HUAWEI-VOICEUSER-MIB

All MIBs › HUAWEI-VOICEUSER-MIB

Organization: Huawei Technologies Co., Ltd.

Last Updated: 2012-04-26

Category: Domain: Telephony/VoIP, Domain: VoIP/Telephony, Vendor: Huawei

Description: Huawei voice user MIB for managing VoIP subscriber profiles, phone numbers, and user authentication on IAD gateways.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-VOICEUSER-MIB?

HUAWEI-VOICEUSER-MIB is a Huawei-proprietary SNMP module for Huawei's voice-over-IP access gateways (IADs) that manages voice subscriber accounts, covering user profiles, assigned phone numbers, and authentication credentials for VoIP lines. It exposes subscriber-level configuration and status objects rather than call-detail records, letting an NMS see which lines are provisioned and how they are configured. Operators use it to monitor the software-level status of voice subscriber lines - whether a user's line is registered/authenticated correctly and provisioned as expected - which helps diagnose a subscriber who cannot make or receive calls due to a registration or authentication failure on the gateway. It complements Huawei's voice/media gateway MIBs and general telephony standards (conceptually related to the IETF VoIP MIB family) that handle call signaling and media status. It is typically deployed on Huawei Integrated Access Devices (IADs) and softswitch-connected voice gateways in carrier and enterprise VoIP access networks. Engineers can download the HUAWEI-VOICEUSER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-VOICEUSER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei VoIP Integrated Access Device (IAD)
Huawei voice gateway

Monitoring Examples

No object names were supplied for this MIB in the sample set, so specific identifiers cannot be quoted; based on the description, an operator would be expected to poll a per-line subscriber table indexed by port/line to confirm a user's authentication state and provisioned number match expectations when a subscriber reports being unable to register.

What Can Be Monitored

voice subscriber provisioning status
assigned phone number mapping
user authentication status
voice line configuration

