HUAWEI-IPDSLAM-INTERFACE-MIB :: hwIpDslamInterfacePriorityDscpForRoutingPkt

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-IPDSLAM-INTERFACE-MIB › hwIpDslamInterfacePriorityDscpForRoutingPkt

hwIpDslamInterfacePriorityDscpForRoutingPkt

Module: HUAWEI-IPDSLAM-INTERFACE-MIB

OID (symbolic): HUAWEI-IPDSLAM-INTERFACE-MIB::hwIpDslamInterfacePriorityDscpForRoutingPkt

OID (numeric): 1.3.6.1.4.1.2011.6.161.1.3.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The DSCP value for routing-protocol packet. A value of -1 indicates that it has not been configured. In that case, the DSCP for routing-protocol packet will use the value of hwIpDslamInterfacePriorityDefaultDscp.

What is hwIpDslamInterfacePriorityDscpForRoutingPkt?

Sets the DSCP value applied specifically to routing-protocol packets on a DSLAM interface. A value of -1 leaves it unconfigured, in which case routing packets instead inherit the value of hwIpDslamInterfacePriorityDefaultDscp. An admin concerned about routing-protocol stability under congestion might set this to a high DSCP value like 48 to keep control-plane traffic prioritized.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.161.1.3.1.4
snmpwalk -v2c -c public <target> HUAWEI-IPDSLAM-INTERFACE-MIB::hwIpDslamInterfacePriorityDscpForRoutingPkt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.161.1.3.1.4.1
snmpget -v2c -c public <target> HUAWEI-IPDSLAM-INTERFACE-MIB::hwIpDslamInterfacePriorityDscpForRoutingPkt.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.161.1.3.1.4.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hwIpDslamInterfacePriorityDscpForRoutingPkt.1

Start monitoring Huawei IP-DSLAM broadband access platform (interface/IP addressing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-IPDSLAM-INTERFACE-MIB::hwIpDslamInterfacePriorityDscpForRoutingPkt OID value, configure state conditions and alerts, and monitor any Huawei IP-DSLAM broadband access platform (interface/IP addressing) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.6huaweiUtilityHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.6.161hwIpDslamInterfaceHUAWEI-IPDSLAM-INTERFACE-MIB
1.3.6.1.4.1.2011.6.161.1hwIpDslamInterfaceObjectHUAWEI-IPDSLAM-INTERFACE-MIB
1.3.6.1.4.1.2011.6.161.1.3hwIpDslamInterfacePriorityTableHUAWEI-IPDSLAM-INTERFACE-MIB
1.3.6.1.4.1.2011.6.161.1.3.1hwIpDslamInterfacePriorityEntryHUAWEI-IPDSLAM-INTERFACE-MIB
1.3.6.1.4.1.2011.6.161.1.3.1.4hwIpDslamInterfacePriorityDscpForRoutingPktHUAWEI-IPDSLAM-INTERFACE-MIB