string indicating that CLID or COLP is restricted.
OCT hwSipMgSoftStringRunningParameter39	1.3.6.1.4.1.2011.6.36.1.70.12.1.41	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter39. Indicates the p-Access-Network-Info header of R2.
OCT hwSipMgSoftStringRunningParameter40	1.3.6.1.4.1.2011.6.36.1.70.12.1.42	OCTET STRING	read-only	The SIP MgSoftStringRunningParameter40. Indicates URI for emergency calls.
OCT hwSipMgSoftStringRunningParameter41	1.3.6.1.4.1.2011.6.36.1.70.12.1.43	OCTET STRING	read-only	The SIP MgSoftStringConfigParameter41. SCC5 code for activating the customized event.
OCT hwSipMgSoftStringRunningParameter42	1.3.6.1.4.1.2011.6.36.1.70.12.1.44	OCTET STRING	read-only	The SIP MgSoftStringConfigParameter42. Indicates the pattern for fixed phone number.
hwVGWDigitMapGroupRefTable	1.3.6.1.4.1.2011.6.36.1.70.13		not-accessible	This table is used to config the digitmap group refered to a gateway. The index of this table is hwVGWDigitMapGroupInterfaceID.
hwVGWDigitMapGroupRefEntry	1.3.6.1.4.1.2011.6.36.1.70.13.1		not-accessible	This table is used to config the digitmap group refered to a gateway. The index of this entry is hwVGWDigitMapGroupInterfaceID.
I32 hwVGWDigitMapGroupInterfaceID	1.3.6.1.4.1.2011.6.36.1.70.13.1.1	Integer32	not-accessible	Indicates the ID of SIP gate way.
OCT hwVGWDigitMapGroupName	1.3.6.1.4.1.2011.6.36.1.70.13.1.2	OCTET STRING	read-write	Indicates the digitmap group refer to SIP gateway.
hwVGWISDNCauseResponseMapTable	1.3.6.1.4.1.2011.6.36.1.70.14		not-accessible	This table is used to config the Q.850 Code to SIP Response code. The index of this table is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
hwVGWISDNCauseResponseMapEntry	1.3.6.1.4.1.2011.6.36.1.70.14.1		not-accessible	This table is used to config the Q.850 Code to SIP Response code. The index of this entry is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
I32 hwIsdnCauseMapMgId	1.3.6.1.4.1.2011.6.36.1.70.14.1.1	Integer32	not-accessible	Indicates the ID of SIP Interface.
I32 hwIsdnCauseMapCause	1.3.6.1.4.1.2011.6.36.1.70.14.1.2	Integer32	not-accessible	Indicates the Isdn Cause.
I32 hwIsdnCauseMapSipResponse	1.3.6.1.4.1.2011.6.36.1.70.14.1.3	Integer32	read-write	Indicates the Sip Response Code.
ROW hwIsdnCauseMapRowStatus	1.3.6.1.4.1.2011.6.36.1.70.14.1.4	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and to delete existing rows.
hwVGWSIPResponseCauseMapTable	1.3.6.1.4.1.2011.6.36.1.70.15		not-accessible	This table is used to config the SIP Response code to Q.850 Code. The index of this table is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
hwVGWSIPResponseCauseMapEntry	1.3.6.1.4.1.2011.6.36.1.70.15.1		not-accessible	This table is used to config the SIP Response code to Q.850 Code. The index of this entry is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
I32 hwSipResponseMapMgId	1.3.6.1.4.1.2011.6.36.1.70.15.1.1	Integer32	not-accessible	Indicates the ID of SIP Interface.
I32 hwSipResponseMapResponse	1.3.6.1.4.1.2011.6.36.1.70.15.1.2	Integer32	not-accessible	Indicates the Sip Response Cause.
I32 hwSipResponseMapIsdnCause	1.3.6.1.4.1.2011.6.36.1.70.15.1.3	Integer32	read-write	Indicates the Q.850 Cause Code.
ROW hwSipResponseMapRowStatus	1.3.6.1.4.1.2011.6.36.1.70.15.1.4	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and to delete existing rows.
hwVGWSIPResponseCauseMapRunningTable	1.3.6.1.4.1.2011.6.36.1.70.16		not-accessible	This table is used to config the SIP Response code to Q.850 Code. The index of this table is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
hwVGWSIPResponseCauseMapRunningEntry	1.3.6.1.4.1.2011.6.36.1.70.16.1		not-accessible	This table is used to config the SIP Response code to Q.850 Code. The index of this entry is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
I32 hwSipResponseMaprunningMgId	1.3.6.1.4.1.2011.6.36.1.70.16.1.1	Integer32	not-accessible	Indicates the ID of SIP Interface.
