| OID symbolic | OID numeric | Type | Access | Description |
|---|
| hwIpDslamInterface | 1.3.6.1.4.1.2011.6.161 | | | The MIB used for configuring the information of the interface
including the IP address on it. |
| hwIpDslamInterfaceObject | 1.3.6.1.4.1.2011.6.161.1 | | | Interface Object. |
| hwIpDslamInterfaceTable | 1.3.6.1.4.1.2011.6.161.1.1 | | not-accessible | This table is used to manage the interface object, such as
create, modify and delete. The indexes of this table are
hwIpDslamInterfaceType and hwIpDslamInterfaceUnitNum. |
| hwIpDslamInterfaceEntry | 1.3.6.1.4.1.2011.6.161.1.1.1 | | not-accessible | This table is used to manage the interface object, such as
create, modify and delete. The indexes of this entry are
hwIpDslamInterfaceType and hwIpDslamInterfaceUnitNum. |
| INT hwIpDslamInterfaceType | 1.3.6.1.4.1.2011.6.161.1.1.1.1 | INTEGER | not-accessible | Indicates the interface type.
Options:
1. inloopback(1) -the system inner loopback interface
2. null(2) -the NULL interface
3. meth(3) -the ethernet interface for management
4. vlanif(4) -the VLAN interface
5. loopback(5) -the loopback interface
6. tunnel(6) -the tunnel interface |
| I32 hwIpDslamInterfaceUnitNum | 1.3.6.1.4.1.2011.6.161.1.1.1.2 | Integer32 | not-accessible | Indicates the interface unit number. The valid range of its
value lies on the interface type. |
| I32 hwIpDslamInterfaceIfIndex | 1.3.6.1.4.1.2011.6.161.1.1.1.3 | Integer32 | read-create | A unique value for each interface. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex. |
| STR hwIpDslamInterfaceIfName | 1.3.6.1.4.1.2011.6.161.1.1.1.4 | DisplayString | read-only | Indicates the interface name. |
| STR hwIpDslamInterfaceIfDescr | 1.3.6.1.4.1.2011.6.161.1.1.1.5 | DisplayString | read-write | Indicates the description of this interface. |
| INT hwIpDslamInterfaceAdminStatus | 1.3.6.1.4.1.2011.6.161.1.1.1.6 | INTEGER | read-write | Interface admin status
Options:
1. up(1) -indicates that the interface is up
2. down(2) -indicates that the interface is down |
| ROW hwIpDslamInterfaceRowStatus | 1.3.6.1.4.1.2011.6.161.1.1.1.7 | RowStatus | read-create | Indicates the row status.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating an interface
3. destroy(6) -indicates deleting an interface |
| hwIpDslamInterfaceIpTable | 1.3.6.1.4.1.2011.6.161.1.2 | | not-accessible | This table is used to manage the interface object, such as
create, modify and delete. The indexes of this table are
hwIpDslamInterfaceIpIfIndex, hwIpDslamInterfaceIpAddressType,
hwIpDslamInterfaceIpAddress and hwIpDslamInterfaceIpPfxLen.
Make sure that the interface identified by the
hwIpDslamInterfaceIpAddress is already created in
hwIpDslamInterfaceTable. |
| hwIpDslamInterfaceIpEntry | 1.3.6.1.4.1.2011.6.161.1.2.1 | | not-accessible | This table is used to manage the interface object, such as
create, modify and delete. The indexes of this entry are
hwIpDslamInterfaceIpIfIndex, hwIpDslamInterfaceIpAddressType,
hwIpDslamInterfaceIpAddress and hwIpDslamInterfaceIpPfxLen.
Make sure that the interface identified by the
hwIpDslamInterfaceIpAddress is already created in
hwIpDslamInterfaceTable. |
| I32 hwIpDslamInterfaceIpIfIndex | 1.3.6.1.4.1.2011.6.161.1.2.1.1 | Integer32 | not-accessible | Indicates which interface the IP address is to be configured.
The value of it is same with the hwIpDslamInterfaceIfIndex
in hwIpDslamInterfaceTable. |
| IPt hwIpDslamInterfaceIpAddressType | 1.3.6.1.4.1.2011.6.161.1.2.1.2 | InetAddressType | not-accessible | The type of the hwIpDslamInterfaceIpAddress address, as defined
in the InetAddress MIB.
Now only support ipv4(1). |
| IP hwIpDslamInterfaceIpAddress | 1.3.6.1.4.1.2011.6.161.1.2.1.3 | InetAddress | not-accessible | The IP address of the interface.
