All MIBs › HUAWEI-ENT-VOICE-SIPAGUSER-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2011--0-5-
Category: Domain: VoIP/Telephony, Vendor: Huawei
Description: Huawei enterprise voice SIP agent user MIB providing per-user SIP registration, authentication, and call status management objects.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-ENT-VOICE-SIPAGUSER-MIB?
HUAWEI-ENT-VOICE-SIPAGUSER-MIB is a Huawei private MIB for enterprise voice gateway devices, providing per-user SIP agent user management objects covering registration, authentication, and call status. It exposes data about each configured SIP user/extension's registration state with the SIP server and relevant authentication parameters. Its monitoring value is in tracking the software-level health of the voice service: whether individual SIP users are currently registered, authenticated, and able to place/receive calls, which helps diagnose VoIP service issues at the per-extension level. It depends on underlying SIP protocol concepts and likely on other Huawei voice-gateway MIBs for trunk/line-level status. It is deployed on Huawei enterprise voice gateways or IP-PBX-style access devices handling SIP-based telephony for business users. Network engineers evaluating or troubleshooting this functionality can download the HUAWEI-ENT-VOICE-SIPAGUSER-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-ENT-VOICE-SIPAGUSER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei enterprise voice gateways / SIP access devices
Monitoring Examples
A voice administrator would poll the SIP user table to check whether a specific extension's registration status is registered versus unregistered, and inspect the authentication status object to rule out credential problems. If a batch of users suddenly shows unregistered status, that likely indicates a SIP registrar/proxy connectivity failure rather than isolated handset issues. This lets IT staff distinguish between a gateway-wide outage and a single misbehaving endpoint.
What Can Be Monitored
- per-user SIP registration status
- SIP authentication status
- per-user call status
- SIP agent user configuration
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| private |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwEntVoiceSipagUserMIB | 1.3.6.1.4.1.2011.5.25.251 | This MIB module defines MIB objects which provides voice user management. | ||
| hwEntPstnUserConfigTable | 1.3.6.1.4.1.2011.5.25.251.1 | not-accessible | This table is used to add, delete, modify, and query the PSTN user. The index of this table is hwEntPraUserName. | |
| hwEntPstnUserConfigEntry | 1.3.6.1.4.1.2011.5.25.251.1.1 | not-accessible | This table is used to add, delete, modify, and query the PSTN user. The index of this entry is hwEntPstnUserName. | |
| STR hwEntPstnUserName | 1.3.6.1.4.1.2011.5.25.251.1.1.1 | DisplayString | not-accessible | Indicates the user's name. |
| I32 hwEntPstnUserPort | 1.3.6.1.4.1.2011.5.25.251.1.1.2 | Integer32 | read-create | Indicates the user's port. Bits 31-30 (2 bits): reserved. Bits 29-20 (10 bits): slot index. Bits 19-10 (10 bits): subcard index. Bits 9-0 (10 bits): port index. |