I32 hwSipResponseMaprunningResponse	1.3.6.1.4.1.2011.6.36.1.70.16.1.2	Integer32	not-accessible	Indicates the Sip Response Cause.
I32 hwSipResponseMaprunningIsdnCause	1.3.6.1.4.1.2011.6.36.1.70.16.1.3	Integer32	read-only	Indicates the Q.850 Cause Code.
hwVGWISDNCauseResponseMapRunningTable	1.3.6.1.4.1.2011.6.36.1.70.17		not-accessible	This table is used to config the Q.850 Code to SIP Response code. The index of this table is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
hwVGWISDNCauseResponseMapRunningEntry	1.3.6.1.4.1.2011.6.36.1.70.17.1		not-accessible	This table is used to config the Q.850 Code to SIP Response code. The index of this entry is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
I32 hwIsdnCauseMaprunningMgId	1.3.6.1.4.1.2011.6.36.1.70.17.1.1	Integer32	not-accessible	Indicates the ID of SIP Interface.
I32 hwIsdnCauseMaprunningCause	1.3.6.1.4.1.2011.6.36.1.70.17.1.2	Integer32	not-accessible	Indicates the Isdn Cause.
I32 hwIsdnCauseMaprunningSipResponse	1.3.6.1.4.1.2011.6.36.1.70.17.1.3	Integer32	read-only	Indicates the Sip Response Code.
hwSipHuntingGroupTable	1.3.6.1.4.1.2011.6.36.1.70.18		not-accessible	This table is used to config the parameters of sip hunting group. The indexes of this table are hwSipHGVgwId, hwSipHGName.
hwSipHuntingGroupEntry	1.3.6.1.4.1.2011.6.36.1.70.18.1		not-accessible	This table is used to config the parameters of sip hunting group. The indexes of this entry are hwSipHGVgwId, hwSipHGName.
I32 hwSipHGVgwId	1.3.6.1.4.1.2011.6.36.1.70.18.1.1	Integer32	not-accessible	SIP GateWay ID.
OCT hwSipHGName	1.3.6.1.4.1.2011.6.36.1.70.18.1.2	OCTET STRING	not-accessible	Indicates the sip hunting group Name.
INT hwSipHGHuntingMode	1.3.6.1.4.1.2011.6.36.1.70.18.1.3	INTEGER	read-write	Indicates the Hunting Mode of the sip hunting group. Options: 1. order(1) -hunt by order 2. round(2) -hunt by round robin Default: round(2)
INT hwSipHGInheritFlag	1.3.6.1.4.1.2011.6.36.1.70.18.1.4	INTEGER	read-write	Indicates the inheritance flag of the hunting group. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
ROW hwSipHGRowStatus	1.3.6.1.4.1.2011.6.36.1.70.18.1.5	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and to delete existing rows.
hwSipHuntingGroupMemberTable	1.3.6.1.4.1.2011.6.36.1.70.19		not-accessible	This table is used to config the parameters of sip hunting group member. The indexes of this table are hwSipHGMemberGroupName, hwSipHGMemberPortIndex, hwSipHGMemberSubGroupName.
hwSipHuntingGroupMemberEntry	1.3.6.1.4.1.2011.6.36.1.70.19.1		not-accessible	This table is used to config the parameters of sip hunting group member. The indexes of this entry are hwSipHGMemberGroupName, hwSipHGMemberPortIndex, hwSipHGMemberSubGroupName.
OCT hwSipHGMemberGroupName	1.3.6.1.4.1.2011.6.36.1.70.19.1.1	OCTET STRING	not-accessible	Indicates the sip hunting group member Name.
U32 hwSipHGMemberPortIndex	1.3.6.1.4.1.2011.6.36.1.70.19.1.2	Unsigned32	not-accessible	Indicates the index of the port member in sip hunting group.
OCT hwSipHGMemberSubGroupName	1.3.6.1.4.1.2011.6.36.1.70.19.1.3	OCTET STRING	not-accessible	Indicates the subgroup name in sip hunting group.
