HUAWEI-GBOND-MIB

All MIBs › HUAWEI-GBOND-MIB

Organization: Fix-Net Dept, Huawei Technologies Co.,Ltd.

Last Updated: 2012-07-20

Category: Domain: DSL, Vendor: Huawei

Description: Huawei G.Bond MIB for managing bonded DSL line groups providing aggregated bandwidth across multiple DSL pairs per G.998 standards.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-GBOND-MIB?

HUAWEI-GBOND-MIB is a Huawei-proprietary MIB implemented on Huawei DSL access platforms to manage G.Bond, a bonding technology defined in ITU-T G.998.1/G.998.2/G.998.3 that aggregates multiple DSL copper pairs into a single logical high-bandwidth group. Its data covers configuration of bonded line groups (which physical DSL lines belong to a bond group) and operational status of each member line and the aggregate bond, including per-line synchronization state and the combined bandwidth achieved. This supports monitoring hardware/line health: whether all member DSL pairs in a bond group are up and synchronized, whether one pair has dropped out (reducing aggregate bandwidth), and overall bond-group operational status, which is critical for maintaining the promised bandwidth to a subscriber. It is explicitly built on the ITU-T G.998 family of bonding standards referenced in its module description, tying its semantics to that external standard rather than another SNMP MIB. It is typically deployed on Huawei DSLAM or MSAN access platforms in broadband access networks where copper-pair bonding is used to boost per-subscriber bandwidth beyond a single DSL line's limit. Engineers can download the HUAWEI-GBOND-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-GBOND-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei DSLAM/MSAN broadband access platforms

Monitoring Examples

An administrator would poll the bond-group status objects to check whether all configured member DSL lines are synchronized and contributing to the aggregate bandwidth, and would check individual line status within the group to spot a line that has dropped sync. No sample object names were provided for this module, so specific table names cannot be cited, but the module description confirms bonded DSL line-group management is the scope. A bond group reporting reduced aggregate bandwidth alongside one member line down would indicate a physical line fault on that pair needing field investigation.

What Can Be Monitored

bonded DSL line group membership
per-line synchronization status
aggregate bonded bandwidth
bond group operational state

Imported Objects

From HUAWEI-DEVICE-MIB

hwConfigChangeIP
hwFrameIndex	OBJECT-TYPE
hwPortIndex	OBJECT-TYPE
hwSlotIndex	OBJECT-TYPE