| I32 hwEntPstnUserMgId | 1.3.6.1.4.1.2011.5.25.251.1.1.3 | Integer32 | read-create | Indicates the sipag ID. |
| STR hwEntPstnUserTelNo | 1.3.6.1.4.1.2011.5.25.251.1.1.4 | DisplayString | read-create | Indicates the user's telephone number. |
| I32 hwEntPstnUserUserGroupId | 1.3.6.1.4.1.2011.5.25.251.1.1.5 | Integer32 | read-create | Indicates the user's group id. |
| ROW hwEntPstnUserRowStatus | 1.3.6.1.4.1.2011.5.25.251.1.1.6 | RowStatus | read-create | Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6) |
| INT hwEntPstnUserPriority | 1.3.6.1.4.1.2011.5.25.251.1.1.7 | INTEGER | read-create | Indicates the priority of the terminal. Options: cat1(1) -the highest priority cat2(2) -the middle priority cat3(3) -the lowest priority Default: cat3(3) |
| INT hwEntPstnUserPotsLineType | 1.3.6.1.4.1.2011.5.25.251.1.1.8 | INTEGER | read-create | Indicates the pots line type. Options: del(1) -DEL lcPBX(2) -Loop Calling PBX ecPBX(3) -Earth Calling PBX payPhone(4) -PayPhone Default: del(1) |
| I32 hwEntPstnUserDCTime | 1.3.6.1.4.1.2011.5.25.251.1.1.9 | Integer32 | read-create | Indicates the power-off interval. Default: 10 Unit: 10ms |
| I32 hwEntPstnUserFSKDelayInterval | 1.3.6.1.4.1.2011.5.25.251.1.1.10 | Integer32 | read-create | Indicates the FSK delay interval. Default: 80 Unit: 10ms |
| INT hwEntPstnUserCidTransSequence | 1.3.6.1.4.1.2011.5.25.251.1.1.11 | INTEGER | read-create | Indicates the time for delivering the caller ID. Options: afterRing(1) -transmit CID after ringing beforeRing(2) -transmit CID before ringing Default: afterRing(1) |
| INT hwEntPstnUserCidFormat | 1.3.6.1.4.1.2011.5.25.251.1.1.12 | INTEGER | read-create | Indicates the format of the caller ID. Options: 1. sdmfFsk(1) -SDMF FSK format 2. mdmfFsk(2) -MDMF FSK format 3. dtmf(3) -DTMF format 4. r15(4) -R15 format 5. etsi(5) -ETSI format Default: sdmfFsk(1) |
| INT hwEntPstnUserVQEAgc | 1.3.6.1.4.1.2011.5.25.251.1.1.13 | INTEGER | read-create | Indicates enable AGC or not. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntPstnUserVQESns | 1.3.6.1.4.1.2011.5.25.251.1.1.14 | INTEGER | read-create | Indicates enable SNS or not. Options: 1. enable(1) 2. disable(2) Default: disable(2) |
| I32 hwEntPstnUserVQEAgcLevel | 1.3.6.1.4.1.2011.5.25.251.1.1.15 | Integer32 | read-create | Indicates set AGC target value. 0..15 corresponding to -9..-24dbm0. Default: 13(-22dbm0) |
| I32 hwEntPstnUserVQESnsLevel | 1.3.6.1.4.1.2011.5.25.251.1.1.16 | Integer32 | read-create | Indicates set VQE noise suppression level. Default: 12 Unit: db |
| I32 hwEntPstnUserDspInputGain | 1.3.6.1.4.1.2011.5.25.251.1.1.17 | Integer32 | read-create | Indicates Dsp input gain. 0..15 corresponding to -10..5db. Default: 10(0db) |
| I32 hwEntPstnUserDspOutputGain | 1.3.6.1.4.1.2011.5.25.251.1.1.18 | Integer32 | read-create | Indicates Dsp output gain. 0..20 corresponding to -10..10db. Default: 10(0db) |
| INT hwEntPstnUserDetectANSbarBySingleTone | 1.3.6.1.4.1.2011.5.25.251.1.1.19 | INTEGER | read-create | Indicates the flag of ANSbar signal detected by SingleTone. Options: 1. enable(1) -the ANSbar signal detected by SingleTone is supported 2. disable(2) -the ANSbar signal detected by SingleTone is not supported Default: disable(2) |