Imported Objects

From HUAWEI-DEVICE-MIB

hwConfigChangeIP

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
private

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwIASVoiceUser	1.3.6.1.4.1.2011.6.112			This MIB module defines MIB objects which provides voice user management.
hwIASVoiceUserObjects	1.3.6.1.4.1.2011.6.112.1
hwPstnCTPConfigTable	1.3.6.1.4.1.2011.6.112.1.1		not-accessible	This table is used to add, delete, modify, and query the PSTN user. The index of this table is hwPstnCTPConfigIndex. The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether to support layering configuration, priority flag of the port for the overload control, user type, power-off interval, FSK delay interval, time for issuing the calling number, format for issuing the calling number, and limited pulse dialing. Through the table, you can configure, modify, and query the above-mentioned attributes of the PSTN user.
hwPstnCTPConfigEntry	1.3.6.1.4.1.2011.6.112.1.1.1		not-accessible	This table is used to add, delete, modify, and query the PSTN user. The index of this entry is hwPstnCTPConfigIndex. The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether to support layering configuration, priority flag of the port for the overload control, user type, power-off interval, FSK delay interval, time for issuing the calling number, format for issuing the calling number, and limited pulse dialing. Through the table, you can configure, modify, and query the above-mentioned attributes of the PSTN user.
I32 hwPstnCTPConfigIndex	1.3.6.1.4.1.2011.6.112.1.1.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 24 0 0011000 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for PSTN port, must be 0x18 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwPstnCTPMgId	1.3.6.1.4.1.2011.6.112.1.1.1.2	Integer32	read-create	Indicates the MG ID.
OCT hwPstnCTPTerminationID	1.3.6.1.4.1.2011.6.112.1.1.1.3	OCTET STRING	read-create	Indicates the terminal ID (only the character string of digit type is supported).
OCT hwPstnCTPTelNo	1.3.6.1.4.1.2011.6.112.1.1.1.4	OCTET STRING	read-create	Indicates the telephone number.
ROW hwPstnCTPRowStatus	1.3.6.1.4.1.2011.6.112.1.1.1.5	RowStatus	read-write	Indicates the row status.The operations include activate, shut down, not start, create and register, create and wait, and delete. The operations are not used in the V8R61.
INT hwPstnCTPLayerFlag	1.3.6.1.4.1.2011.6.112.1.1.1.6	INTEGER	read-only	Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value
INT hwPstnCTPPriorityFlag	1.3.6.1.4.1.2011.6.112.1.1.1.7	INTEGER	read-create	Indicates the priority of the terminal. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority
INT hwPstnCTPPotsLineType	1.3.6.1.4.1.2011.6.112.1.1.1.8	INTEGER	read-create	Indicates the subscriber type. Options: 1. del(1) -DEL 2. lcPBX(2) -Loop Calling PBX 3. ecPBX(3) -earth calling PBX 4. payPhone(4) -PayPhone
I32 hwPstnCTPDCTime	1.3.6.1.4.1.2011.6.112.1.1.1.9	Integer32	read-create	Indicates the disconnect clear interval. Unit: 10ms
I32 hwPstnCTPFSKDelayInterval	1.3.6.1.4.1.2011.6.112.1.1.1.10	Integer32	read-create	Indicates the FSK delay interval. Unit: 10ms
INT hwPstnCTPCidTransWhen	1.3.6.1.4.1.2011.6.112.1.1.1.11	INTEGER	read-create	Indicates the time for delivering the caller ID. Options: 1. afterRing(1) -transmit CID after ringing 2. beforeRing(2) -transmit CID before ringing
INT hwPstnCTPCidFormat	1.3.6.1.4.1.2011.6.112.1.1.1.12	INTEGER	read-create	Indicates the format of the caller ID. Options: 1. sdmfFsk(1) -SDMF FSK format 2. mdmfFsk(2) -MDMF FSK format 3. dtmf(3) -DTMF format 4. russia(4) -russia format 5. etsi(5) -etsi format
INT hwPstnCTPVQEAgc	1.3.6.1.4.1.2011.6.112.1.1.1.13	INTEGER	read-create	Indicates enable AGC or not. Options: 1. enable(1) -enable AGC 2. disable(2) -disable AGC
INT hwPstnCTPVQESns	1.3.6.1.4.1.2011.6.112.1.1.1.14	INTEGER	read-create	Indicates enable SNS or not. Options: 1. enable(1) -enable SNS 2. disable(2) -disable SNS
I32 hwPstnCTPVQEAgcLevel	1.3.6.1.4.1.2011.6.112.1.1.1.15	Integer32	read-create	Indicates set AGC target value. Unit: dbm0
I32 hwPstnCTPVQESnsLevel	1.3.6.1.4.1.2011.6.112.1.1.1.16	Integer32	read-create	Indicates set VQE noise suppression level. Unit: db
I32 hwPstnCTPDspInputGain	1.3.6.1.4.1.2011.6.112.1.1.1.17	Integer32	read-create	Dsp input gain. 1: -10db 2: -9db 3: -8db 4: -7db 5: -6db 6: -5db 7: -4db 8: -3db 9: -2db 10: -1db 11: 0db 12: 1db 13: 2db 14: 3db 15: 4db 16: 5db Unit: db
I32 hwPstnCTPDspOutputGain	1.3.6.1.4.1.2011.6.112.1.1.1.18	Integer32	read-create	Dsp output gain. 1: -10db 2: -9db 3: -8db 4: -7db 5: -6db 6: -5db 7: -4db 8: -3db 9: -2db 10: -1db 11: 0db 12: 1db 13: 2db 14: 3db 15: 4db 16: 5db 17: 6db 18: 7db 19: 8db 20: 9db 21: 10db Unit: db
INT hwPstnCTPDetectANSbarBySingleToneFlag	1.3.6.1.4.1.2011.6.112.1.1.1.19	INTEGER	read-create	It indicates whether the ANSbar signal detected by SingleTone is supported. Options: 1. enable(1) -the ANSbar signal detected by SingleTone is supported 2. disable(2) -the ANSbar signal detected by SingleTone is not supported
INT hwPstnCTPBellANSFlag	1.3.6.1.4.1.2011.6.112.1.1.1.20	INTEGER	read-create	It indicates whether the Bell ANS is supported. Options: 1. enable(1) -the Bell ANS is supported 2. disable(2) -the Bell ANS is not supported
OCT hwPstnCTPDspParaTemplate	1.3.6.1.4.1.2011.6.112.1.1.1.21	OCTET STRING	read-create	The index of dsp parameter template name.
INT hwPstnCTPCidFskMode	1.3.6.1.4.1.2011.6.112.1.1.1.22	INTEGER	read-create	It indicates the mode of fsk. Options: 1. bell202(1) -bell 202 2. ccittv23(2) -ccitt v23 3. ntt(3) -ntt
INT hwPstnCTPCidTasPattern	1.3.6.1.4.1.2011.6.112.1.1.1.23	INTEGER	read-create	It indicates the mode of tas. Options: 1. noTas(1) -no tas 2. dtAs(2) -DT as
I32 hwPstnCTPUserGroupid	1.3.6.1.4.1.2011.6.112.1.1.1.24	Integer32	read-write	It indicates the user group ID. -1 indicates clear the user group info.
OCT hwPstnCTPDigitMapGroupName	1.3.6.1.4.1.2011.6.112.1.1.1.25	OCTET STRING	read-write	It indicates the digitmap group name.
INT hwPstnCTPForceSendFsk	1.3.6.1.4.1.2011.6.112.1.1.1.26	INTEGER	read-create	Indicates enable force send FSK or not. Options: 1. enable(1) -enable force send FSK 2. disable(2) -disable force send FSK
I32 hwPstnCTPFSKAlertInterval	1.3.6.1.4.1.2011.6.112.1.1.1.27	Integer32	read-write	It indicates fskend to alert Interval. -1 indicate invalid value. Unit: 10ms
OCT hwPstnCTPConfigDefaultCli	1.3.6.1.4.1.2011.6.112.1.1.1.28	OCTET STRING	read-write	It indicates the default cli number of outgoing call.
I32 hwPstnCTPEOCTime	1.3.6.1.4.1.2011.6.112.1.1.1.29	Integer32	read-create	Indicates the end of call interval. Unit: 10ms
INT hwPstnCTPRemoteBlockPowerDeny	1.3.6.1.4.1.2011.6.112.1.1.1.30	INTEGER	read-write	Indicates the flag of remote block power deny. Options: 1. enable(1) - enable remote block power deny 2. disable(2) - disable remote block power deny
hwPstnCTPOperTable	1.3.6.1.4.1.2011.6.112.1.2		not-accessible	It is used to maintain PSTN ports with the VSP feature. The index of this table is hwPstnCTPOperIndex. Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, management status of the PSTN service, change time of the running status of the PSTN service, and change time of the management status of the PSTN service. Through the table, services on the PSTN port can be terminated, started, and the service status can be queried.
hwPstnCTPOperEntry	1.3.6.1.4.1.2011.6.112.1.2.1		not-accessible	It is used to maintain PSTN ports with the VSP feature. The index of this entry is hwPstnCTPOperIndex. Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, management status of the PSTN service, change time of the running status of the PSTN service, and change time of the management status of the PSTN service. Through the table, services on the PSTN port can be terminated, started, and the service status can be queried.
I32 hwPstnCTPOperIndex	1.3.6.1.4.1.2011.6.112.1.2.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 24 0 0011000 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for PSTN port, must be 0x18 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
INT hwPstnCTPSrvState	1.3.6.1.4.1.2011.6.112.1.2.1.2	INTEGER	read-only	Indicates the running status of the service layer of the PSTN port. Options: 1. fault(1)-the port is fault 2. idle(2) -the user is idle 3. offHook(3) -the user off-hook 4. lock(4) -the user is locked 5. ring(5) -the user is ringing