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwGBond	1.3.6.1.4.1.2011.6.137			This MIB is used for defining Huawei's GBOND management MIB objects, which is defined base on ITU-T G.998.1, G.998.2 and G.998.3.
GBO hwGBondAdminScheme	1.3.6.1.4.1.2011.6.137.1.1.2	GBondScheme	read-write	A desired bonding scheme for a bonding group. The port to use corresponding bonding scheme if supported. Options: 1. g9981(1) - Instructs the port to use G.998.1 bonding 2. g9982(2) - Instructs the port to use G.998.2 bonding 3. g9983(3) - Instructs the port to use G.998.3 bonding The hwGBondAdminScheme changes must be performed when the admin status of the bonding group is deactivated.
INT hwGBondAdminStatus	1.3.6.1.4.1.2011.6.137.1.1.11	INTEGER	read-write	The admin status of the bonding group, when the admin-status is down, no service should be allowed. Options: 1. deactivate(1) - Deactivate status 2. activate(2) - Activate status
hwGBondAlarmTraps	1.3.6.1.4.1.2011.6.137.3.2
hwGBondAlarmTrapsPrefix	1.3.6.1.4.1.2011.6.137.3.2.0
NTF hwGBondBondProfileChangeTrap	1.3.6.1.4.1.2011.6.137.3.1.0.2			Bonding group profile ID change trap. This notification indicates trap when bonding group profile ID changes.
NTF hwGBondBondStateChangeTrap	1.3.6.1.4.1.2011.6.137.3.1.0.1			Bond status change trap. This notification indicates trap when bond status changes.
hwGBondCommonTraps	1.3.6.1.4.1.2011.6.137.3.1
hwGBondCommonTrapsPrefix	1.3.6.1.4.1.2011.6.137.3.1.0
hwGBondConfEntry	1.3.6.1.4.1.2011.6.137.1.1		not-accessible	Group bonding configuration table. This table is used to describe the configuration, parameters, and running status of the bonding group. The index of this entry is hwGBondPriPort.
hwGBondConfTable	1.3.6.1.4.1.2011.6.137.1		not-accessible	Group bonding configuration table. This table is used to describe the configuration, parameters, and running status of the bonding group. The index of this table is hwGBondPriPort.
OCT hwGBondDesc	1.3.6.1.4.1.2011.6.137.1.1.10	OCTET STRING	read-write	The description of the bonding group.
PHY hwGBondDiscoveryCode	1.3.6.1.4.1.2011.6.137.1.1.4	PhysAddress	read-write	A discovery Code of the G.Bond port (GBS). A unique 6 octet long code used by the discovery function. This object must be instantiated for the -O subtype GBS before writing operations on the gBondBceRemoteDiscoveryCode (Set_if_Clear and Clear_if_Same) are performed by BCEs associated with the GBS. The initial value of this object for -R subtype ports after reset is all zero. For -R subtype ports, the value of this object cannot be changed directly. This value may be changed as a result of writing operation on the gBondBceRemoteDiscoveryCode object of remote BCE of -O subtype, connected to one of the local BCEs associated with the GBS. Discovery must be performed when the link is down. Attempts to change this object must be rejected (in case of SNMP with the error inconsistent value), if the link is Up or Initializing. This object maps to the TR-159 attribute aGroupDiscoveryCode.
I32 hwGBondDownDataRate	1.3.6.1.4.1.2011.6.137.2.1.2	Integer32	read-only	A current G.Bond port operational data rate in the downstream direction, in bps. This object represents an estimation of the sum of individual BCE downstream data rates, modified to compensate for fragmentation and encapsulation overhead (e.g., for an ethernet service, the target data rate of 10Mbps shall allow lossless transmission of full-duplex 10Mbps ethernet frame stream with minimal inter-frame gap).
G32 hwGBondEthInBadFragments	1.3.6.1.4.1.2011.6.137.2.1.7	Gauge32	read-only	The number of fragments which do not fit into the sequence expected by the frame assembly function, that have been received across the gamma interface and discarded (the frame buffer is flushed to the next valid frame start). This object is deprecated in favour of hwGBondEthPortPerfRxBadFragments.
G32 hwGBondEthInErrors	1.3.6.1.4.1.2011.6.137.2.1.4	Gauge32	read-only	The number of error fragments, that have been received across the gamma interface. This object is deprecated in favour of hwGBondEthPortPerfRxErrors.
G32 hwGBondEthInLargeFragments	1.3.6.1.4.1.2011.6.137.2.1.6	Gauge32	read-only	The number of fragments larger than minFragmentSize(512 Bytes), that have been received across the gamma interface and discarded. This object is deprecated in favour of hwGBondEthPortPerfRxLargeFragments.