| INT hwEntPstnUserBellANS | 1.3.6.1.4.1.2011.5.25.251.1.1.20 | INTEGER | read-create | Indicates the flag of Bell ANS. Options: 1. enable(1) -the Bell ANS is supported 2. disable(2) -the Bell ANS is not supported Default: disable(2) |
| STR hwEntPstnUserDspParaTemplate | 1.3.6.1.4.1.2011.5.25.251.1.1.21 | DisplayString | read-create | Indicates the index of dsp parameter template name. |
| INT hwEntPstnUserCidFskMode | 1.3.6.1.4.1.2011.5.25.251.1.1.22 | INTEGER | read-create | Indicates the mode of fsk. Options: bell202(1) -bell 202 ccittV23(2) -ccitt v23 ntt(3) -ntt Default: bell202(1) |
| INT hwEntPstnUserCidTasPattern | 1.3.6.1.4.1.2011.5.25.251.1.1.23 | INTEGER | read-create | Indicates the mode of tas. Options: 1. noTas(1) -NO TAS 2. dtAs(2) -DT AS Default: noTas(1) |
| hwEntPstnUserOperTable | 1.3.6.1.4.1.2011.5.25.251.2 | not-accessible | This table is used to maintain PSTN users. The index of this entry is hwEntPstnUserOperName. | |
| hwEntPstnUserOperEntry | 1.3.6.1.4.1.2011.5.25.251.2.1 | not-accessible | This table is used to maintain PSTN users. The index of this entry is hwEntPstnUserOperName. | |
| STR hwEntPstnUserOperName | 1.3.6.1.4.1.2011.5.25.251.2.1.1 | DisplayString | not-accessible | Indicates the user's name. |
| INT hwEntPstnUserSrvState | 1.3.6.1.4.1.2011.5.25.251.2.1.2 | INTEGER | read-only | Indicates the running status. Options: idle(1) busy(2) fault(3) unusable(4) onhook(5) offHookNamal(6) offHookParking(7) ring(8) |
| INT hwEntPstnUserAdminState | 1.3.6.1.4.1.2011.5.25.251.2.1.3 | INTEGER | read-only | Indicates the administration status. Options: lBlock(1) -the service is blocked cause of the local reason rBlock(2) -the service is blocked cause of the remote reason startSvc(3) -the service is normal shuttingDown(4) -the service is shutting down graceful delayTest(5) -the user is waiting for testing vsqmTest(6) -the user is in vsqm test |
| INT hwEntPstnUserAdminOper | 1.3.6.1.4.1.2011.5.25.251.2.1.4 | INTEGER | read-write | Indicates the maintenance operation. Options: startService(1) -start service endService(2) -stop service deferEndingService(3) -stop service gracefully |
| I32 hwEntPstnUserMaxCobTime | 1.3.6.1.4.1.2011.5.25.251.2.1.5 | Integer32 | read-write | Indicates length of waiting timer for defer end service. Default: 240 Unit: minute |
| INT hwEntPstnUserOnexpire | 1.3.6.1.4.1.2011.5.25.251.2.1.6 | INTEGER | read-write | Indicates disposal mode when defer end service timeout. Options: force(1) -force user to end service when end-service timeout cancel(2) -cancel end service when end-service timeout Default: force(1) |
| hwEntBraUserConfigTable | 1.3.6.1.4.1.2011.5.25.251.3 | not-accessible | This table is used to add, delete, modify, and query the BRA user. The index of this table is hwEntBraUserName. | |
| hwEntBraUserConfigEntry | 1.3.6.1.4.1.2011.5.25.251.3.1 | not-accessible | This table is used to add, delete, modify, and query the BRA user. The index of this entry is hwEntBraUserName. | |
| STR hwEntBraUserName | 1.3.6.1.4.1.2011.5.25.251.3.1.1 | DisplayString | not-accessible | Indicates the user's name. |