INT hwPstnCTPAdminState	1.3.6.1.4.1.2011.6.112.1.2.1.3	INTEGER	read-only	Indicates the administration status of the service layer of the PSTN port. Options: 1. blockedLocally(1) -the service is blocked cause of the local reason 2. blockedRemotely(2) -the service is blocked cause of the remote reason 3. inService(3) -the service is normal 4. shuttingDown(4) -the service is shutting down 5. delayTest(5) -the user is waiting for testing
INT hwPstnCTPAdminOper	1.3.6.1.4.1.2011.6.112.1.2.1.4	INTEGER	read-write	Indicates the maintenance operation of the service layer of the PSTN port. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully
TIK hwPstnCTPSrvStateChange	1.3.6.1.4.1.2011.6.112.1.2.1.5	TimeTicks	read-only	Indicates the service running status changing time of the PSTN port.
TIK hwPstnCTPAdminStateChange	1.3.6.1.4.1.2011.6.112.1.2.1.6	TimeTicks	read-only	Indicates the service administration status changing time of the PSTN port.
I32 hwPstnCTPMaxCobTime	1.3.6.1.4.1.2011.6.112.1.2.1.7	Integer32	read-write	Length of waiting timer for pstn user defer end service. 0 is not allowed to set. Default: 240 Unit: minute
INT hwPstnCTPOnexpire	1.3.6.1.4.1.2011.6.112.1.2.1.8	INTEGER	read-write	Indicates disposal mode when pstn user defer end service timeout. Options: 1. force(1) -force user to end service when end-service timeout 2. cancel(2) -cancel end service when end-service timeout Default: force(1)
INT hwPstnCTPRegState	1.3.6.1.4.1.2011.6.112.1.2.1.9	INTEGER	read-only	Indicates the register status of the PSTN port. Options: 1.initializing(1) - the user has not send register request 2.registering(2) - the user has send register request and is waiting for response 3.failRegistered(3) - the user received failed response or register timeout 4.unregistering(4) - the user is unregistering 5.active(5) - the user is actived 6.deactive(6) - the user is deactived 7. invalidusertype(7) -- the user is not SIP user
INT hwPstnCTPCallState	1.3.6.1.4.1.2011.6.112.1.2.1.10	INTEGER	read-only	Indicates the register status of the PSTN port. Options: 1. idle(1)- there is no call on the user 2. offhook(2)- the user hung up 3. dialing(3)- the user is dialing 4.establishing(4)- the call is establishing 5.ringing(5)- the phone is ringing 6.ringback(6)- the phone is ringback 7.connecting(7)- the call is connecting 8.connected(8)- the call is connected 9.hold(9)- the call is hold 10.disconnecting(10)- the call is disconnecting 11.locked(11)- the port is locked 12. invalidusertype(12) -- the user is not SIP user
INT hwPstnCTPCallWaitState	1.3.6.1.4.1.2011.6.112.1.2.1.11	INTEGER	read-only	Indicates the register status of the PSTN port. Options: 1. disable(1)- the service is disable 2. idle(2)- the is no callwaiting services 3. secondaryRinging(3)- the second part is ringing 4. secondaryConnecting(4)- the second part is connecting 5. secondaryConnected(5)- the second part is connected 6. secondaryDisconnecting(6)- the second part is disconnecting 7. invalidusertype(7) -- the user is not SIP user
hwMgPortStatisticsInfoTable	1.3.6.1.4.1.2011.6.112.1.3		not-accessible	This table is used to query the statistics of the MG service ports. The index of this table is hwMgPortStatInfoIndex.
hwMgPortStatisticsInfoEntry	1.3.6.1.4.1.2011.6.112.1.3.1		not-accessible	This table is used to query the statistics of the MG service ports. The index of this entry is hwMgPortStatInfoIndex.
I32 hwMgPortStatInfoIndex	1.3.6.1.4.1.2011.6.112.1.3.1.1	Integer32	not-accessible	Indicates the frame ID. The GetNext (walk) operation is to collect the statistics of each specified shelf of the system. In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of the entire system; if hwMgPortStatIndex is not all F, the operation is to collect the statistics of the specified shelf.
I32 hwPstnCTPStatTotalNum	1.3.6.1.4.1.2011.6.112.1.3.1.2	Integer32	read-only	Indicates the total number of the MGPSTN service ports.
I32 hwPstnCTPStatFaultNum	1.3.6.1.4.1.2011.6.112.1.3.1.3	Integer32	read-only	Indicates the number of the MGPSTN faulty ports.
I32 hwPstnCTPStatIdleNum	1.3.6.1.4.1.2011.6.112.1.3.1.4	Integer32	read-only	Indicates the number of the MGPSTN idle ports.
I32 hwPstnCTPStatOffhookNum	1.3.6.1.4.1.2011.6.112.1.3.1.5	Integer32	read-only	Indicates the number of the MGPSTN off-hooked ports.
I32 hwPstnCTPStatParkingNum	1.3.6.1.4.1.2011.6.112.1.3.1.6	Integer32	read-only	Indicates the number of the MGPSTN locked ports.
I32 hwPstnCTPStatRingNum	1.3.6.1.4.1.2011.6.112.1.3.1.7	Integer32	read-only	Indicates the number of the MGPSTN ringing ports.
I32 hwMgPortStatInfoTotalNum	1.3.6.1.4.1.2011.6.112.1.3.1.8	Integer32	read-only	Indicates the total number of the MG service ports.
I32 hwMgPortStatInfoUseableNum	1.3.6.1.4.1.2011.6.112.1.3.1.9	Integer32	read-only	Indicates the number of the MG idle ports.
I32 hwMgPortStatInfoBusyNum	1.3.6.1.4.1.2011.6.112.1.3.1.10	Integer32	read-only	Indicates the number of the MG busy ports.
I32 hwMgPortStatInfoFaultNum	1.3.6.1.4.1.2011.6.112.1.3.1.11	Integer32	read-only	Indicates the number of the MG faulty ports.
I32 hwMgPortStatInfoForbiddenNum	1.3.6.1.4.1.2011.6.112.1.3.1.12	Integer32	read-only	Indicates the number of the MG blocked ports.
hwBraCTPConfigTable	1.3.6.1.4.1.2011.6.112.1.4		not-accessible	It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature. The index of this table is hwBraCTPConfigIndex. The attributes of an ISDN user with the VoIP feature include the gateway ID, terminal ID, IUA link group, interface ID, and telephone number. Through the table, you can configure, modify, and query the above-mentioned attributes of the BRA user.
hwBraCTPConfigEntry	1.3.6.1.4.1.2011.6.112.1.4.1		not-accessible	It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature. The index of this entry is hwBraCTPConfigIndex. The attributes of an ISDN user with the VoIP feature include the gateway ID, terminal ID, IUA link group, interface ID, and telephone number. Through the table, you can configure, modify, and query the above-mentioned attributes of the BRA user.
I32 hwBraCTPConfigIndex	1.3.6.1.4.1.2011.6.112.1.4.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 25 0 0011001 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwBraCTPMgId	1.3.6.1.4.1.2011.6.112.1.4.1.2	Integer32	read-create	Indicates the MG ID.
OCT hwBraCTPTerminationID	1.3.6.1.4.1.2011.6.112.1.4.1.3	OCTET STRING	read-create	Indicates the start terminal ID (only the character string of digit type is supported).
OCT hwBraCTPTelNo	1.3.6.1.4.1.2011.6.112.1.4.1.4	OCTET STRING	read-create	Indicates the BRA telephone number.
I32 hwBraCTPLinkSetNo	1.3.6.1.4.1.2011.6.112.1.4.1.5	Integer32	read-create	Indicates the link set to which the BRA terminal belongs (the value range depends on the product specifications).
I32 hwBraCTPIuaIID	1.3.6.1.4.1.2011.6.112.1.4.1.6	Integer32	read-create	Indicates the interface ID of the BRA terminal. -1 means this parameter is not used.
ROW hwBraCTPRowStatus	1.3.6.1.4.1.2011.6.112.1.4.1.7	RowStatus	read-write	Indicates the row status.
INT hwBraCTPPriorityFlag	1.3.6.1.4.1.2011.6.112.1.4.1.8	INTEGER	read-create	Indicates the priority of the terminal. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority Default: cat3(3)
INT hwBraCTPLayerFlag	1.3.6.1.4.1.2011.6.112.1.4.1.9	INTEGER	read-only	Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value
INT hwBraCTPUniErrReport	1.3.6.1.4.1.2011.6.112.1.4.1.10	INTEGER	read-write	UNI fault report flag of bra user. Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1)
I32 hwBraCTPAutoResumeLimit	1.3.6.1.4.1.2011.6.112.1.4.1.11	Integer32	read-write	Indicates auto resume times threshold of bra user. Default: 20
OCT hwBraCTPIuaTextIID	1.3.6.1.4.1.2011.6.112.1.4.1.12	OCTET STRING	read-create	Use the text to indicate the interface ID of the BRA terminal. Config area 0~65535. Display area 0~53.
INT hwBraCTPPowerDialerSupport	1.3.6.1.4.1.2011.6.112.1.4.1.13	INTEGER	read-write	Powerdialer support flag of bra user. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
I32 hwBraCTPUserGroupid	1.3.6.1.4.1.2011.6.112.1.4.1.14	Integer32	read-write	It indicates the user group ID. -1 indicates clear the user group info.
OCT hwBraCTPDigitMapGroupName	1.3.6.1.4.1.2011.6.112.1.4.1.15	OCTET STRING	read-write	It indicates the digitmap group name.
OCT hwBraCTPConfigIncomingcallChangeName	1.3.6.1.4.1.2011.6.112.1.4.1.16	OCTET STRING	read-write	It indicates the number change of incomging call name.
OCT hwBraCTPConfigOutgoingcallChangeName	1.3.6.1.4.1.2011.6.112.1.4.1.17	OCTET STRING	read-write	It indicates the number change of outgoing call name.
OCT hwBraCTPConfigDefaultCli	1.3.6.1.4.1.2011.6.112.1.4.1.18	OCTET STRING	read-write	It indicates the default cli number of outgoing call.