The type of this address is determined by the value of
the hwIpDslamInterfaceIpAddressType object. |
| ADR hwIpDslamInterfaceIpPfxLen | 1.3.6.1.4.1.2011.6.161.1.2.1.4 | InetAddressPrefixLength | not-accessible | If hwIpDslamInterfaceIpAddressType is set to ipv4(1)
or ipv6(2), then this value will contain an appropriate
prefix length for the IP address in object
hwIpDslamInterfaceIpAddress. Otherwise this value is
irrelevant and should be ignored. |
| INT hwIpDslamInterfaceIpFlag | 1.3.6.1.4.1.2011.6.161.1.2.1.5 | INTEGER | read-create | Indicates the flag of the IP address.
Options:
1. primary(1) -indicates that this IP address is the primary
IP address of the interface
2. secondary(2) -indicates that this IP address is the primary
IP address of the interface.
One interface may have one primary IP address,
and several secondary IP addresses. |
| INT hwIpDslamInterfaceIpMethod | 1.3.6.1.4.1.2011.6.161.1.2.1.6 | INTEGER | read-only | Interface IP address acquiring method.
Options:
1. static(1) -indicates the address was manually configured
2. dhcp(2) -indicates the address was assigned by a DHCP server |
| ROW hwIpDslamInterfaceIpRowStatus | 1.3.6.1.4.1.2011.6.161.1.2.1.7 | RowStatus | read-create | Indicates the row status.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating an IP address
3. destroy(6) -indicates deleting an IP address |
| hwIpDslamInterfacePriorityTable | 1.3.6.1.4.1.2011.6.161.1.3 | | not-accessible | This table is used to config the priority marked for the packet
send from the VLAN interface. The index of this table is
hwIpDslamInterfacePriorityIfIndex. |
| hwIpDslamInterfacePriorityEntry | 1.3.6.1.4.1.2011.6.161.1.3.1 | | not-accessible | This table is used to config the priority marked for the packet
send from the VLAN interface. The index of this entry is
hwIpDslamInterfacePriorityIfIndex. |
| I32 hwIpDslamInterfacePriorityIfIndex | 1.3.6.1.4.1.2011.6.161.1.3.1.1 | Integer32 | not-accessible | Indicates which interface the priority is to be configured on.
The value of it is same with the hwIpDslamInterfaceIfIndex
in hwIpDslamInterfaceTable. |
| I32 hwIpDslamInterfacePriorityDefaultDscp | 1.3.6.1.4.1.2011.6.161.1.3.1.2 | Integer32 | read-write | The DSCP value for all packet. A value of -1 indicates that
it has not been configured. In that case, the DSCP in packet
will use the value of 0. |
| I32 hwIpDslamInterfacePriorityDscpForDhcp | 1.3.6.1.4.1.2011.6.161.1.3.1.3 | Integer32 | read-write | The DSCP value for DHCP packet. A value of -1 indicates that
it has not been configured. In that case, the DSCP for
DHCP packet will use the value of
hwIpDslamInterfacePriorityDefaultDscp. |
| I32 hwIpDslamInterfacePriorityDscpForRoutingPkt | 1.3.6.1.4.1.2011.6.161.1.3.1.4 | Integer32 | read-write | The DSCP value for routing-protocol packet. A value of -1
indicates that it has not been configured. In that case,
the DSCP for routing-protocol packet will use the value of
hwIpDslamInterfacePriorityDefaultDscp. |
| I32 hwIpDslamInterfacePriorityDefaultTos | 1.3.6.1.4.1.2011.6.161.1.3.1.5 | Integer32 | read-write | The TOS value for all packet. A value of -1 indicates that
it has not been configured. In that case, the TOS in packet
will use the value of 0. |
| I32 hwIpDslamInterfacePriorityTosForDhcp | 1.3.6.1.4.1.2011.6.161.1.3.1.6 | Integer32 | read-write | The TOS value for DHCP packet. A value of -1 indicates that
it has not been configured. In that case, the TOS for
DHCP packet will use the value of
hwIpDslamInterfacePriorityDefaultTos. |
| I32 hwIpDslamInterfacePriorityTosForRoutingPkt | 1.3.6.1.4.1.2011.6.161.1.3.1.7 | Integer32 | read-write | The TOS value for routing-protocol packet. A value of -1
indicates that it has not been configured. In that case,
the TOS for routing-protocol packet will use the value of
hwIpDslamInterfacePriorityDefaultTos. |