| I32 hwEntBraUserPort | 1.3.6.1.4.1.2011.5.25.251.3.1.2 | Integer32 | read-create | Indicates the user's port. Bits 31-30 (2 bits): reserved. Bits 29-20 (10 bits): slot index. Bits 19-10 (10 bits): subcard index. Bits 9-0 (10 bits): port index. |
| I32 hwEntBraUserMgId | 1.3.6.1.4.1.2011.5.25.251.3.1.3 | Integer32 | read-create | Indicates the sipag ID. |
| STR hwEntBraUserTelNo | 1.3.6.1.4.1.2011.5.25.251.3.1.4 | DisplayString | read-create | Indicates the user telephone number. |
| I32 hwEntBraUserUserGroupId | 1.3.6.1.4.1.2011.5.25.251.3.1.5 | Integer32 | read-create | Indicates the user's group id. |
| ROW hwEntBraUserRowStatus | 1.3.6.1.4.1.2011.5.25.251.3.1.6 | RowStatus | read-create | Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6) |
| INT hwEntBraUserPriority | 1.3.6.1.4.1.2011.5.25.251.3.1.7 | INTEGER | read-create | Indicates the priority of the terminal. Options: cat1(1) -the highest priority cat2(2) -the middle priority cat3(3) -the lowest priority Default: cat3(3) |
| INT hwEntBraUserUniErrReport | 1.3.6.1.4.1.2011.5.25.251.3.1.8 | INTEGER | read-create | Indicates the flag of UNI fault report. Options: 1. enable(1) 2. disable(2) Default: disable(2) |
| I32 hwEntBraUserAutoResumeLimit | 1.3.6.1.4.1.2011.5.25.251.3.1.9 | Integer32 | read-create | Indicates the threshold of auto resume times. Default: 20 |
| hwEntBraUserOperTable | 1.3.6.1.4.1.2011.5.25.251.4 | not-accessible | This table is used to maintain BRA users. The index of this table is hwEntBraUserOperName. | |
| hwEntBraUserOperEntry | 1.3.6.1.4.1.2011.5.25.251.4.1 | not-accessible | This table is used to maintain BRA users. The index of this entry is hwEntBraUserOperName. | |
| STR hwEntBraUserOperName | 1.3.6.1.4.1.2011.5.25.251.4.1.1 | DisplayString | not-accessible | Indicates the user's name. |
| INT hwEntBraUserB0SrvState | 1.3.6.1.4.1.2011.5.25.251.4.1.2 | INTEGER | read-only | Indicates the running status of the BRA B0 channel. Options: idle(1) busy(2) fault(3) unusable(4) onhook(5) offHookNamal(6) offHookParking(7) ring(8) |
| INT hwEntBraUserB1SrvState | 1.3.6.1.4.1.2011.5.25.251.4.1.3 | INTEGER | read-only | Indicates the running status of the BRA B1 channel. Options: idle(1) busy(2) fault(3) unusable(4) onhook(5) offHookNamal(6) offHookParking(7) ring(8) |
| INT hwEntBraUserB0AdminState | 1.3.6.1.4.1.2011.5.25.251.4.1.4 | INTEGER | read-only | Indicates the administration status of the BRA B0 channel. Options: lBlock(1) -the service is blocked cause of the local reason rBlock(2) -the service is blocked cause of the remote reason startSvc(3) -the service is normal shuttingDown(4) -the service is shutting down graceful delayTest(5) -the user is waiting for testing vsqmTest(6) -the user is in vsqm test |
| INT hwEntBraUserB1AdminState | 1.3.6.1.4.1.2011.5.25.251.4.1.5 | INTEGER | read-only | Indicates the administration status of the BRA B1 channel. Options: lBlock(1) -the service is blocked cause of the local reason rBlock(2) -the service is blocked cause of the remote reason startSvc(3) -the service is normal shuttingDown(4) -the service is shutting down graceful delayTest(5) -the user is waiting for testing vsqmTest(6) -the user is in vsqm test |