INT hwBraCTPConfigDefaultCliMode	1.3.6.1.4.1.2011.6.112.1.4.1.19	INTEGER	read-write	Indicates the mode of cli number. Options: 1. match(1) - match 2. overwrite(2) -overwrite 3. null(-1) -invalid value Default: match(1)
INT hwBraCTPConfigBearCapability	1.3.6.1.4.1.2011.6.112.1.4.1.20	INTEGER	read-write	Indicates the bearCapability of bra user. Options: 1. speech(1) -speech 2. audio(2) -3.1k-audio 3. speechOraudio(3) -speech or 3.1k-audio 3. null(-1) -invalid value Default: speechOraudio(3)
INT hwBraCTPConfigCalledPartyNumType	1.3.6.1.4.1.2011.6.112.1.4.1.21	INTEGER	read-write	Indicates the type of called party number. Options: 1. unknown(1) -unknown 2. national(2) -national 3. auto(3) -auto 4. international(4) -international 5. subscriber(5) -subscriber 6. null(-1) -invalid value Default: unknown(1)
INT hwBraCTPConfigCalledPartyNumInternationalPrefixFlag	1.3.6.1.4.1.2011.6.112.1.4.1.22	INTEGER	read-write	Indicates whether to add prefix on international number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2)
INT hwBraCTPConfigCalledPartyNumNationalPrefixFlag	1.3.6.1.4.1.2011.6.112.1.4.1.23	INTEGER	read-write	Indicates whether to add prefix on national number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2)
hwBraCTPOperTable	1.3.6.1.4.1.2011.6.112.1.5		not-accessible	It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature. The index of this table is hwBraCTPOperIndex. Different from the MG PSTN port, a BRA port contains two B channels and occupies two terminal IDs; however, only one terminal ID needs to be configured and this ID must be an even number. Then, the terminal ID in odd is allocated to the BRA port by default. Through this table, you can query the running status of the BRA B1/B2 service, management status of the BRA B1/B2 service, status of the BRA D channel, change time of the running status of the BRA B1/B2 service, and change time of the management status of the BRA B1/B2 service. Through the table, services on the BRA port can be terminated, started, and the service status can be queried.
hwBraCTPOperEntry	1.3.6.1.4.1.2011.6.112.1.5.1		not-accessible	It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature. The index of this entry is hwBraCTPOperIndex. Different from the MG PSTN port, a BRA port contains two B channels and occupies two terminal IDs; however, only one terminal ID needs to be configured and this ID must be an even number. Then, the terminal ID in odd is allocated to the BRA port by default. Through this table, you can query the running status of the BRA B1/B2 service, management status of the BRA B1/B2 service, status of the BRA D channel, change time of the running status of the BRA B1/B2 service, and change time of the management status of the BRA B1/B2 service. Through the table, services on the BRA port can be terminated, started, and the service status can be queried.
I32 hwBraCTPOperIndex	1.3.6.1.4.1.2011.6.112.1.5.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 25 0 0011001 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
INT hwBraCTPB1SrvState	1.3.6.1.4.1.2011.6.112.1.5.1.2	INTEGER	read-only	Indicates the running status of the service layer of the BRA B1 channel. Options: 1. idle(1) -the user is idle 2. busy(2) -the user is busy 3. fault(3) -the port is fault
INT hwBraCTPB2SrvState	1.3.6.1.4.1.2011.6.112.1.5.1.3	INTEGER	read-only	Indicates the running status of the service layer of the BRA B2 channel. Options: 1. idle(1) -the user is idle 2. busy(2) -the user is busy 3. fault(3) -the port is fault
INT hwBraCTPB1AdminState	1.3.6.1.4.1.2011.6.112.1.5.1.4	INTEGER	read-only	Indicates the administration status of the service layer of the BRA B1 channel. Options: 1. blockedLocally(1) -the service is blocked cause of local reason 2. blockedRemotely(2) -the service is blocked cause of remote reason 3. inService(3) -the service is normal 4. shuttingDown(4) -the service is shutting down
INT hwBraCTPB2AdminState	1.3.6.1.4.1.2011.6.112.1.5.1.5	INTEGER	read-only	Indicates the administration status of the service layer of the BRA B2 channel. Options: 1. blockedLocally(1) -the service is blocked cause of local reason 2. blockedRemotely(2) -the service is blocked cause of remote reason 3. inService(3) -the service is normal 4. shuttingDown(4) -the service is shutting down
INT hwBraCTPAdminOper	1.3.6.1.4.1.2011.6.112.1.5.1.6	INTEGER	read-write	Indicates the maintenance operation of the service layer of the BRA port. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully
INT hwBraCTPDState	1.3.6.1.4.1.2011.6.112.1.5.1.7	INTEGER	read-only	Indicates the status of the BRA D channel. Options: 1. established(1) -established 2. block(2) -blocked 3. notConstruct(3) -unestablished 4. teiAlloced(4) -TEI is alloced 5. teiNotAlloced(5) -TEI is not alloced
TIK hwBraCTPB1SrvStateChange	1.3.6.1.4.1.2011.6.112.1.5.1.8	TimeTicks	read-only	Indicates the service running status changing time of the BRA B1 channel.
TIK hwBraCTPB2SrvStateChange	1.3.6.1.4.1.2011.6.112.1.5.1.9	TimeTicks	read-only	Indicates the service running status changing time of the BRA B2 channel.
TIK hwBraCTPB1AdminStateChange	1.3.6.1.4.1.2011.6.112.1.5.1.10	TimeTicks	read-only	Indicates the service administration status changing time of the BRA B1 channel.
TIK hwBraCTPB2AdminStateChange	1.3.6.1.4.1.2011.6.112.1.5.1.11	TimeTicks	read-only	Indicates the service administration status changing time of the BRA B2 channel.
TIK hwBraCTPDStateChange	1.3.6.1.4.1.2011.6.112.1.5.1.12	TimeTicks	read-only	Indicates the status changing time of the BRA D channel.
I32 hwBraCTPMaxCobTime	1.3.6.1.4.1.2011.6.112.1.5.1.13	Integer32	read-write	Indicates the length of waiting timer for bra user defer end service. 0 is not allowed to set. Default:240 Unit: minute
INT hwBraCTPOnexpire	1.3.6.1.4.1.2011.6.112.1.5.1.14	INTEGER	read-write	Indicates the disposal mode when bra user defer end service timeout. Options: 1. force(1) -force user to end service 2. cancel(2) -cancel user's end service Default: force(1)
I32 hwBraCTPAutoResumeTimes	1.3.6.1.4.1.2011.6.112.1.5.1.15	Integer32	read-only	Indicates the auto resume times of bra user.
hwBraCTPStatisticsTable	1.3.6.1.4.1.2011.6.112.1.6		not-accessible	This table is used to query the statistics of the MG-BRA service ports. The index of this table is hwBraCTPStatIndex.
hwBraCTPStatisticsEntry	1.3.6.1.4.1.2011.6.112.1.6.1		not-accessible	This table is used to query the statistics of the MG-BRA service ports. The index of this entry is hwBraCTPStatIndex.
I32 hwBraCTPStatIndex	1.3.6.1.4.1.2011.6.112.1.6.1.1	Integer32	not-accessible	Indicates the frame ID. The GetNext (walk) operation is to collect the statistics of each specified shelf of the system. In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of the entire system; if hwMgPortStatIndex is not all F, the operation is to collect the statistics of the specified shelf.
I32 hwBraCTPStatTotalNum	1.3.6.1.4.1.2011.6.112.1.6.1.2	Integer32	read-only	Indicates the total number of the MGBRA service ports.
I32 hwBraCTPStatFaultNum	1.3.6.1.4.1.2011.6.112.1.6.1.3	Integer32	read-only	Indicates the number of faulty ports.
I32 hwBraCTPStatIdleNum	1.3.6.1.4.1.2011.6.112.1.6.1.4	Integer32	read-only	Indicates the number of idle ports.
I32 hwBraCTPStatBusyNum	1.3.6.1.4.1.2011.6.112.1.6.1.5	Integer32	read-only	Indicates the number of busy ports.
hwPraCTPConfigTable	1.3.6.1.4.1.2011.6.112.1.7		not-accessible	It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature. The index of this table is the hwPraCTPConfigIndex. The attributes of a PRA user with the VoIP feature include the gateway ID, start terminal ID, IUA link group, and interface ID. Through the table, you can configure, modify, and query the above-mentioned attributes of the PRA user.
hwPraCTPConfigEntry	1.3.6.1.4.1.2011.6.112.1.7.1		not-accessible	It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature. The index of this entry is the hwPraCTPConfigIndex. The attributes of a PRA user with the VoIP feature include the gateway ID, start terminal ID, IUA link group, and interface ID. Through the table, you can configure, modify, and query the above-mentioned attributes of the PRA user.
I32 hwPraCTPConfigIndex	1.3.6.1.4.1.2011.6.112.1.7.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 22 0 0010110 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for E1 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwPraCTPMgId	1.3.6.1.4.1.2011.6.112.1.7.1.2	Integer32	read-create	Indicates the MG ID.
