All MIBs › HUAWEI-IPDSLAM-SIMULATION-MIB
Organization: Huawei Technologies Co., Ltd.
Last Updated: 2011-05-19
Category: Domain: DSL, Vendor: Huawei
Description: Huawei IP-DSLAM simulation MIB providing objects for simulating subscriber line conditions and testing DSLAM service configurations in lab environments.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-IPDSLAM-SIMULATION-MIB?
HUAWEI-IPDSLAM-SIMULATION-MIB provides objects for simulating subscriber line conditions and testing DSLAM service configurations, intended for lab and validation environments rather than live production traffic. It exposes configuration objects that let an engineer apply artificial line-condition profiles (such as noise or attenuation characteristics) to a DSLAM under test. Because its purpose is simulation rather than field operation, its "monitoring" value is mainly confirming a simulated test profile has been applied and is running as configured, rather than tracking real subscriber hardware or software health; it is honestly a test-configuration tool, not a production fault/performance source. It has no significant dependency beyond the core DSLAM interface and port MIBs it exercises during a simulated test. It is used in Huawei R&D or field validation labs when qualifying DSLAM behavior under controlled line conditions before deployment. Network engineers evaluating or troubleshooting this functionality can download the HUAWEI-IPDSLAM-SIMULATION-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-IPDSLAM-SIMULATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei IP-DSLAM platforms (lab/test environments)
Monitoring Examples
An engineer would configure a simulated line-condition profile via this MIB and then poll the corresponding status objects to confirm the simulation is active and applied to the intended test port, rather than deriving any live subscriber-traffic insight from it, since this MIB models a lab test scenario, not production monitoring.
What Can Be Monitored
- simulated line condition profile configuration
- simulation test status
- applied simulation parameters
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-MIB
| huaweiMgmt | OBJECT-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwIpdslamSimulation | 1.3.6.1.4.1.2011.5.113 | The MIB is used to configure the simulation for the DSLAM. | ||
| hwDhcpSimulateObject | 1.3.6.1.4.1.2011.5.113.1 | |||
| hwDhcpSimulateCfgTable | 1.3.6.1.4.1.2011.5.113.1.1 | not-accessible | This table is mainly used to configure the DHCP simulation. You can use the set operation to set a leave in the table to start a DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing DHCP simulation instances in the current system. The indexes of this table are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress. | |
| hwDhcpSimulateCfgEntry | 1.3.6.1.4.1.2011.5.113.1.1.1 | not-accessible | This table is mainly used to configure the DHCP simulation. You can use the set operation to set a leave in the table to start a DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing DHCP simulation instances in the current system. The indexes of this entry are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress. | |
| I32 hwDhcpSimulateFlowId | 1.3.6.1.4.1.2011.5.113.1.1.1.1 | Integer32 | not-accessible | Indicates the flow ID of the user to be simulated. This leave is the index of hwDhcpSimulateCfgTable. The value of this leave must be set when a DHCP simulation is started on the OLT. |
| MAC hwDhcpSimulateMacAddress | 1.3.6.1.4.1.2011.5.113.1.1.1.2 | MacAddress | not-accessible | Indicates the MAC address of the user to be simulated. In the start of DHCP simulation, the recommended MAC address corresponding this leave is the MAC address of an actual user. This leave is the index of hwDhcpSimulateCfgTable. The value of this leave must be set when a DHCP simulation is started on the OLT. |