| INT hwEntBraUserAdminOper | 1.3.6.1.4.1.2011.5.25.251.4.1.6 | INTEGER | read-write | Indicates the maintenance operation of the BRA port. Options: startService(1) -start service endService(2) -stop service deferEndingService(3) -stop service gracefully |
| INT hwEntBraUserDState | 1.3.6.1.4.1.2011.5.25.251.4.1.7 | INTEGER | read-only | Indicates the status of the BRA D channel. Options: established(1) blocked(2) released(3) teiAssigned(4) teiUnassigned(5) |
| I32 hwEntBraUserMaxCobTime | 1.3.6.1.4.1.2011.5.25.251.4.1.8 | Integer32 | read-write | Indicates the length of waiting timer for defer end service. Default:240 Unit: minute |
| INT hwEntBraUserOnexpire | 1.3.6.1.4.1.2011.5.25.251.4.1.9 | INTEGER | read-write | Indicates the disposal mode when defer end service timeout. Options: force(1) -force user to end service cancel(2) -cancel user's end service Default: force(1) |
| hwEntPraUserConfigTable | 1.3.6.1.4.1.2011.5.25.251.5 | not-accessible | This table is used to add, delete, modify, and query the PRA user. The index of this table is the hwEntPraUserName. | |
| hwEntPraUserConfigEntry | 1.3.6.1.4.1.2011.5.25.251.5.1 | not-accessible | This table is used to add, delete, modify, and query the PRA user. The index of this entry is the hwEntPraUserName. | |
| STR hwEntPraUserName | 1.3.6.1.4.1.2011.5.25.251.5.1.1 | DisplayString | not-accessible | Indicates the user's name. |
| I32 hwEntPraUserPort | 1.3.6.1.4.1.2011.5.25.251.5.1.2 | Integer32 | read-create | Indicates the user's port. Bits 31-30 (2 bits): reserved. Bits 29-20 (10 bits): slot index. Bits 19-10 (10 bits): subcard index. Bits 9-0 (10 bits): port index. |
| I32 hwEntPraUserMgId | 1.3.6.1.4.1.2011.5.25.251.5.1.3 | Integer32 | read-create | Indicates the sipag ID. |
| STR hwEntPraUserTelNo | 1.3.6.1.4.1.2011.5.25.251.5.1.4 | DisplayString | read-create | Indicates the user's telphone number. |
| I32 hwEntPraUserUserGroupId | 1.3.6.1.4.1.2011.5.25.251.5.1.5 | Integer32 | read-create | Indicates the user's group id. |
| ROW hwEntPraUserRowStatus | 1.3.6.1.4.1.2011.5.25.251.5.1.6 | RowStatus | read-create | Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6) |
| INT hwEntPraUserPriority | 1.3.6.1.4.1.2011.5.25.251.5.1.7 | INTEGER | read-create | Indicates terminal priority. Options: cat1(1) -the highest priority cat2(2) -the middle priority cat3(3) -the lowest priority Default: cat(3) |
| INT hwEntPraUserUniErrReport | 1.3.6.1.4.1.2011.5.25.251.5.1.8 | INTEGER | read-create | Indicates the flag of UNI fault report. Options: enable(1) -enable UNI fault report of e1 port disable(2) -disable UNI fault report of e1 port Default: disable(2) |
| BIT hwEntPraUserSubChnMask | 1.3.6.1.4.1.2011.5.25.251.5.1.9 | Bits | read-create | Indicates the sub channel mask code. Default: 11111111111111111111111111111111 |
| I32 hwEntPraUserAutoResumeLimit | 1.3.6.1.4.1.2011.5.25.251.5.1.10 | Integer32 | read-create | Indicates the threshold of auto resume times. Default: 20 |
| hwEntPraUserOperTable | 1.3.6.1.4.1.2011.5.25.251.6 | not-accessible | This table is used to maintain PRA users. The index of this table is hwEntPraUserOperNamee. | |