OCT hwPraCTPTerminationID	1.3.6.1.4.1.2011.6.112.1.7.1.3	OCTET STRING	read-create	Indicates the start terminal ID (only the character string of digit type is supported).
I32 hwPraCTPLinkSetNo	1.3.6.1.4.1.2011.6.112.1.7.1.4	Integer32	read-create	Indicates the link set to which the PRA terminal belongs (the value range depends on the product specifications).
I32 hwPraCTPIuaIID	1.3.6.1.4.1.2011.6.112.1.7.1.5	Integer32	read-create	Indicates the interface ID of the PRA terminal. -1 means this parameter is not used.
ROW hwPraCTPRowStatus	1.3.6.1.4.1.2011.6.112.1.7.1.6	RowStatus	read-write	Indicates the row status.
INT hwPraCTPLayerFlag	1.3.6.1.4.1.2011.6.112.1.7.1.7	INTEGER	read-only	Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value
INT hwPraCTPPriorityFlag	1.3.6.1.4.1.2011.6.112.1.7.1.8	INTEGER	read-write	Indicates terminal priority. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority Default: cat3(3)
INT hwPraCTPUniErrReport	1.3.6.1.4.1.2011.6.112.1.7.1.9	INTEGER	read-write	Indicates UNI fault report flag of e1 port. Options: 1. disable(1) -disable UNI fault report of e1 port 2. enable(2) -enable UNI fault report of e1 port Default: disable(1)
BIT hwPraCTPSubChnMask	1.3.6.1.4.1.2011.6.112.1.7.1.10	Bits	read-write	Indicates from left to right, each bit indicates enable one sub channel(0-31) or not, 0 means disable, 1 means enable, sub channel 0 and 16 must enable. Default: 11111111111111111111111111111111
OCT hwPraCTPTelNo	1.3.6.1.4.1.2011.6.112.1.7.1.11	OCTET STRING	read-create	Indicates telphone number.
I32 hwPraCTPAutoResumeLimit	1.3.6.1.4.1.2011.6.112.1.7.1.12	Integer32	read-write	Indicates auto resume times threshold of pra user. Default: 20
OCT hwPraCTPIuaTextIID	1.3.6.1.4.1.2011.6.112.1.7.1.13	OCTET STRING	read-create	Use the text to indicate the interface ID of the PRA terminal.
INT hwPraCTPPowerDialerSupport	1.3.6.1.4.1.2011.6.112.1.7.1.14	INTEGER	read-write	Powerdialer support flag of pra user. Options: 1. enable(1) -support power dialer 2. disable(2) -not support power dialer Default: enable(1)
I32 hwPraCTPUserGroupid	1.3.6.1.4.1.2011.6.112.1.7.1.15	Integer32	read-write	It indicates the user group ID. -1 indicates clear the user group info.
OCT hwPraCTPDigitMapGroupName	1.3.6.1.4.1.2011.6.112.1.7.1.16	OCTET STRING	read-write	It indicates the digitmap group name.
OCT hwPraCTPConfigIncomingcallChangeName	1.3.6.1.4.1.2011.6.112.1.7.1.17	OCTET STRING	read-write	It indicates the number change name of incoming call.
OCT hwPraCTPConfigOutgoingcallChangeName	1.3.6.1.4.1.2011.6.112.1.7.1.18	OCTET STRING	read-write	It indicates the number change name of outgoing call.
OCT hwPraCTPConfigDefaultCli	1.3.6.1.4.1.2011.6.112.1.7.1.19	OCTET STRING	read-write	It indicates the default cli number of outgoing call.
INT hwPraCTPConfigDefaultCliMode	1.3.6.1.4.1.2011.6.112.1.7.1.20	INTEGER	read-write	Indicates the mode of cli number. Options: 1. match(1) -match 2. overwrite(2) -overwrite 3. null(0) -invalid value Default: match(1)
INT hwPraCTPConfigBearCapability	1.3.6.1.4.1.2011.6.112.1.7.1.21	INTEGER	read-write	Indicates the bearCapability of pra user. Options: 1. speech(1) -speech 2. audio(2) -3.1k-audio 3. speechOraudio(3) -speech or 3.1k-audio 4. null(0) -invalid value Default: speechOraudio(3)
INT hwPraCTPConfigCalledPartyNumType	1.3.6.1.4.1.2011.6.112.1.7.1.22	INTEGER	read-write	Indicates the type of called party number. Options: 1. unknown(1) -unknown 2. national(2) -national 3. auto(3) -auto 4. international(4) -international 5. subscriber(5) -subscriber 6. null(0) -invalid value Default: unknown(1)
INT hwPraCTPConfigCalledPartyNumInternationalPrefixFlag	1.3.6.1.4.1.2011.6.112.1.7.1.23	INTEGER	read-write	Indicates whether to add prefix on international number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(0) -invalid value Default: disable(2)
INT hwPraCTPConfigCalledPartyNumNationalPrefixFlag	1.3.6.1.4.1.2011.6.112.1.7.1.24	INTEGER	read-write	Indicates whether to add prefix on national number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(0) -invalid value Default: disable(2)
hwPraCTPOperTable	1.3.6.1.4.1.2011.6.112.1.8		not-accessible	It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature. The index of this table is hwPraCTPOperIndex. Through this table, you can query the running status of 32 B channels of the PRA service, management status of 32 B channels of the PRA service, and status of the PRA D channel. Through the table, services on the PRA port can be terminated, started, and the service status can be queried.
hwPraCTPOperEntry	1.3.6.1.4.1.2011.6.112.1.8.1		not-accessible	It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature. The index of this entry is hwPraCTPOperIndex. Through this table, you can query the running status of 32 B channels of the PRA service, management status of 32 B channels of the PRA service, and status of the PRA D channel. Through the table, services on the PRA port can be terminated, started, and the service status can be queried.
I32 hwPraCTPOperIndex	1.3.6.1.4.1.2011.6.112.1.8.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 22 0 0010110 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for E1 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
OCT hwPraCTPBchnSrvState	1.3.6.1.4.1.2011.6.112.1.8.1.2	OCTET STRING	read-only	Indicates the running status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.
OCT hwPraCTPBchnAdminState	1.3.6.1.4.1.2011.6.112.1.8.1.3	OCTET STRING	read-only	Indicates the administration status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-blocked-locally; 2-blocked-remotely; 3-in-service;4-shutting-down.
INT hwPraCTPAdminOper	1.3.6.1.4.1.2011.6.112.1.8.1.4	INTEGER	read-write	Indicates the service operation. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully
INT hwPraCTPDState	1.3.6.1.4.1.2011.6.112.1.8.1.5	INTEGER	read-only	Indicates the status of the PRA D channel. Options: 1. established(1) -established 2. block(2) -blocked 3. notConstruct(3) -unestablished
I32 hwPraCTPMaxCobTime	1.3.6.1.4.1.2011.6.112.1.8.1.6	Integer32	read-write	Indicates length of waiting timer for pra user defer end service. 0 is not allowed to set. Default: 240 Unit: minute
INT hwPraCTPOnexpire	1.3.6.1.4.1.2011.6.112.1.8.1.7	INTEGER	read-write	Indicates disposal mode when pra user defer end service timeout. Options: 1. force(1) -force end service 2. cancel(2) -cancel end service Default: force(1)
I32 hwPraCTPAutoResumeTimes	1.3.6.1.4.1.2011.6.112.1.8.1.8	Integer32	read-only	Indicates auto resume times of pra user.
hwPortStateTraceOperTable	1.3.6.1.4.1.2011.6.112.1.9		not-accessible	It is used to trace port status. The index of this table is hwPortStateTraceFrameId. This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake operations.
hwPortStateTraceOperEntry	1.3.6.1.4.1.2011.6.112.1.9.1		not-accessible	It is used to trace port status. The index of this entry is hwPortStateTraceFrameId. This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake operations.
I32 hwPortStateTraceOperFrameId	1.3.6.1.4.1.2011.6.112.1.9.1.1	Integer32	not-accessible	Indicates the frame ID.
INT hwPortStateTraceOperType	1.3.6.1.4.1.2011.6.112.1.9.1.2	INTEGER	read-write	Indicates the operation type. Options: 1. stop(1) -stop tracing 2. start(2) -start tracing 3. handshake(3) -handshake
I32 hwPortStateTraceOperReportType	1.3.6.1.4.1.2011.6.112.1.9.1.3	Integer32	read-write	Indicates the report type (adopting the bit table): Bit0: indicates to report the running status change of the physical layer. Bit1: indicates to report the administration status change of the physical layer. Bit2: indicates to report the running status change of the service layer. Bit3: indicates to report the administration status change of the service layer.
hwUserDataTrapSequence	1.3.6.1.4.1.2011.6.112.1.10
I32 hwPstnUserDataTrapSequence	1.3.6.1.4.1.2011.6.112.1.10.1	Integer32	read-only	Indicates that the Trap sequence is reported after the PSTN subscriber data changes.
I32 hwBraUserDataChangeSequence	1.3.6.1.4.1.2011.6.112.1.10.2	Integer32	read-only	Indicates that the Trap sequence is reported after the BRA subscriber data changes.
I32 hwPraUserDataChangeSequence	1.3.6.1.4.1.2011.6.112.1.10.3	Integer32	read-only	Indicates that the Trap sequence is reported after the PRA subscriber data changes.
I32 hwR2UserDataChangeSequence	1.3.6.1.4.1.2011.6.112.1.10.4	Integer32	read-only	Indicates that the Trap sequence is reported after the R2 subscriber data changes.