I32 hwSipHGMemberOrder	1.3.6.1.4.1.2011.6.36.1.70.19.1.4	Integer32	read-write	Indicates the priority of member in the sip hunting group.
ROW hwSipHGMemberRowStatus	1.3.6.1.4.1.2011.6.36.1.70.19.1.5	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and to delete existing rows.
hwSipGroupNumberConfigTable	1.3.6.1.4.1.2011.6.36.1.70.20		not-accessible	This table is used to config the parameters of sip group number. The indexes of this table are hwSipGroupNumberVgwId, hwSipGroupNumberUri.
hwSipGroupNumberConfigEntry	1.3.6.1.4.1.2011.6.36.1.70.20.1		not-accessible	This table is used to config the parameters of sip group number. The indexes of this entry are hwSipGroupNumberVgwId, hwSipGroupNumberUri.
I32 hwSipGroupNumberVgwId	1.3.6.1.4.1.2011.6.36.1.70.20.1.1	Integer32	not-accessible	SIP GateWay ID.
OCT hwSipGroupNumberUri	1.3.6.1.4.1.2011.6.36.1.70.20.1.2	OCTET STRING	not-accessible	Indicates the sip group number uri.
OCT hwSipGroupNumberGroupName	1.3.6.1.4.1.2011.6.36.1.70.20.1.3	OCTET STRING	read-write	Indicates the name of the sip group which the sip group number assigned to. The name cannot contain a question mark or double quotation marks.
ROW hwSipGroupNumberRowStatus	1.3.6.1.4.1.2011.6.36.1.70.20.1.4	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and to delete existing rows.
hwSipGroupNumberOperTable	1.3.6.1.4.1.2011.6.36.1.70.21		not-accessible	This table is used to operate the sip group number. The indexes of this table are hwSipGroupNumberOperVgwId, hwSipGroupNumberOperUri.
hwSipGroupNumberOperEntry	1.3.6.1.4.1.2011.6.36.1.70.21.1		not-accessible	This table is used to operate the sip group number. The indexes of this entry are hwSipGroupNumberOperVgwId, hwSipGroupNumberOperUri.
I32 hwSipGroupNumberOperVgwId	1.3.6.1.4.1.2011.6.36.1.70.21.1.1	Integer32	not-accessible	SIP GateWay ID.
OCT hwSipGroupNumberOperUri	1.3.6.1.4.1.2011.6.36.1.70.21.1.2	OCTET STRING	not-accessible	Indicates the sip group number uri.
INT hwSipGroupNumberAdminState	1.3.6.1.4.1.2011.6.36.1.70.21.1.3	INTEGER	read-only	Indicates the Administration State of the sip group number. Options: 1. blockedLocally(1) -the service is blocked cause of the local reason 2. blockedRemotely(2) -the service is blocked cause of the remote reason 3. inService(3) -the service is normal
INT hwSipGroupNumberOperType	1.3.6.1.4.1.2011.6.36.1.70.21.1.4	INTEGER	read-write	Indicates the operation on the sip group number. Options: 1. endService(1) -end service 2. startService(2) -start service
hwSipGroupNumberRightTable	1.3.6.1.4.1.2011.6.36.1.70.22		not-accessible	This table is used to config service rights or authentication informations of sip group number. The indexes of this table are hwSipGroupNumberRightVgwId, hwSipGroupNumberRightUri.
hwSipGroupNumberRightEntry	1.3.6.1.4.1.2011.6.36.1.70.22.1		not-accessible	This table is used to config service rights or authentication informations of sip group number. The indexes of this entry are hwSipGroupNumberRightVgwId, hwSipGroupNumberRightUri.
I32 hwSipGroupNumberRightVgwId	1.3.6.1.4.1.2011.6.36.1.70.22.1.1	Integer32	not-accessible	SIP GateWay ID.
OCT hwSipGroupNumberRightUri	1.3.6.1.4.1.2011.6.36.1.70.22.1.2	OCTET STRING	not-accessible	Indicates the sip group number uri.
U32 hwSipGroupNumberRightCentrexNo	1.3.6.1.4.1.2011.6.36.1.70.22.1.3	Unsigned32	read-write	Indicates the centrexno of the sip group number.4294967295 means to clear the configuration.