| U32 hwDhcpSimulateUserVlanTagNumber | 1.3.6.1.4.1.2011.5.113.1.1.1.3 | Unsigned32 | read-write | Indicates the number of tags carried by the user-side packet. Options: 1. untag(0) -Indicates that the user packet is untagged. 2. singleTag(1) -Indicates that the user packet is single tag. |
| U32 hwDhcpSimulateUserVlanid | 1.3.6.1.4.1.2011.5.113.1.1.1.4 | Unsigned32 | read-write | Indicates the VLAN ID of the user-side packet. If hwDhcpSimulateUserVlanTagNumber is 0, this item does not need to be configured. If the value of this leave is 0 and hwDhcpSimulateUserVlanTagNumber is 1, the current mode is priority-tag. Range: 0-4095. |
| OCT hwDhcpSimulateOption60 | 1.3.6.1.4.1.2011.5.113.1.1.1.5 | OCTET STRING | read-write | Indicates the option 60 contents of the DHCP simulation instance. The length is 0-64 bytes. The system considers that this leave is not configured when the length is 0. |
| U32 hwDhcpSimulateOption61Type | 1.3.6.1.4.1.2011.5.113.1.1.1.6 | Unsigned32 | read-write | Indicates the option 61 type of the DHCP simulation instance. The values are 0 and 1. Options: 1. string(0) -Indicates that the option 61 contents are a string. 2. mac(1) -Indicates that the option 61 contents are a hardware address. |
| OCT hwDhcpSimulateOption61ClientId | 1.3.6.1.4.1.2011.5.113.1.1.1.7 | OCTET STRING | read-write | Indicates the option 61 contents of the DHCP simulation instance. The length is 0-64 bytes. |
| IP hwDhcpSimulatePingHost1IPAddress | 1.3.6.1.4.1.2011.5.113.1.1.1.8 | IpAddress | read-write | Indicates the first host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| IP hwDhcpSimulatePingHost2IPAddress | 1.3.6.1.4.1.2011.5.113.1.1.1.9 | IpAddress | read-write | Indicates the second host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| IP hwDhcpSimulatePingHost3IPAddress | 1.3.6.1.4.1.2011.5.113.1.1.1.10 | IpAddress | read-write | Indicates the third host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| IP hwDhcpSimulatePingHost4IPAddress | 1.3.6.1.4.1.2011.5.113.1.1.1.11 | IpAddress | read-write | Indicates the fourth host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| IP hwDhcpSimulatePingHost5IPAddress | 1.3.6.1.4.1.2011.5.113.1.1.1.12 | IpAddress | read-write | Indicates the fifth host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| ROW hwDhcpSimulateRowStatus | 1.3.6.1.4.1.2011.5.113.1.1.1.13 | RowStatus | read-write | Indicates the operation type and is mainly used to start or stop the DHCP simulation. During query, if the corresponding simulation instance exists, the result is active. Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -means to create a DHCP simulation. 3. destroy(6) -means to stop a DHCP simulation. |
| hwDhcpSimulateResultTable | 1.3.6.1.4.1.2011.5.113.1.2 | not-accessible | Indicates the simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this table are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress. | |
| hwDhcpSimulateResultEntry | 1.3.6.1.4.1.2011.5.113.1.2.1 | not-accessible | Indicates the simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this entry are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress. | |
| INT hwDhcpSimulateStatus | 1.3.6.1.4.1.2011.5.113.1.2.1.1 | INTEGER | read-only | Indicates the simulation status of the current simulation instance. Options: 1. dhcpProcessing(1) -indicates DHCP processing. 2. pingProcessing(2) -indicates ping processing. 3. finished(3) -Indicates that the simulation is finished. 4. unknown(4) -indicates other status. |
| INT hwDhcpSimulateResult | 1.3.6.1.4.1.2011.5.113.1.2.1.2 | INTEGER | read-only | Indicates the simulation result of the current simulation instance. Options: 1. sendPacketFail(1) -Indicates that the packet fails to be sent. 2. dhcpServerNotFound(2) -Indicates that the DHCP server cannot be found. 3. dhcpServerRejectRequest(3) -Indicates that the DHCP server rejects the request. 4. getIpOvertime(4) -Indicates that the request for IP address is overtime. 5. getIpSuccessful(5) -Indicates that the request for IP address succeeds. 6. allPingSucceed(6) -Indicates that all ping operations succeed. 7. partialPingSucceed(7) -Indicates that parts of ping operations succeed. 8. allPingFail(8) -Indicates that all ping operations fail. 9. systemResourceNotEnough(9) -Indicates that the resource is not enough. 10. unknown(10) -Indicates other results. |