hwPmbsCTPConfigTable	1.3.6.1.4.1.2011.6.112.1.11		not-accessible	This table is used to config PMBS user. The index of this table is hwPmbsCTPConfigIndex.
hwPmbsCTPConfigEntry	1.3.6.1.4.1.2011.6.112.1.11.1		not-accessible	This table is used to config PMBS user. The index of this entry is hwPmbsCTPConfigIndex.
I32 hwPmbsCTPConfigIndex	1.3.6.1.4.1.2011.6.112.1.11.1.1	Integer32	not-accessible	Indicates the frame/slot/port. The PMBS user must be configurated on BRA port. 25 0 0011001 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwPmbsCTPLinkSetNo	1.3.6.1.4.1.2011.6.112.1.11.1.2	Integer32	read-create	IUA LinkSetNo.
I32 hwPmbsCTPluaIID	1.3.6.1.4.1.2011.6.112.1.11.1.3	Integer32	read-write	IUA Interface ID.
ROW hwPmbsCTPRowStatus	1.3.6.1.4.1.2011.6.112.1.11.1.4	RowStatus	read-write	Row status.
OCT hwPmbsCTPIuaTextIID	1.3.6.1.4.1.2011.6.112.1.11.1.5	OCTET STRING	read-create	Use the text to indicate the interface ID of the PMBS terminal.
hwPmbsCTPOperTable	1.3.6.1.4.1.2011.6.112.1.12		not-accessible	This table is used to operate the PMBS user. The index of this table is hwPmbsCTPOperIndex.
hwPmbsCTPOperEntry	1.3.6.1.4.1.2011.6.112.1.12.1		not-accessible	This table is used to operate the PMBS user. The index of this entry is hwPmbsCTPOperIndex.
I32 hwPmbsCTPOperIndex	1.3.6.1.4.1.2011.6.112.1.12.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 25 0 0011001 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
BIT hwPmbsCTPPLinkState	1.3.6.1.4.1.2011.6.112.1.12.1.2	Bits	read-only	Indicates from left to right, each bit indicates plink status of one TEI(0-62) or not, 0 means plink not established, 1 means plink established.
hwPstnCTPRightConfigTable	1.3.6.1.4.1.2011.6.112.1.13		not-accessible	This table is used to config PSTN user's right and servicedata. The indexes of this table are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
hwPstnCTPRightConfigEntry	1.3.6.1.4.1.2011.6.112.1.13.1		not-accessible	This table is used to config PSTN user's right and servicedata. The indexes of this entry are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
I32 hwPstnCTPRightConfigIndex	1.3.6.1.4.1.2011.6.112.1.13.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 31 0 0011000 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for PSTN port, must be 0x18 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwPstnCTPRightPortBindIndex	1.3.6.1.4.1.2011.6.112.1.13.1.2	Integer32	not-accessible	Indicates the telephone number index.
INT hwPstnCTPRightCallHold	1.3.6.1.4.1.2011.6.112.1.13.1.3	INTEGER	read-write	Indicates the right flag of callhold. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightThreeParty	1.3.6.1.4.1.2011.6.112.1.13.1.4	INTEGER	read-write	Indicates the right flag of three-party. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightConf	1.3.6.1.4.1.2011.6.112.1.13.1.5	INTEGER	read-write	Indicates the right flag of conf. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightCt	1.3.6.1.4.1.2011.6.112.1.13.1.6	INTEGER	read-write	Indicates the right flag of ct. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightCw	1.3.6.1.4.1.2011.6.112.1.13.1.7	INTEGER	read-write	Indicates the right flag of cw. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightMcid	1.3.6.1.4.1.2011.6.112.1.13.1.8	INTEGER	read-write	Indicates the right flag of mcid. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightMwi	1.3.6.1.4.1.2011.6.112.1.13.1.9	INTEGER	read-write	Indicates the right flag of mwi. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightTp	1.3.6.1.4.1.2011.6.112.1.13.1.10	INTEGER	read-write	Indicates the right flag of tp. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightCd	1.3.6.1.4.1.2011.6.112.1.13.1.11	INTEGER	read-write	Indicates the right flag of cd. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightUus1	1.3.6.1.4.1.2011.6.112.1.13.1.12	INTEGER	read-write	Indicates the right flag of uus1. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightUus2	1.3.6.1.4.1.2011.6.112.1.13.1.13	INTEGER	read-write	Indicates the right flag of uus2. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightUus3	1.3.6.1.4.1.2011.6.112.1.13.1.14	INTEGER	read-write	Indicates the right flag of uus3. Options: 1. disable(1) -disable 2. enable(2) -enable
U32 hwPstnCTPRightCentrexNo	1.3.6.1.4.1.2011.6.112.1.13.1.15	Unsigned32	read-write	It is used to set centrex NO. of SipPstnUser, 4294967295 means to clear the configuration.
OCT hwPstnCTPRightCentrexPrefix	1.3.6.1.4.1.2011.6.112.1.13.1.16	OCTET STRING	read-write	Indicates the CentrexPrefix of SipPstnUser.
INT hwPstnCTPRightCentrexFlag	1.3.6.1.4.1.2011.6.112.1.13.1.17	INTEGER	read-write	Indicates the CentrexFlag of SipPstnUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary
INT hwPstnCTPRightMwiMode	1.3.6.1.4.1.2011.6.112.1.13.1.18	INTEGER	read-write	Indicates the MwiMode of SipPstnUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine
I32 hwPstnCTPRightHotTime	1.3.6.1.4.1.2011.6.112.1.13.1.19	Integer32	read-write	Indicates the HotTime of SipPstnUser. Unit: second
OCT hwPstnCTPRightHotLineNum	1.3.6.1.4.1.2011.6.112.1.13.1.20	OCTET STRING	read-write	Indicates the HotLineNum of SipPstnUser, the length of hotlinenum mustn't exceed 64.
INT hwPstnCTPRightDialTone	1.3.6.1.4.1.2011.6.112.1.13.1.21	INTEGER	read-write	Indicates the DialTone of SipPstnUser. Options: 1. normal(1) -normal tone 2. special(2) -special tone 3. mw(3) -message waiting tone 4. stutter(4) -stutter tone
OCT hwPstnCTPRightCfbNum	1.3.6.1.4.1.2011.6.112.1.13.1.22	OCTET STRING	read-write	Indicates the CfbNum of SipPstnUser.
OCT hwPstnCTPRightCfnrNum	1.3.6.1.4.1.2011.6.112.1.13.1.23	OCTET STRING	read-write	Indicates the CfnrNum of SipPstnUser.
OCT hwPstnCTPRightCfuNum	1.3.6.1.4.1.2011.6.112.1.13.1.24	OCTET STRING	read-write	Indicates the CfuNum of SipPstnUser.
I32 hwPstnCTPRightCfnrTime	1.3.6.1.4.1.2011.6.112.1.13.1.25	Integer32	read-write	Indicates the CfnrTime of SipPstnUser. Unit: second
INT hwPstnCTPRightAnonymousCall	1.3.6.1.4.1.2011.6.112.1.13.1.26	INTEGER	read-write	Indicates the right flag of anonymous-call. Options: 1. disable(1) -disable anonymous-call 2. enable(2) -enable anonymous-call
OCT hwPstnCTPRightAuthName	1.3.6.1.4.1.2011.6.112.1.13.1.27	OCTET STRING	read-write	Indicates the authorization username of sippstnuser. The character set is unrestricted.
OCT hwPstnCTPRightAuthPassword	1.3.6.1.4.1.2011.6.112.1.13.1.28	OCTET STRING	read-write	Indicates the authorization password of sippstnuser. The character set is unrestricted.
I32 hwPstnCTPRightEndConfigIndex	1.3.6.1.4.1.2011.6.112.1.13.1.29	Integer32	read-write	Indicates the end shelf/slot/port.
INT hwPstnCTPRightAuthPasswordMode	1.3.6.1.4.1.2011.6.112.1.13.1.30	INTEGER	read-write	Indicates the authorization mode of the password for sippstnuser. Options: 1. password(1) -authorized by password 2. ha1(2) --authorized by ha1
OCT hwPstnCTPRightAuthHA1	1.3.6.1.4.1.2011.6.112.1.13.1.31	OCTET STRING	read-write	Indicates the authorization HA1 value of sippstnuser. The character set is unrestricted.
INT hwPstnCTPRightAutoReversePolarity	1.3.6.1.4.1.2011.6.112.1.13.1.32	INTEGER	read-write	Indicates the right flag of auto reverse polarity. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightDisplayNameMode	1.3.6.1.4.1.2011.6.112.1.13.1.33	INTEGER	read-write	Indicates the right flag of display name mode. Options: 1. disable(1) -disable 2. enable(2) -enable
OCT hwPstnCTPRightDisplayName	1.3.6.1.4.1.2011.6.112.1.13.1.34	OCTET STRING	read-write	Indicates the display name string.
INT hwPstnCTPRightHotLine	1.3.6.1.4.1.2011.6.112.1.13.1.35	INTEGER	read-write	Indicates the right flag of hotline. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightPermanentHold	1.3.6.1.4.1.2011.6.112.1.13.1.36	INTEGER	read-write	Indicates the right flag of permanent-hold. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightCutoffDisconnect	1.3.6.1.4.1.2011.6.112.1.13.1.37	INTEGER	read-write	Indicates the right flag of cutoff-disconnect. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightSccClass	1.3.6.1.4.1.2011.6.112.1.13.1.38	INTEGER	read-write	Indicates the right flag of SCC class service, for example call-park, call-pickup, EBO. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightPermanentHoldMode	1.3.6.1.4.1.2011.6.112.1.13.1.39	INTEGER	read-write	Indicates the PermanentHoldMode of SipPstnUser. Options: 1. norecall(1) - no recall 2. reminder(2) -reminder 3. recall(3) -recall
I32 hwPstnCTPRightPermanentHoldTime	1.3.6.1.4.1.2011.6.112.1.13.1.40	Integer32	read-write	Indicates the PermanentHoldTime of SipPstnUser. Unit: second