| hwEntPraUserOperEntry | 1.3.6.1.4.1.2011.5.25.251.6.1 | not-accessible | This table is used to maintain PRA users. The index of this entry is hwEntPraUserOperName. | |
| STR hwEntPraUserOperName | 1.3.6.1.4.1.2011.5.25.251.6.1.1 | DisplayString | not-accessible | Indicates the user's name. |
| OCT hwEntPraUserBchnSrvState | 1.3.6.1.4.1.2011.5.25.251.6.1.2 | OCTET STRING | read-only | Indicates the running service status of the service layer of the 32 B channels. Each character corresponds to a timeslot. The value of the character is as follows: 1: Idle 2: Busy 3: Faulty 4: Unavailable |
| OCT hwEntPraUserBchnAdminState | 1.3.6.1.4.1.2011.5.25.251.6.1.3 | OCTET STRING | read-only | Indicates the administration status of the service layer of the 32 B channels. Each character corresponds to a timeslot. The value of the character is as follows: 1: blocked-locally 2: blocked-remotely 3: in-service 4: shutting-down |
| INT hwEntPraUserDState | 1.3.6.1.4.1.2011.5.25.251.6.1.4 | INTEGER | read-only | Indicates the status of the PRA D channel. Options: released(1) established(2) blocked(3) teiAssigned(4) teiUnassigned(5) |
| INT hwEntPraUserAdminOper | 1.3.6.1.4.1.2011.5.25.251.6.1.5 | INTEGER | read-write | Indicates the service operation. Options: startService(1) -start service endService(2) -stop service deferEndingService(3) -stop service gracefully |
| I32 hwEntPraUserMaxCobTime | 1.3.6.1.4.1.2011.5.25.251.6.1.6 | Integer32 | read-write | Indicates length of waiting timer for PRA user defer end service. Default: 240 Unit: minute |
| INT hwEntPraUserOnexpire | 1.3.6.1.4.1.2011.5.25.251.6.1.7 | INTEGER | read-write | Indicates disposal mode when PRA user defer end service timeout. Options: force(1) -force end service cancel(2) -cancel end service Default: force(1) |
| hwEntUserExtendNumberConfigTable | 1.3.6.1.4.1.2011.5.25.251.7 | not-accessible | This table is used to config extern number of sipag users. The indexes of this table are hwEntSipagUserName, hwEntUserExtendNumber. | |
| hwEntUserExtendNumberConfigEntry | 1.3.6.1.4.1.2011.5.25.251.7.1 | not-accessible | This table is used to config extern number of the SIP user. The indexes of this entry are hwEntSipagUserName, hwEntUserExtendNumber. | |
| STR hwEntSipagUserName | 1.3.6.1.4.1.2011.5.25.251.7.1.1 | DisplayString | not-accessible | Indicates the SipAg user's name. |
| STR hwEntUserExtendNumber | 1.3.6.1.4.1.2011.5.25.251.7.1.2 | DisplayString | not-accessible | Indicates the extend number. |
| I32 hwEntUserExtendUserGroupId | 1.3.6.1.4.1.2011.5.25.251.7.1.3 | Integer32 | read-write | Indicates the user's group id. |
| ROW hwEntUserExtendRowStatus | 1.3.6.1.4.1.2011.5.25.251.7.1.4 | RowStatus | read-write | Indicates the RowStatus. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6) |
| hwEntServiceDataConfigTable | 1.3.6.1.4.1.2011.5.25.251.8 | not-accessible | This table is used to config PSTN user's service data. The index of this table is hwEntServiceDataName. | |
| hwEntServiceDataConfigEntry | 1.3.6.1.4.1.2011.5.25.251.8.1 | not-accessible | This table is used to config PSTN user's service data. The index of this entry is hwEntServiceDataName. | |