| IP hwDhcpSimulateUserIp | 1.3.6.1.4.1.2011.5.113.1.2.1.3 | IpAddress | read-only | Indicates the simulation user IP address that is obtained in the DHCP simulation instance. |
| IP hwDhcpSimulateSubNetMask | 1.3.6.1.4.1.2011.5.113.1.2.1.4 | IpAddress | read-only | Indicates the mask of the simulation user IP address that is obtained in the DHCP simulation instance. |
| IP hwDhcpSimulateDhcpServerIp | 1.3.6.1.4.1.2011.5.113.1.2.1.5 | IpAddress | read-only | Indicates the DHCP server IP address in the DHCP simulation instance. |
| IP hwDhcpSimulatePrimaryDnsServerIp | 1.3.6.1.4.1.2011.5.113.1.2.1.6 | IpAddress | read-only | Indicates the IP address of the primary DNS server in the DHCP simulation instance. |
| IP hwDhcpSimulateSecondaryDnsServerIp | 1.3.6.1.4.1.2011.5.113.1.2.1.7 | IpAddress | read-only | Indicates the IP address of the secondary DNS server in the DHCP simulation instance. |
| IP hwDhcpSimulateGatewayIp | 1.3.6.1.4.1.2011.5.113.1.2.1.8 | IpAddress | read-only | Indicates the IP address of the gateway in the DHCP simulation instance. |
| IP hwDhcpSimulateDefaultGatewayIp | 1.3.6.1.4.1.2011.5.113.1.2.1.9 | IpAddress | read-only | Indicates the IP address of the default gateway in the DHCP simulation instance. |
| IP hwDhcpSimulateDest1IpAddr | 1.3.6.1.4.1.2011.5.113.1.2.1.10 | IpAddress | read-only | Indicates the destination IP address of the first route in the DHCP simulation instance. |
| IP hwDhcpSimulateDest1MaskAddr | 1.3.6.1.4.1.2011.5.113.1.2.1.11 | IpAddress | read-only | Indicates the mask corresponding to the destination IP address of the first route in the DHCP simulation instance. |
| IP hwDhcpSimulateDest1NextHop | 1.3.6.1.4.1.2011.5.113.1.2.1.12 | IpAddress | read-only | Indicates the next hop IP address of the first route in the DHCP simulation instance. |
| IP hwDhcpSimulateDest2IpAddr | 1.3.6.1.4.1.2011.5.113.1.2.1.13 | IpAddress | read-only | Indicates the destination IP address of the second route in the DHCP simulation instance. |
| IP hwDhcpSimulateDest2MaskAddr | 1.3.6.1.4.1.2011.5.113.1.2.1.14 | IpAddress | read-only | Indicates the mask corresponding to the destination IP address of the second route in the DHCP simulation instance. |
| IP hwDhcpSimulateDest2NextHop | 1.3.6.1.4.1.2011.5.113.1.2.1.15 | IpAddress | read-only | Indicates the next hop IP address of the second route in the DHCP simulation instance. |
| IP hwDhcpSimulateDest3IpAddr | 1.3.6.1.4.1.2011.5.113.1.2.1.16 | IpAddress | read-only | Indicates the destination IP address of the third route in the DHCP simulation instance. |
| IP hwDhcpSimulateDest3MaskAddr | 1.3.6.1.4.1.2011.5.113.1.2.1.17 | IpAddress | read-only | Indicates the mask corresponding to the destination IP address of the third route in the DHCP simulation instance. |
| IP hwDhcpSimulateDest3NextHop | 1.3.6.1.4.1.2011.5.113.1.2.1.18 | IpAddress | read-only | Indicates the next hop IP address of the third route in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost1TotalCount | 1.3.6.1.4.1.2011.5.113.1.2.1.19 | Unsigned32 | read-only | Indicates the total times of pinging the first host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost1OkCount | 1.3.6.1.4.1.2011.5.113.1.2.1.20 | Unsigned32 | read-only | Indicates the times of successfully pinging the first host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost2TotalCount | 1.3.6.1.4.1.2011.5.113.1.2.1.21 | Unsigned32 | read-only | Indicates the total times of pinging the second host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost2OkCount | 1.3.6.1.4.1.2011.5.113.1.2.1.22 | Unsigned32 | read-only | Indicates the times of successfully pinging the second host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost3TotalCount | 1.3.6.1.4.1.2011.5.113.1.2.1.23 | Unsigned32 | read-only | Indicates the total times of pinging the third host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost3OkCount | 1.3.6.1.4.1.2011.5.113.1.2.1.24 | Unsigned32 | read-only | Indicates the times of successfully pinging the third host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost4TotalCount | 1.3.6.1.4.1.2011.5.113.1.2.1.25 | Unsigned32 | read-only | Indicates the total times of pinging the fourth host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost4OkCount | 1.3.6.1.4.1.2011.5.113.1.2.1.26 | Unsigned32 | read-only | Indicates the times of successfully pinging the fourth host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost5TotalCount | 1.3.6.1.4.1.2011.5.113.1.2.1.27 | Unsigned32 | read-only | Indicates the total times of pinging the fifth host IP address in the DHCP simulation instance. |
| U32 hwDhcpSimulatePingHost5OkCount | 1.3.6.1.4.1.2011.5.113.1.2.1.28 | Unsigned32 | read-only | Indicates the times of successfully pinging the fifth host IP address in the DHCP simulation instance. |
| OCT hwDhcpSimulateTftpServer | 1.3.6.1.4.1.2011.5.113.1.2.1.29 | OCTET STRING | read-only | Indicates the name of the Tftp server in the DHCP simulation instance. The length is 0-256 bytes. |
| OCT hwDhcpSimulateBootFileName | 1.3.6.1.4.1.2011.5.113.1.2.1.30 | OCTET STRING | read-only | Indicates the name of the boot file in the DHCP simulation instance. The length is 0-256 bytes. |
| IP hwDhcpSimulateTimeServerIp | 1.3.6.1.4.1.2011.5.113.1.2.1.31 | IpAddress | read-only | Indicates the IP address of the time server in the DHCP simulation instance. |
| hwOntDhcpSimulateObject | 1.3.6.1.4.1.2011.5.113.2 | |||
| hwOntDhcpSimulateCfgTable | 1.3.6.1.4.1.2011.5.113.2.1 | not-accessible | This table is mainly used to configure the ONT DHCP simulation. You can use the set operation to set a leave in the table to start an ONT DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing ONT DHCP simulation instances in the current system. The indexes of this table are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId. | |
| hwOntDhcpSimulateCfgEntry | 1.3.6.1.4.1.2011.5.113.2.1.1 | not-accessible | This table is mainly used to configure the ONT DHCP simulation. You can use the set operation to set a leave in the table to start an ONT DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing ONT DHCP simulation instances in the current system. The indexes of this entry are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId. | |
| U32 hwOntDhcpSimulatePortindex | 1.3.6.1.4.1.2011.5.113.2.1.1.1 | Unsigned32 | read-write | Indicates the ptp index corresponding to the user to be simulated in the ONT DHCP simulation instance. |
| I32 hwOntDhcpSimulateOntId | 1.3.6.1.4.1.2011.5.113.2.1.1.2 | Integer32 | read-write | Indicates the ONT ID of the user to be simulated in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulateOntPortId | 1.3.6.1.4.1.2011.5.113.2.1.1.3 | Unsigned32 | read-write | Indicates the ONT port ID. The values are 1-8 and all-Fs. All-Fs indicates that the port is a WAN port and non-all Fs indicates that the port is a user-side port. |
| U32 hwOntDhcpSimulateUserVlanTagNumber | 1.3.6.1.4.1.2011.5.113.2.1.1.4 | Unsigned32 | read-write | Indicates the number of VLAN tags when user packets are sent to the ONT. Range: 0-2. 0 - untag. 1 - simgle tag. 2 - double tag. |
| U32 hwOntDhcpSimulateUserOuterVlanId | 1.3.6.1.4.1.2011.5.113.2.1.1.5 | Unsigned32 | read-write | Indicates the outer VLAN ID of user packets and is used with TagNumber. This parameter can be ignored in the case of untag. It is valid in the case of single-tag or double-tag, and the range is 0-4095. All-Fs indicates invalid and no user input. Range: 0-4095. This leave is used when the number of VLAN tags is 1 or 2. |