G32 hwGBondEthInLostEnds	1.3.6.1.4.1.2011.6.137.2.1.10	Gauge32	read-only	The number of missing EndOfPacket indicators expected by the frame assembly function. This object is deprecated in favour of hwGBondEthPortPerfRxLostEnds.
G32 hwGBondEthInLostFragments	1.3.6.1.4.1.2011.6.137.2.1.8	Gauge32	read-only	The number of gaps in the sequence of fragments, which have been received across the gamma interface (the frame buffer is flushed to the next valid frame start, when fragment/fragments expected by the frame assembly function is/are not received). This object is deprecated in favour of hwGBondEthPortPerfRxLostFragments.
G32 hwGBondEthInLostStarts	1.3.6.1.4.1.2011.6.137.2.1.9	Gauge32	read-only	The number of missing StartOfPacket indicators expected by the frame assembly function. This object is deprecated in favour of hwGBondEthPortPerfRxLostStarts.
G32 hwGBondEthInOverflows	1.3.6.1.4.1.2011.6.137.2.1.11	Gauge32	read-only	The number of fragments, received across the gamma interface and discarded, which would have caused the frame assembly buffer to overflow. This object is deprecated in favour of hwGBondEthPortPerfRxOverflows.
G32 hwGBondEthInSmallFragments	1.3.6.1.4.1.2011.6.137.2.1.5	Gauge32	read-only	The number of fragments smaller than minFragmentSize(64 Bytes), that have been received across the gamma interface and discarded. This object is deprecated in favour of hwGBondEthPortPerfRxSmallFragments.
hwGBondEthPM	1.3.6.1.4.1.2011.6.137.5
G32 hwGBondEthPortPerf15MinInvalidIntervals	1.3.6.1.4.1.2011.6.137.5.1.1.3	Gauge32	read-only	A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero except in cases where the data for some intervals are not available.
G32 hwGBondEthPortPerf15MinValidIntervals	1.3.6.1.4.1.2011.6.137.5.1.1.2	Gauge32	read-only	A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collected by the implementation unless the measurement was (re-)started recently, in which case the value will be the number of complete 15 minutes intervals for which there are at least some data.
G32 hwGBondEthPortPerf1DayInvalidIntervals	1.3.6.1.4.1.2011.6.137.5.1.1.15	Gauge32	read-only	A read-only number of 1-day intervals for which data was not always available. The value will typically be zero except in cases where the data for some intervals are not available.
G32 hwGBondEthPortPerf1DayValidIntervals	1.3.6.1.4.1.2011.6.137.5.1.1.14	Gauge32	read-only	A read-only number of 1-day intervals for which data was collected. The value of this object will be 7 or the maximum number of 1-day history intervals collected by the implementation unless the measurement was (re-)started recently, in which case the value will be the number of complete 1-day intervals for which there are at least some data. In certain cases it is possible that some intervals are unavailable. In this case, this object reports the maximum interval number for which data is available.
G32 hwGBondEthPortPerfCurr15MinRxBadFragments	1.3.6.1.4.1.2011.6.137.5.1.1.8	Gauge32	read-only	A read-only count of fragments which do not fit into the sequence expected by the frame assembly function, that have been received and discarded by a G.Bond/Eth port, during the current 15-minute performance interval.
G32 hwGBondEthPortPerfCurr15MinRxErrors	1.3.6.1.4.1.2011.6.137.5.1.1.5	Gauge32	read-only	A read-only count of errored fragments received and discarded by a G.Bond/Eth port, during the current 15-minute performance interval.
G32 hwGBondEthPortPerfCurr15MinRxLargeFragments	1.3.6.1.4.1.2011.6.137.5.1.1.7	Gauge32	read-only	A read-only count of fragments larger than maxFragmentSize (512 Bytes), that have been received and discarded by a G.Bond/Eth port, during the current 15-minute performance interval.
G32 hwGBondEthPortPerfCurr15MinRxLostEnds	1.3.6.1.4.1.2011.6.137.5.1.1.11	Gauge32	read-only	A read-only count of missing EndOfPacket indicators expected by the frame assembly function of a G.Bond/Eth port, during the current 15-minute performance interval.
G32 hwGBondEthPortPerfCurr15MinRxLostFragments	1.3.6.1.4.1.2011.6.137.5.1.1.9	Gauge32	read-only	A read-only count of gaps in the sequence of fragments, expected by the frame assembly function of a G.Bond/Eth port, during the current 15-minute performance interval.
G32 hwGBondEthPortPerfCurr15MinRxLostStarts	1.3.6.1.4.1.2011.6.137.5.1.1.10	Gauge32	read-only	A read-only count of missing StartOfPacket indicators expected by the frame assembly function of a G.Bond/Eth port, during the current 15-minute performance interval.