| STR hwEntServiceDataUserName | 1.3.6.1.4.1.2011.5.25.251.8.1.1 | DisplayString | not-accessible | Indicates the user name of the service data. |
| STR hwEntServiceDataTelno | 1.3.6.1.4.1.2011.5.25.251.8.1.2 | DisplayString | not-accessible | Indicates the telephone number of the service data. |
| U32 hwEntServiceDataCentrexNo | 1.3.6.1.4.1.2011.5.25.251.8.1.3 | Unsigned32 | read-create | Indicates the centrex number. |
| STR hwEntServiceDataCentrexPrefix | 1.3.6.1.4.1.2011.5.25.251.8.1.4 | DisplayString | read-create | Indicates the centrex prefix. |
| INT hwEntServiceDataCentrexDialMode | 1.3.6.1.4.1.2011.5.25.251.8.1.5 | INTEGER | read-create | Indicates the centrex dial mode. Options: 1. directly(1) -dial directly 2. secondary(2) -dial secondary Default: directly(1) |
| INT hwEntServiceDataMwiMode | 1.3.6.1.4.1.2011.5.25.251.8.1.6 | INTEGER | read-create | Indicates the mwi mode. Options: deferred(1) immediate(2) combine(3) Default: deferred(1) |
| I32 hwEntServiceDataHotTime | 1.3.6.1.4.1.2011.5.25.251.8.1.7 | Integer32 | read-create | Indicates the hotline time. Default: 5 Unit: second |
| STR hwEntServiceDataHotLineNum | 1.3.6.1.4.1.2011.5.25.251.8.1.8 | DisplayString | read-create | Indicates the hotline number. |
| INT hwEntServiceDataDialTone | 1.3.6.1.4.1.2011.5.25.251.8.1.9 | INTEGER | read-create | Indicates the dial tone. Options: normal(1) -normal tone special(2) -special tone mw(3) -message waiting tone Default: normal(1) |
| STR hwEntServiceDataCfbNum | 1.3.6.1.4.1.2011.5.25.251.8.1.10 | DisplayString | read-create | Indicates the cfb number. |
| STR hwEntServiceDataCfnrNum | 1.3.6.1.4.1.2011.5.25.251.8.1.11 | DisplayString | read-create | Indicates the cfnr number. |
| STR hwEntServiceDataCfuNum | 1.3.6.1.4.1.2011.5.25.251.8.1.12 | DisplayString | read-create | Indicates the cfu number. |
| I32 hwEntServiceDataCfnrTime | 1.3.6.1.4.1.2011.5.25.251.8.1.13 | Integer32 | read-create | Indicates the cfnr time. Default: 100 Unit: second |
| ROW hwEntServiceDataRowStatus | 1.3.6.1.4.1.2011.5.25.251.8.1.14 | RowStatus | read-create | Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6) |
| STR hwEntUserAuthAuthName | 1.3.6.1.4.1.2011.5.25.251.8.1.15 | DisplayString | read-write | Indicates the authorization username. |
| INT hwEntUserAuthAuthPasswordMode | 1.3.6.1.4.1.2011.5.25.251.8.1.16 | INTEGER | read-write | Indicates the authorization mode of the password. Options: password(1) -authorized by password ha1(2) -authorized by ha1 Default: password(1) |
| STR hwEntUserAuthAuthPassword | 1.3.6.1.4.1.2011.5.25.251.8.1.17 | DisplayString | read-write | Indicates the authorization password. |
| STR hwEntUserAuthAuthHA1 | 1.3.6.1.4.1.2011.5.25.251.8.1.18 | DisplayString | read-write | Indicates the authorization HA1 password. |
| INT hwEntUserRightFlagCallHold | 1.3.6.1.4.1.2011.5.25.251.8.1.19 | INTEGER | read-write | Indicates the right flag of callhold. Options: enable(1) disable(2) Default: enable(1) |
| INT hwEntUserRightFlagThreeParty | 1.3.6.1.4.1.2011.5.25.251.8.1.20 | INTEGER | read-write | Indicates the right flag of Three-party. Options: enable(1) disable(2) Default: enable(1) |