OCT hwSipGroupNumberRightCentrexPrefix	1.3.6.1.4.1.2011.6.36.1.70.22.1.4	OCTET STRING	read-write	Indicates the centrexprefix of the sip group number.
INT hwSipGroupNumberRightCentrexFlag	1.3.6.1.4.1.2011.6.36.1.70.22.1.5	INTEGER	read-write	Indicates the centrex flag of the sip group number. Options: 1. dialDirectly(1) -dialDirectly 2. dialSecondary(2) -dialSecondary Default: dialDirectly(1)
INT hwSipGroupNumberRightCallHold	1.3.6.1.4.1.2011.6.36.1.70.22.1.6	INTEGER	read-write	Indicates the callhold right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
INT hwSipGroupNumberRightThreeParty	1.3.6.1.4.1.2011.6.36.1.70.22.1.7	INTEGER	read-write	Indicates the three-party right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
INT hwSipGroupNumberRightConf	1.3.6.1.4.1.2011.6.36.1.70.22.1.8	INTEGER	read-write	Indicates the conference right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
INT hwSipGroupNumberRightCt	1.3.6.1.4.1.2011.6.36.1.70.22.1.9	INTEGER	read-write	Indicates the calltransfer right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
INT hwSipGroupNumberRightMcid	1.3.6.1.4.1.2011.6.36.1.70.22.1.10	INTEGER	read-write	Indicates the mcid right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
OCT hwSipGroupNumberRightAuthName	1.3.6.1.4.1.2011.6.36.1.70.22.1.11	OCTET STRING	read-write	Indicates the Auth Name of the sip group number.
INT hwSipGroupNumberRightAuthPasswordMode	1.3.6.1.4.1.2011.6.36.1.70.22.1.12	INTEGER	read-write	Indicates the Auth PasswordMode of the sip group number. Options: 1. password(1) -auth by password 2. ha1(2) -auth by HA1
OCT hwSipGroupNumberRightAuthPassword	1.3.6.1.4.1.2011.6.36.1.70.22.1.13	OCTET STRING	read-write	Indicates the Auth Password of the sip group number.
OCT hwSipGroupNumberRightAuthHA1	1.3.6.1.4.1.2011.6.36.1.70.22.1.14	OCTET STRING	read-write	Indicates the Auth HA1 value of the sip group number.
INT hwSipGroupNumberRightCw	1.3.6.1.4.1.2011.6.36.1.70.22.1.15	INTEGER	read-write	Indicates the call-waiting right of the sip group number.It is valid to ring-parallel-group. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightDc	1.3.6.1.4.1.2011.6.36.1.70.22.1.16	INTEGER	read-write	Indicates the dual communication right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
INT hwSipGroupNumberRightMwi	1.3.6.1.4.1.2011.6.36.1.70.22.1.17	INTEGER	read-write	Indicates the mwi right of the sip group number.It is valid to ring-parallel-group. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightAnonymousCall	1.3.6.1.4.1.2011.6.36.1.70.22.1.18	INTEGER	read-write	Indicates the anonymous-call right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightAutoReversePolarity	1.3.6.1.4.1.2011.6.36.1.70.22.1.19	INTEGER	read-write	Indicates the auto reverse polarity right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightDisplayNameMode	1.3.6.1.4.1.2011.6.36.1.70.22.1.20	INTEGER	read-write	Indicates the display name mode right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightPermanentHold	1.3.6.1.4.1.2011.6.36.1.70.22.1.21	INTEGER	read-write	Indicates the permanent-hold right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightCutoffDisconnect	1.3.6.1.4.1.2011.6.36.1.70.22.1.22	INTEGER	read-write	Indicates the cutoff-disconnect right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightSccClass	1.3.6.1.4.1.2011.6.36.1.70.22.1.23	INTEGER	read-write	Indicates the SCC class service( for example call-park, call-pickup, EBO.) right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightFastDisconnect	1.3.6.1.4.1.2011.6.36.1.70.22.1.24	INTEGER	read-write	Indicates the fast-disconnect right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightHotLine	1.3.6.1.4.1.2011.6.36.1.70.22.1.25	INTEGER	read-write	Indicates the hotline right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
INT hwSipGroupNumberRightMwiMode	1.3.6.1.4.1.2011.6.36.1.70.22.1.26	INTEGER	read-write	Indicates the MwiMode of the sip group number.It is valid to ring-parallel-group. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine Default: deferred(1)
I32 hwSipGroupNumberRightHotTime	1.3.6.1.4.1.2011.6.36.1.70.22.1.27	Integer32	read-write	Indicates the HotTime of the sip group number.It is valid to PSTN users. Unit: second Default: 5
OCT hwSipGroupNumberRightHotLineNum	1.3.6.1.4.1.2011.6.36.1.70.22.1.28	OCTET STRING	read-write	Indicates the HotLineNum of the sip group number, the length of hotlinenum mustn't exceed 64.It is valid to PSTN users.