| U32 hwOntDhcpSimulateUserOuterPriority | 1.3.6.1.4.1.2011.5.113.2.1.1.6 | Unsigned32 | read-write | Indicates the outer VLAN priority of user packets and is used with TagNumber. This parameter can be ignored in the case of untag. It is valid in the case of single-tag or double-tag, and the range is 0-7. All-Fs indicates invalid and no user input. The default value is 0 in the case of no user input. Range: 0-7. |
| U32 hwOntDhcpSimulateUserInnerVlanId | 1.3.6.1.4.1.2011.5.113.2.1.1.7 | Unsigned32 | read-write | Indicates the inner VLAN ID of user packets and is used with TagNumber. This parameter is valid in the case of double-tag, and the range is 0-4095. All-Fs indicates invalid and no user input. Range: 0-4095. |
| U32 hwOntDhcpSimulateUserInnerPriority | 1.3.6.1.4.1.2011.5.113.2.1.1.8 | Unsigned32 | read-write | Indicates the inner VLAN priority of user packets and is used with TagNumber. This parameter is valid in the case of double-tag, and the range is 0-7. All-Fs indicates invalid and no user input. The default value is 0 in the case of no user input. |
| MAC hwOntDhcpSimulateMacAddress | 1.3.6.1.4.1.2011.5.113.2.1.1.9 | MacAddress | read-write | Indicates the source MAC address used in the simulation. |
| OCT hwOntDhcpSimulateOption60 | 1.3.6.1.4.1.2011.5.113.2.1.1.10 | OCTET STRING | read-write | Indicates the option 60 contents of the ONT DHCP simulation. Character string type, a string of 0-64 characters. |
| U32 hwOntDhcpSimulateOption61Type | 1.3.6.1.4.1.2011.5.113.2.1.1.11 | Unsigned32 | read-write | Indicates the option 61 type of the ONT DHCP simulation. Values: 0-1. 0 indicates character string type and 1 indicate MAC address type. Options: 1. string(0) -Indicates that the option 61 contents are a string. 2. mac(1) -Indicates that the option 61 contents are a hardware address. |
| OCT hwOntDhcpSimulateOption61ClientId | 1.3.6.1.4.1.2011.5.113.2.1.1.12 | OCTET STRING | read-write | Indicates the option 61 contents of the ONT DHCP simulation. Character string type, a string of 0-64 characters. Optiontype = 0 and null in this field indicate no user input for option 61. |
| IP hwOntDhcpSimulatePingHost1IPAddress | 1.3.6.1.4.1.2011.5.113.2.1.1.13 | IpAddress | read-write | Indicates the first host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| IP hwOntDhcpSimulatePingHost2IPAddress | 1.3.6.1.4.1.2011.5.113.2.1.1.14 | IpAddress | read-write | Indicates the second host IP address to be pinged in the ONT DHCP simulation. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| IP hwOntDhcpSimulatePingHost3IPAddress | 1.3.6.1.4.1.2011.5.113.2.1.1.15 | IpAddress | read-write | Indicates the third host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| IP hwOntDhcpSimulatePingHost4IPAddress | 1.3.6.1.4.1.2011.5.113.2.1.1.16 | IpAddress | read-write | Indicates the fourth host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| IP hwOntDhcpSimulatePingHost5IPAddress | 1.3.6.1.4.1.2011.5.113.2.1.1.17 | IpAddress | read-write | Indicates the fifth host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. |
| ROW hwOntDhcpSimulateRowStatus | 1.3.6.1.4.1.2011.5.113.2.1.1.18 | RowStatus | read-write | Indicates the operation type and is mainly used to start or stop the ONT DHCP simulation. During query, if the corresponding simulation instance exists, the result is active. Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -means to create a DHCP simulation. 3. destroy(6) -means to stop a DHCP simulation. |
| hwOntDhcpSimulateResultTable | 1.3.6.1.4.1.2011.5.113.2.2 | not-accessible | Indicates the ONT simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this table are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId. | |
| hwOntDhcpSimulateResultEntry | 1.3.6.1.4.1.2011.5.113.2.2.1 | not-accessible | Indicates the ONT simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this entry are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId. | |