INT hwPstnCTPRightFastDisconnect	1.3.6.1.4.1.2011.6.112.1.13.1.41	INTEGER	read-write	Indicates the right flag of fast-disconnect. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwPstnCTPRightDc	1.3.6.1.4.1.2011.6.112.1.13.1.42	INTEGER	read-write	Indicates the right flag of dual communication. Options: 1. disable(1) -disable 2. enable(2) -enable
hwCTPExternNumberConfigTable	1.3.6.1.4.1.2011.6.112.1.14		not-accessible	This table is used to config extern number of the PSTN or ISDN user. The indexes of this table are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
hwCTPExternNumberConfigEntry	1.3.6.1.4.1.2011.6.112.1.14.1		not-accessible	This table is used to config extern number of the PSTN or ISDN user. The indexes of this entry are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
I32 hwCTPExternNumberConfigIndex	1.3.6.1.4.1.2011.6.112.1.14.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 31 0 xxxxxxx \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwCTPExternNumberPortBindIndex	1.3.6.1.4.1.2011.6.112.1.14.1.2	Integer32	not-accessible	Indicates the extend number index. If the value equal -1, then return the idle index of this shelf/slot/port.
OCT hwCTPExternNumber	1.3.6.1.4.1.2011.6.112.1.14.1.3	OCTET STRING	read-write	Indicates the extend number. - means to delete this extern number.
ROW hwCTPExternRowStatus	1.3.6.1.4.1.2011.6.112.1.14.1.4	RowStatus	read-write	RowStatus
I32 hwCTPExternUserGroupid	1.3.6.1.4.1.2011.6.112.1.14.1.5	Integer32	read-write	It indicates the user group ID. -1 indicates clear the user group info.
hwBraCTPRightConfigTable	1.3.6.1.4.1.2011.6.112.1.15		not-accessible	This table is used to config BRA user's right and servicedata. The indexes of this table are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
hwBraCTPRightConfigEntry	1.3.6.1.4.1.2011.6.112.1.15.1		not-accessible	This table is used to config BRA user's right and servicedata. The indexes of this entry are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
I32 hwBraCTPRightConfigIndex	1.3.6.1.4.1.2011.6.112.1.15.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 31 0 0011001 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwBraCTPRightPortBindIndex	1.3.6.1.4.1.2011.6.112.1.15.1.2	Integer32	not-accessible	Indicates the telephone number index.
OCT hwBraCTPRightAuthName	1.3.6.1.4.1.2011.6.112.1.15.1.3	OCTET STRING	read-write	Indicates the authorization username of sipbrauser. The character set is unrestricted.
OCT hwBraCTPRightAuthPassword	1.3.6.1.4.1.2011.6.112.1.15.1.4	OCTET STRING	read-write	Indicates the authorization password of sipbrauser. The character set is unrestricted.
I32 hwBraCTPRightEndConfigIndex	1.3.6.1.4.1.2011.6.112.1.15.1.5	Integer32	read-write	Indicates the end shelf/slot/port.
INT hwBraCTPRightAuthPasswordMode	1.3.6.1.4.1.2011.6.112.1.15.1.6	INTEGER	read-write	Indicates the authorization mode of the password for sipbrauser. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1
OCT hwBraCTPRightAuthHA1	1.3.6.1.4.1.2011.6.112.1.15.1.7	OCTET STRING	read-write	Indicates the authorization HA1 value of sipbrauser. The character set is unrestricted.
U32 hwBraCTPRightCentrexNo	1.3.6.1.4.1.2011.6.112.1.15.1.8	Unsigned32	read-write	It is used to set centrex NO. of SipBraUser, 4294967295 means to clear the configuration.
OCT hwBraCTPRightCentrexPrefix	1.3.6.1.4.1.2011.6.112.1.15.1.9	OCTET STRING	read-write	Indicates the CentrexPrefix of SipBraUser.
INT hwBraCTPRightCentrexFlag	1.3.6.1.4.1.2011.6.112.1.15.1.10	INTEGER	read-write	Indicates the CentrexFlag of SipBraUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary
INT hwBraCTPRightMwiMode	1.3.6.1.4.1.2011.6.112.1.15.1.11	INTEGER	read-write	Indicates the MwiMode of SipBraUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine
INT hwBraCTPRightCallHold	1.3.6.1.4.1.2011.6.112.1.15.1.12	INTEGER	read-write	Indicates the right flag of callhold. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwBraCTPRightThreeParty	1.3.6.1.4.1.2011.6.112.1.15.1.13	INTEGER	read-write	Indicates the right flag of three-party. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwBraCTPRightConf	1.3.6.1.4.1.2011.6.112.1.15.1.14	INTEGER	read-write	Indicates the right flag of conf. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwBraCTPRightCt	1.3.6.1.4.1.2011.6.112.1.15.1.15	INTEGER	read-write	Indicates the right flag of ct. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwBraCTPRightCw	1.3.6.1.4.1.2011.6.112.1.15.1.16	INTEGER	read-write	Indicates the right flag of cw. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwBraCTPRightMcid	1.3.6.1.4.1.2011.6.112.1.15.1.17	INTEGER	read-write	Indicates the right flag of mcid. Options: 1. disable(1) -disable 2. enable(2) -enable
INT hwBraCTPRightMwi	1.3.6.1.4.1.2011.6.112.1.15.1.18	INTEGER	read-write	Indicates the right flag of mwi. Options: 1. disable(1) -disable 2. enable(2) -enable
hwPraCTPRightConfigTable	1.3.6.1.4.1.2011.6.112.1.16		not-accessible	This table is used to config PRA user's servicedata. The indexes of this table are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
hwPraCTPRightConfigEntry	1.3.6.1.4.1.2011.6.112.1.16.1		not-accessible	This table is used to config PRA user's servicedata. The indexes of this entry are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
I32 hwPraCTPRightConfigIndex	1.3.6.1.4.1.2011.6.112.1.16.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 31 0 0010110 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for E1 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwPraCTPRightPortBindIndex	1.3.6.1.4.1.2011.6.112.1.16.1.2	Integer32	not-accessible	Indicates the telephone number index.
OCT hwPraCTPRightAuthName	1.3.6.1.4.1.2011.6.112.1.16.1.3	OCTET STRING	read-write	Indicates the authorization username of sipprauser. The character set is unrestricted.
OCT hwPraCTPRightAuthPassword	1.3.6.1.4.1.2011.6.112.1.16.1.4	OCTET STRING	read-write	Indicates the authorization password of sipprauser. The character set is unrestricted.
I32 hwPraCTPRightEndConfigIndex	1.3.6.1.4.1.2011.6.112.1.16.1.5	Integer32	read-write	Indicates the end shelf/slot/port.
INT hwPraCTPRightAuthPasswordMode	1.3.6.1.4.1.2011.6.112.1.16.1.6	INTEGER	read-write	Indicates the authorization mode of the password for sipprauser. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1
OCT hwPraCTPRightAuthHA1	1.3.6.1.4.1.2011.6.112.1.16.1.7	OCTET STRING	read-write	Indicates the authorization HA1 value of sipprauser. The character set is unrestricted.
U32 hwPraCTPRightCentrexNo	1.3.6.1.4.1.2011.6.112.1.16.1.8	Unsigned32	read-write	It is used to set centrex NO. of SipPraUser, 4294967295 means to clear the configuration.
OCT hwPraCTPRightCentrexPrefix	1.3.6.1.4.1.2011.6.112.1.16.1.9	OCTET STRING	read-write	Indicates the CentrexPrefix of SipPraUser.
INT hwPraCTPRightCentrexFlag	1.3.6.1.4.1.2011.6.112.1.16.1.10	INTEGER	read-write	Indicates the CentrexFlag of SipPraUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary
INT hwPraCTPRightMwiMode	1.3.6.1.4.1.2011.6.112.1.16.1.11	INTEGER	read-write	Indicates the MwiMode of SipPraUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine
hwR2CTPConfigTable	1.3.6.1.4.1.2011.6.112.1.17		not-accessible	It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature. The index of this table is the hwR2CTPConfigIndex. The attributes of a R2 user with the VoIP feature include the gateway ID, terminal ID, R2 profile index. Through the table, you can configure, modify, and query the above-mentioned attributes of the R2 user.
hwR2CTPConfigEntry	1.3.6.1.4.1.2011.6.112.1.17.1		not-accessible	It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature. The index of this entry is the hwR2CTPConfigIndex. The attributes of a R2 user with the VoIP feature include the gateway ID, terminal ID, R2 profile index. Through the table, you can configure, modify, and query the above-mentioned attributes of the R2 user.
I32 hwR2CTPConfigIndex	1.3.6.1.4.1.2011.6.112.1.17.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 31 0 0010110 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for R2 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwR2CTPMgId	1.3.6.1.4.1.2011.6.112.1.17.1.2	Integer32	read-create	Indicates the MG ID.
OCT hwR2CTPTerminationID	1.3.6.1.4.1.2011.6.112.1.17.1.3	OCTET STRING	read-create	Indicates the start terminal ID (only the character string of digit type is supported).
I32 hwR2CTPSignalProfileIndex	1.3.6.1.4.1.2011.6.112.1.17.1.4	Integer32	read-write	Indicates the R2 signal profile index.