INT hwSipGroupNumberRightDialTone	1.3.6.1.4.1.2011.6.36.1.70.22.1.29	INTEGER	read-write	Indicates the DialTone of the sip group number. Options: 1. normal(1) -normal tone 2. special(2) -special tone 3. mw(3) -message waiting tone 4. stutter(4) -stutter tone Default: normal(1)
OCT hwSipGroupNumberRightCfbNum	1.3.6.1.4.1.2011.6.36.1.70.22.1.30	OCTET STRING	read-write	Indicates the CfbNum of the sip group number.It is valid to ring-parallel-group.
OCT hwSipGroupNumberRightCfnrNum	1.3.6.1.4.1.2011.6.36.1.70.22.1.31	OCTET STRING	read-write	Indicates the CfnrNum of the sip group number.It is valid to ring-parallel-group.
OCT hwSipGroupNumberRightCfuNum	1.3.6.1.4.1.2011.6.36.1.70.22.1.32	OCTET STRING	read-write	Indicates the CfuNum of the sip group number.It is valid to ring-parallel-group.
I32 hwSipGroupNumberRightCfnrTime	1.3.6.1.4.1.2011.6.36.1.70.22.1.33	Integer32	read-write	Indicates the CfnrTime of the sip group number.It is valid to ring-parallel-group. Unit: second Default: 100
OCT hwSipGroupNumberRightDisplayName	1.3.6.1.4.1.2011.6.36.1.70.22.1.34	OCTET STRING	read-write	Indicates the display name string. The character set is unrestricted.
INT hwSipGroupNumberRightPermanentHoldMode	1.3.6.1.4.1.2011.6.36.1.70.22.1.35	INTEGER	read-write	Indicates the PermanentHoldMode of the sip group number.It is valid to PSTN users. Options: 1. norecall(1) -no recall 2. reminder(2) -reminder 3. recall(3) -recall Default: norecall(1)
I32 hwSipGroupNumberRightPermanentHoldTime	1.3.6.1.4.1.2011.6.36.1.70.22.1.36	Integer32	read-write	Indicates the PermanentHoldTime of the sip group number.It is valid to PSTN users. Unit: second Default: 20
hwSipRingParallelGroupTable	1.3.6.1.4.1.2011.6.36.1.70.23		not-accessible	This table is used to config the parameters of sip ring-parallel-group. The indexes of this table are hwSipRPGVgwId, hwSipRPGName.
hwSipRingParallelGroupEntry	1.3.6.1.4.1.2011.6.36.1.70.23.1		not-accessible	This table is used to config the parameters of sip ring-parallel-group. The indexes of this entry are hwSipRPGVgwId, hwSipRPGName.
I32 hwSipRPGVgwId	1.3.6.1.4.1.2011.6.36.1.70.23.1.1	Integer32	not-accessible	SIP GateWay ID.
OCT hwSipRPGName	1.3.6.1.4.1.2011.6.36.1.70.23.1.2	OCTET STRING	not-accessible	Indicates the sip ring-parallel-group Name. The name cannot contain a question mark or double quotation marks.
INT hwSipRPGSelectMode	1.3.6.1.4.1.2011.6.36.1.70.23.1.3	INTEGER	read-write	Indicates the Select Mode of the sip ring-parallel-group. Options: 1. busyfirst(1) -hunt all busy members first 2. idlefirst(2) -hunt all idle members first Default: busyfirst(1)
ROW hwSipRPGRowStatus	1.3.6.1.4.1.2011.6.36.1.70.23.1.4	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and to delete existing rows.
hwSipRingParallelGroupMemberTable	1.3.6.1.4.1.2011.6.36.1.70.24		not-accessible	This table is used to config the parameters of sip ring-parallel-group member. The indexes of this table are hwSipRPGMemberGroupName, hwSipRPGMemberPortIndex.
hwSipRingParallelGroupMemberEntry	1.3.6.1.4.1.2011.6.36.1.70.24.1		not-accessible	This table is used to config the parameters of sip ring-parallel-group member. The indexes of this entry are hwSipRPGMemberGroupName, hwSipRPGMemberPortIndex.