| INT hwOntDhcpSimulateStatus | 1.3.6.1.4.1.2011.5.113.2.2.1.1 | INTEGER | read-only | Indicates the simulation status of the current simulation instance. Options: 1. dhcpProcessing(1) -Indicates DHCP processing. 2. pingProcessing(2) -Indicates ping processing. 3. finished(3) -Indicates that the simulation is finished. 4. unknown(4) -Indicates other status. |
| INT hwOntDhcpSimulateResult | 1.3.6.1.4.1.2011.5.113.2.2.1.2 | INTEGER | read-only | Indicates the simulation result of the current simulation instance. Options: 1. success(1) -Indicates that ont dhcp simulation succeeds. 2. userStop(2) -Indicates that user stopped the ont simulation. 3. deviceNotSupport(3) -Indicates that the device does not support simulation. 4. ethPortNotFound(4) -Indicates that eth port is not found. 5. userMacError(5) -Indicates that user mac is invalid. 6. pingDestIpError(6) -Indicates that the destination ip(s) for ping is(are) invalid. 7. vlanPriParaError(7) -Indicates that the VLAN or priority parameters are invalid. 8. dhcpOptionError(8) -Indicates that dhcp options have some errors. 9. wanNotFound(9) -Indicates that WAN port is not found. 10. wanStateError(10) -Indicates that WAN port is in error state. 11. ethPortStateError(11) -Indicates that eth port is in error state. 12. userVlanError(12) -Indicates that user vlan has some error. 13. devResourceNotEnough(13) -Indicates that the resource for the device is not enough. 14. gemportError(14) -Indicates that gemport has some error. 15. sendPktError(15) -Indicates that the packet fails to be sent. 16. dhcpServerNotFound(16) -Indicates that the DHCP server cannot be found. 17. dhcpServerDeny(17) -Indicates that the DHCP server rejects the request. 18. getIpTimeout(18) -Indicates that the request for IP address is overtime. 19. concurrentSmltForbidden(19) -Indicates that the specified ont does not support concurrent simulations. 20. allPingFail(20) -Indicates that all ping operations fail. 21. partialPingFail(21) -Indicates that that parts of ping operations fail. 22. unknown(22) -Indicates that the result is unknown. |
| IP hwOntDhcpSimulateUserIp | 1.3.6.1.4.1.2011.5.113.2.2.1.3 | IpAddress | read-only | Indicates the simulation user IP address that is obtained in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateSubNetMask | 1.3.6.1.4.1.2011.5.113.2.2.1.4 | IpAddress | read-only | Indicates the mask of the simulation user IP address that is obtained in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDhcpServerIp | 1.3.6.1.4.1.2011.5.113.2.2.1.5 | IpAddress | read-only | Indicates the DHCP server IP address in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulatePrimaryDnsServerIp | 1.3.6.1.4.1.2011.5.113.2.2.1.6 | IpAddress | read-only | Indicates the IP address of the primary DNS server in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateSecondaryDnsServerIp | 1.3.6.1.4.1.2011.5.113.2.2.1.7 | IpAddress | read-only | Indicates the IP address of the secondary DNS server in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateGatewayIp | 1.3.6.1.4.1.2011.5.113.2.2.1.8 | IpAddress | read-only | Indicates the IP address of the gateway in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDefaultGatewayIp | 1.3.6.1.4.1.2011.5.113.2.2.1.9 | IpAddress | read-only | Indicates the IP address of the default gateway in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest1IpAddr | 1.3.6.1.4.1.2011.5.113.2.2.1.10 | IpAddress | read-only | Indicates the destination IP address of the first route in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest1MaskAddr | 1.3.6.1.4.1.2011.5.113.2.2.1.11 | IpAddress | read-only | Indicates the mask corresponding to the destination IP address of the first route in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest1NextHop | 1.3.6.1.4.1.2011.5.113.2.2.1.12 | IpAddress | read-only | Indicates the next hop IP address of the first route in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest2IpAddr | 1.3.6.1.4.1.2011.5.113.2.2.1.13 | IpAddress | read-only | Indicates the destination IP address of the second route in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest2MaskAddr | 1.3.6.1.4.1.2011.5.113.2.2.1.14 | IpAddress | read-only | Indicates the mask corresponding to the destination IP address of the second route in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest2NextHop | 1.3.6.1.4.1.2011.5.113.2.2.1.15 | IpAddress | read-only | Indicates the next hop IP address of the second route in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest3IpAddr | 1.3.6.1.4.1.2011.5.113.2.2.1.16 | IpAddress | read-only | Indicates the destination IP address of the third route in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest3MaskAddr | 1.3.6.1.4.1.2011.5.113.2.2.1.17 | IpAddress | read-only | Indicates the mask corresponding to the destination IP address of the third route in the ONT DHCP simulation instance. |
| IP hwOntDhcpSimulateDest3NextHop | 1.3.6.1.4.1.2011.5.113.2.2.1.18 | IpAddress | read-only | Indicates the next hop IP address of the third route in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost1TotalCount | 1.3.6.1.4.1.2011.5.113.2.2.1.19 | Unsigned32 | read-only | Indicates the total times of pinging the first host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost1OkCount | 1.3.6.1.4.1.2011.5.113.2.2.1.20 | Unsigned32 | read-only | Indicates the times of successfully pinging the first host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost2TotalCount | 1.3.6.1.4.1.2011.5.113.2.2.1.21 | Unsigned32 | read-only | Indicates the total times of pinging the second host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost2OkCount | 1.3.6.1.4.1.2011.5.113.2.2.1.22 | Unsigned32 | read-only | Indicates the times of successfully pinging the second host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost3TotalCount | 1.3.6.1.4.1.2011.5.113.2.2.1.23 | Unsigned32 | read-only | Indicates the total times of pinging the third host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost3OkCount | 1.3.6.1.4.1.2011.5.113.2.2.1.24 | Unsigned32 | read-only | Indicates the times of successfully pinging the third host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost4TotalCount | 1.3.6.1.4.1.2011.5.113.2.2.1.25 | Unsigned32 | read-only | Indicates the total times of pinging the fourth host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost4OkCount | 1.3.6.1.4.1.2011.5.113.2.2.1.26 | Unsigned32 | read-only | Indicates the times of successfully pinging the fourth host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost5TotalCount | 1.3.6.1.4.1.2011.5.113.2.2.1.27 | Unsigned32 | read-only | Indicates the total times of pinging the fifth host IP address in the ONT DHCP simulation instance. |
| U32 hwOntDhcpSimulatePingHost5OkCount | 1.3.6.1.4.1.2011.5.113.2.2.1.28 | Unsigned32 | read-only | Indicates the times of successfully pinging the fifth host IP address in the ONT DHCP simulation instance. |
| hwSimulationCommonTraps | 1.3.6.1.4.1.2011.5.113.3 | |||
| hwSimulationCommonTrapsPrefix | 1.3.6.1.4.1.2011.5.113.3.0 | |||
| NTF hwDhcpSimulateExtStatusTrap | 1.3.6.1.4.1.2011.5.113.3.0.1 | This item is mainly used to notify the gateway of the simulation status and result when the simulation is finished. It mainly includes four items: flow ID, MAC address, simulation status, and simulation result. | ||
| NTF hwOntDhcpSimulateExtStatusTrap | 1.3.6.1.4.1.2011.5.113.3.0.2 | This item is mainly used to notify the gateway of the simulation status and result when the simulation is finished. It mainly includes four items: port ID, ONT ID, simulation status, and simulation result. |
RFC description
Configures DHCP simulation for Huawei IP-DSLAM systems to simulate user connections and test network functionality.
Start monitoring Huawei IP-DSLAM platform, lab/test environment (line-condition simulation) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.