OCT hwR2CTPSignalProfileName	1.3.6.1.4.1.2011.6.112.1.17.1.5	OCTET STRING	read-only	Indicates the R2 signal profile name.
ROW hwR2CTPRowStatus	1.3.6.1.4.1.2011.6.112.1.17.1.6	RowStatus	read-write	Indicates the row status.
INT hwR2CTPPriorityFlag	1.3.6.1.4.1.2011.6.112.1.17.1.7	INTEGER	read-write	Indicates terminal priority. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority
OCT hwR2CTPTelNo	1.3.6.1.4.1.2011.6.112.1.17.1.8	OCTET STRING	read-create	Indicates telphone number.
I32 hwR2CTPUserGroupid	1.3.6.1.4.1.2011.6.112.1.17.1.9	Integer32	read-write	It indicates the user group ID. -1 indicates clear the user group info.
OCT hwR2CTPDigitMapGroupName	1.3.6.1.4.1.2011.6.112.1.17.1.10	OCTET STRING	read-write	It indicates the digitmap group name.
INT hwR2CTPRemoteRingFlag	1.3.6.1.4.1.2011.6.112.1.17.1.11	INTEGER	read-write	Indicates RemoteRing. Options: 1. disable(1) -disable receive remote early media 2. enable(2) -enable receive remote early media 3. null(-1) -invalid value
OCT hwR2CTPConfigIncomingcallChangeName	1.3.6.1.4.1.2011.6.112.1.17.1.12	OCTET STRING	read-write	It indicates the number change name of incoming call.
OCT hwR2CTPConfigOutgoingcallChangeName	1.3.6.1.4.1.2011.6.112.1.17.1.13	OCTET STRING	read-write	It indicates the number change name of outgoing call.
hwR2CTPOperTable	1.3.6.1.4.1.2011.6.112.1.18		not-accessible	It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature. The index of this table is hwR2CTPOperIndex. Through this table, you can query the running status of 32 B channels of the R2 service, and management status of 32 B channels of the R2 service. Through the table, services on the R2 port can be terminated, started, and the service status can be queried.
hwR2CTPOperEntry	1.3.6.1.4.1.2011.6.112.1.18.1		not-accessible	It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature. The index of this entry is hwR2CTPOperIndex. Through this table, you can query the running status of 32 B channels of the R2 service, and management status of 32 B channels of the R2 service. Through the table, services on the R2 port can be terminated, started, and the service status can be queried.
I32 hwR2CTPOperIndex	1.3.6.1.4.1.2011.6.112.1.18.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 31 0 0010110 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for R2 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
OCT hwR2CTPBchnSrvState	1.3.6.1.4.1.2011.6.112.1.18.1.2	OCTET STRING	read-only	Indicates the running status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.
OCT hwR2CTPBchnAdminState	1.3.6.1.4.1.2011.6.112.1.18.1.3	OCTET STRING	read-only	Indicates the administration status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows: 1-blocked-locally; 2-blocked-remotely; 3-in-service;4-shutting-down;5-MGCblock;6-PBXblock;7-bothblock.
INT hwR2CTPAdminOper	1.3.6.1.4.1.2011.6.112.1.18.1.4	INTEGER	read-write	Indicates the service operation. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully
I32 hwR2CTPMaxCobTime	1.3.6.1.4.1.2011.6.112.1.18.1.5	Integer32	read-write	Indicates length of waiting timer for R2 user defer end service. 0 is not allowed to set. Default: 240 Unit: minute
INT hwR2CTPOnexpire	1.3.6.1.4.1.2011.6.112.1.18.1.6	INTEGER	read-write	Indicates disposal mode when R2 user defer end service timeout. Options: 1. force(1) -force end service 2. cancel(2) -cancel end service Default: force(1)
hwR2CTPRightConfigTable	1.3.6.1.4.1.2011.6.112.1.19		not-accessible	This table is used to config R2 user's right. The indexes of this table are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
hwR2CTPRightConfigEntry	1.3.6.1.4.1.2011.6.112.1.19.1		not-accessible	This table is used to config R2 user's right. The indexes of this entry are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
I32 hwR2CTPRightConfigIndex	1.3.6.1.4.1.2011.6.112.1.19.1.1	Integer32	not-accessible	Indicates the frame/slot/port. 31 0 0011000 \| xxxxxxxx \| xxxxxx \| xxxxxxx \| 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for PSTN port, must be 0x18 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
I32 hwR2CTPRightPortBindIndex	1.3.6.1.4.1.2011.6.112.1.19.1.2	Integer32	not-accessible	Indicates the telephone number index.
OCT hwR2CTPRightAuthName	1.3.6.1.4.1.2011.6.112.1.19.1.3	OCTET STRING	read-write	Indicates the authorization username of sipR2user. The character set is unrestricted.
OCT hwR2CTPRightAuthPassword	1.3.6.1.4.1.2011.6.112.1.19.1.4	OCTET STRING	read-write	Indicates the authorization password of sipR2user. The character set is unrestricted.
INT hwR2CTPRightAuthPasswordMode	1.3.6.1.4.1.2011.6.112.1.19.1.5	INTEGER	read-write	Indicates the authorization mode of the password for sipR2user. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1
OCT hwR2CTPRightAuthHA1	1.3.6.1.4.1.2011.6.112.1.19.1.6	OCTET STRING	read-write	Indicates the authorization HA1 value of sipR2user. The character set is unrestricted.
hwIASVoiceUserTrapsVbOids	1.3.6.1.4.1.2011.6.112.2
I32 hwLightTrapPortNum	1.3.6.1.4.1.2011.6.112.2.1	Integer32	accessible-for-notify	The number of the ports send light state trap.
OCT hwLightTrapPortInfo	1.3.6.1.4.1.2011.6.112.2.2	OCTET STRING	accessible-for-notify	The position and state of the ports.
I32 hwVoiceUserFrame	1.3.6.1.4.1.2011.6.112.2.3	Integer32	accessible-for-notify	Indicate the frame that user is configed at. -1 indicate invalid value.
I32 hwVoiceUserSlot	1.3.6.1.4.1.2011.6.112.2.4	Integer32	accessible-for-notify	Indicate the slot that user is configed at. -1 indicate invalid value.
I32 hwVoiceUserPort	1.3.6.1.4.1.2011.6.112.2.5	Integer32	accessible-for-notify	Indicate the port that user is configed at. -1 indicate invalid value.
INT hwVoiceUserOperateType	1.3.6.1.4.1.2011.6.112.2.6	INTEGER	accessible-for-notify	Indicate the port that user operate type. Options: 1. user-data-add(1) -add user data 2. user-data-delete(2) -delete user data 3. user-data-modify(3) -modify user data
I32 hwVoiceUserPortNum	1.3.6.1.4.1.2011.6.112.2.7	Integer32	accessible-for-notify	The number of the ports send by user config change trap.
I32 hwVoiceUserTsn	1.3.6.1.4.1.2011.6.112.2.8	Integer32	accessible-for-notify	Indicate the time slot ID that user is configed at. -1 indicate invalid value.
hwIASVoiceUserTraps	1.3.6.1.4.1.2011.6.112.3
hwIASVoiceUserCommonTraps	1.3.6.1.4.1.2011.6.112.3.1
hwIASVoiceUserPortTraps	1.3.6.1.4.1.2011.6.112.3.1.1
NTF hwIASVoiceUserPortLightTrap	1.3.6.1.4.1.2011.6.112.3.1.1.0.1			This notification indicates that reset result of the SIP media gateway.
NTF hwIASVoiceUserPortPstnDataChangeTrap	1.3.6.1.4.1.2011.6.112.3.1.1.0.2			This notification indicates that data of pstn user have been changed.
NTF hwIASVoiceUserPortBraDataChangeTrap	1.3.6.1.4.1.2011.6.112.3.1.1.0.3			This notification indicates that data of bra user have been changed.
NTF hwIASVoiceUserPortPraDataChangeTrap	1.3.6.1.4.1.2011.6.112.3.1.1.0.4			This notification indicates that data of pra user have been changed.
NTF hwIASVoiceUserPortPmbsDataChangeTrap	1.3.6.1.4.1.2011.6.112.3.1.1.0.5			This notification indicates that data of pmbs user have been changed.
NTF hwIASVoiceUserPortR2DataChangeTrap	1.3.6.1.4.1.2011.6.112.3.1.1.0.6			This notification indicates that data of R2 user have been changed.
hwIASVoiceUserAlarmTraps	1.3.6.1.4.1.2011.6.112.3.2
hwIASVoiceUserPortAlarmTraps	1.3.6.1.4.1.2011.6.112.3.2.1
NTF hwIASVoiceUserRemoteBlockTrap	1.3.6.1.4.1.2011.6.112.3.2.1.0.1			This notification indicates that the user is remote blocked.
NTF hwIASVoiceUserUnblockTrap	1.3.6.1.4.1.2011.6.112.3.2.1.0.2			This notification indicates that the user is unblocked.
NTF hwIASVoiceUserlockedTrap	1.3.6.1.4.1.2011.6.112.3.2.1.0.3			This notification indicates that the user is locked.
NTF hwIASVoiceUserUnlockedTrap	1.3.6.1.4.1.2011.6.112.3.2.1.0.4			This notification indicates that the user is unlocked.
hwIASVoiceUserTsnAlarmTraps	1.3.6.1.4.1.2011.6.112.3.2.2
NTF hwIASVoiceUserTsnBlockTrap	1.3.6.1.4.1.2011.6.112.3.2.2.0.1			This notification indicates that the user time slot is blocked.
NTF hwIASVoiceUserTsnUnBlockTrap	1.3.6.1.4.1.2011.6.112.3.2.2.0.2			This notification indicates that the user time slot is unblocked.

RFC description

Manages voice user configuration including circuit connection points for PSTN, BRA, and R2 protocols on Huawei systems.

Start monitoring Huawei VoIP Integrated Access Device (IAD) / voice gateway (subscriber accounts) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-VOICEUSER-MIB

What Is HUAWEI-VOICEUSER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description