OCT hwSipRPGMemberGroupName	1.3.6.1.4.1.2011.6.36.1.70.24.1.1	OCTET STRING	not-accessible	Indicates the sip ring-parallel-group member Name. The name cannot contain a question mark or double quotation marks.
U32 hwSipRPGMemberPortIndex	1.3.6.1.4.1.2011.6.36.1.70.24.1.2	Unsigned32	not-accessible	Indicates the index of the port member in sip ring-parallel-group.
ROW hwSipRPGMemberRowStatus	1.3.6.1.4.1.2011.6.36.1.70.24.1.3	RowStatus	read-write	This is used to create new rows in this table, modify existing rows, and to delete existing rows.
hwVGWLoadsharingRunningTable	1.3.6.1.4.1.2011.6.36.1.70.25		not-accessible	This table is used to query load sharing addresses of proxy. The indexes of this table are hwVGWLoadsharingRunningVgwId, hwVGWLoadsharingRunningAddressIndex.
hwVGWLoadsharingRunningEntry	1.3.6.1.4.1.2011.6.36.1.70.25.1		not-accessible	This table is used to query load sharing addresses of proxy. The indexes of this entry are hwVGWLoadsharingRunningVgwId, hwVGWLoadsharingRunningAddressIndex.
I32 hwVGWLoadsharingRunningVgwId	1.3.6.1.4.1.2011.6.36.1.70.25.1.1	Integer32	not-accessible	SIP GateWay ID.
I32 hwVGWLoadsharingRunningAddressIndex	1.3.6.1.4.1.2011.6.36.1.70.25.1.2	Integer32	not-accessible	Indicates address index.
IP hwVGWLoadsharingRunningIpAddress	1.3.6.1.4.1.2011.6.36.1.70.25.1.3	IpAddress	read-only	Indicates the load sharing IP of SipVgw.
I32 hwVGWLoadsharingRunningPort	1.3.6.1.4.1.2011.6.36.1.70.25.1.4	Integer32	read-only	Indicates the load sharing port of SipVgw.
hwIASVoipTraps	1.3.6.1.4.1.2011.6.36.2
hwIASVoipAlarmTraps	1.3.6.1.4.1.2011.6.36.2.0
hwIASVoipAlarmOids	1.3.6.1.4.1.2011.6.36.2.1
hwIASSipTrapsVbOids	1.3.6.1.4.1.2011.6.36.7
U32 hwSipTrapRequestID	1.3.6.1.4.1.2011.6.36.7.1	Unsigned32	accessible-for-notify	The SIP trap request ID.
INT hwSipMgResetResult	1.3.6.1.4.1.2011.6.36.7.2	INTEGER	accessible-for-notify	The result of the SIP media gateway reset. Options: 1. success(0) -reset succesful 2. failed(1) -reset failed
U32 hwSipProxySign	1.3.6.1.4.1.2011.6.36.7.3	Unsigned32	accessible-for-notify	The SIP proxy sign. 0 -main 1 -standby
hwIASSipTraps	1.3.6.1.4.1.2011.6.36.8
hwIASSipCommonTraps	1.3.6.1.4.1.2011.6.36.8.1
NTF hwIASSipResetTrap	1.3.6.1.4.1.2011.6.36.8.1.0.1			This notification indicates that the result of SIP media gateway reset operation.
hwIASSipAlarmTraps	1.3.6.1.4.1.2011.6.36.8.2
NTF hwIASSipProxyFaultTrap	1.3.6.1.4.1.2011.6.36.8.2.0.1			This notification indicates that the SIP proxy server is abnormal.
NTF hwIASSipProxyRestoreTrap	1.3.6.1.4.1.2011.6.36.8.2.0.2			This notification indicates that the SIP proxy server restores from abnormal.

RFC description

Huawei VoIP SIP MIB for managing SIP trunk configuration, proxy server addresses, and SIP call quality statistics.

Start monitoring Huawei VoIP gateways and softswitches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-VOIP-SIP-MIB

What Is HUAWEI-VOIP-SIP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description