| INT hwEntUserRightFlagConf | 1.3.6.1.4.1.2011.5.25.251.8.1.21 | INTEGER | read-write | Indicates the right flag of Conf. Options: enable(1) disable(2) Default: enable(1) |
| INT hwEntUserRightFlagCt | 1.3.6.1.4.1.2011.5.25.251.8.1.22 | INTEGER | read-write | Indicates the right flag of CT. Options: enable(1) disable(2) Default: enable(1) |
| INT hwEntUserRightFlagCw | 1.3.6.1.4.1.2011.5.25.251.8.1.23 | INTEGER | read-write | Indicates the right flag of CW. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagMcid | 1.3.6.1.4.1.2011.5.25.251.8.1.24 | INTEGER | read-write | Indicates the right flag of MCID. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagMwi | 1.3.6.1.4.1.2011.5.25.251.8.1.25 | INTEGER | read-write | Indicates the right flag of MWI. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagTp | 1.3.6.1.4.1.2011.5.25.251.8.1.26 | INTEGER | read-write | Indicates the right flag of TP. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagCd | 1.3.6.1.4.1.2011.5.25.251.8.1.27 | INTEGER | read-write | Indicates the right flag of CD. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagAnonymousCall | 1.3.6.1.4.1.2011.5.25.251.8.1.28 | INTEGER | read-write | Indicates the right flag of anonymous-call. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagHotLine | 1.3.6.1.4.1.2011.5.25.251.8.1.29 | INTEGER | read-write | Indicates the right flag of hotline. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagUus1 | 1.3.6.1.4.1.2011.5.25.251.8.1.30 | INTEGER | read-write | Indicates the right flag of UUS1. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagUus2 | 1.3.6.1.4.1.2011.5.25.251.8.1.31 | INTEGER | read-write | Indicates the right flag of UUS2. Options: enable(1) disable(2) Default: disable(2) |
| INT hwEntUserRightFlagUus3 | 1.3.6.1.4.1.2011.5.25.251.8.1.32 | INTEGER | read-write | Indicates the right flag of UUS3. Options: enable(1) disable(2) Default: disable(2) |
| hwEntVoiceSipagUserConformance | 1.3.6.1.4.1.2011.5.25.251.10 | |||
| hwEntVoiceSipagUserCompliances | 1.3.6.1.4.1.2011.5.25.251.10.1 | |||
| hwEntVoiceSipagUserCompliance | 1.3.6.1.4.1.2011.5.25.251.10.1.1 | The compliance statement for systems supporting the this module. | ||
| hwEntVoiceSipagUserGroups | 1.3.6.1.4.1.2011.5.25.251.10.2 | |||
| hwEntPstnUserConfigGroup | 1.3.6.1.4.1.2011.5.25.251.10.2.1 | The hwEntPstnUserConfig group. | ||
| hwEntPstnUserOperGroup | 1.3.6.1.4.1.2011.5.25.251.10.2.2 | The hwEntPstnUserOper group. | ||
| hwEntBraUserConfigGroup | 1.3.6.1.4.1.2011.5.25.251.10.2.3 | The hwEntBraUserConfig group. | ||
| hwEntBraUserOperGroup | 1.3.6.1.4.1.2011.5.25.251.10.2.4 | The hwEntBraUserOper group. | ||
| hwEntPraUserConfigGroup | 1.3.6.1.4.1.2011.5.25.251.10.2.5 | The hwEntPraUserConfig group. | ||
| hwEntPraUserOperGroup | 1.3.6.1.4.1.2011.5.25.251.10.2.6 | The hwEntPraUserOper group. | ||
| hwEntUserExtendNumberConfigGroup | 1.3.6.1.4.1.2011.5.25.251.10.2.7 | The hwEntUserExtendNumberConfig group. | ||
| hwEntServiceDataConfigGroup | 1.3.6.1.4.1.2011.5.25.251.10.2.8 | The hwEntServiceDataConfig group. |
RFC description
Huawei enterprise SIP agent voice user configuration and PSTN management.
Start monitoring Huawei voice gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.