G32 hwGBondEthPortPerfCurr15MinRxOverflows	1.3.6.1.4.1.2011.6.137.5.1.1.12	Gauge32	read-only	A read-only count of fragments that have been received and discarded by a G.Bond/Eth port, which would have caused the frame assembly buffer to overflow, during the current 15-minute performance interval.
G32 hwGBondEthPortPerfCurr15MinRxSmallFragments	1.3.6.1.4.1.2011.6.137.5.1.1.6	Gauge32	read-only	A read-only count of fragments smaller than minFragmentSize (64 Bytes), that have been received and discarded by a G.Bond/Eth port, during the current 15-minute performance interval.
DAT hwGBondEthPortPerfCurr15MinStartTime	1.3.6.1.4.1.2011.6.137.5.1.1.1	DateAndTime	read-only	Start time of the current 15-minute statistics performance.
G32 hwGBondEthPortPerfCurr15MinTimeElapsed	1.3.6.1.4.1.2011.6.137.5.1.1.4	Gauge32	read-only	A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval.
G32 hwGBondEthPortPerfCurr1DayRxBadFragments	1.3.6.1.4.1.2011.6.137.5.1.1.20	Gauge32	read-only	A read-only count of fragments which do not fit into the sequence expected by the frame assembly function, that have been received and discarded by a G.Bond/Eth port, during the current 1-day performance interval.
G32 hwGBondEthPortPerfCurr1DayRxErrors	1.3.6.1.4.1.2011.6.137.5.1.1.17	Gauge32	read-only	A read-only count of errored fragments received and discarded by a G.Bond/Eth port, during the current 1-day performance interval
G32 hwGBondEthPortPerfCurr1DayRxLargeFragments	1.3.6.1.4.1.2011.6.137.5.1.1.19	Gauge32	read-only	A read-only count of fragments larger than maxFragmentSize (512 Bytes), that have been received and discarded by a G.Bond/Eth port, during the current 1-day performance interval.
G32 hwGBondEthPortPerfCurr1DayRxLostEnds	1.3.6.1.4.1.2011.6.137.5.1.1.23	Gauge32	read-only	A read-only count of missing EndOfPacket indicators expected by the frame assembly function of a G.Bond/Eth port, during the current 1-day performance interval.
G32 hwGBondEthPortPerfCurr1DayRxLostFragments	1.3.6.1.4.1.2011.6.137.5.1.1.21	Gauge32	read-only	A read-only count of gaps in the sequence of fragments, expected by the frame assembly function of a G.Bond/Eth port, during the current 1-day performance interval.
G32 hwGBondEthPortPerfCurr1DayRxLostStarts	1.3.6.1.4.1.2011.6.137.5.1.1.22	Gauge32	read-only	A read-only count of missing StartOfPacket indicators expected by the frame assembly function of a G.Bond/Eth port, during the current 1-day performance interval.
G32 hwGBondEthPortPerfCurr1DayRxOverflows	1.3.6.1.4.1.2011.6.137.5.1.1.24	Gauge32	read-only	A read-only count of fragments that have been received and discarded by a G.Bond/Eth port, which would have caused the frame assembly buffer to overflow, during the current 1-day performance interval.
G32 hwGBondEthPortPerfCurr1DayRxSmallFragments	1.3.6.1.4.1.2011.6.137.5.1.1.18	Gauge32	read-only	A read-only count of fragments smaller than minFragmentSize (64 Bytes), that have been received and discarded by a G.Bond/Eth port, during the current 1-day performance interval.
DAT hwGBondEthPortPerfCurr1DayStartTime	1.3.6.1.4.1.2011.6.137.5.1.1.13	DateAndTime	read-only	Start time of the current 1-day statistics performance.
G32 hwGBondEthPortPerfCurr1DayTimeElapsed	1.3.6.1.4.1.2011.6.137.5.1.1.16	Gauge32	read-only	A read-only count of seconds that have elapsed since the beginning of the current 1-day performance interval.
hwGBondEthPortPerfCurrEntry	1.3.6.1.4.1.2011.6.137.5.1.1		not-accessible	This table contains current performance monitoring information for a G.Bond/Eth port. This table contains live data from the equipment and as such is not persistent. The index of this entry is hwGBondPriPort.
hwGBondEthPortPerfCurrTable	1.3.6.1.4.1.2011.6.137.5.1		not-accessible	This table contains current performance monitoring information for a G.Bond/Eth port. This table contains live data from the equipment and as such is not persistent. The index of this table is hwGBondPriPort.
G32 hwGBondEthPortPerfRxBadFragments	1.3.6.1.4.1.2011.6.137.5.1.1.28	Gauge32	read-only	A number of fragments which do not fit into the sequence expected by the frame assembly function, that have been received across the gamma interface and discarded (the frame buffer is flushed to the next valid frame start)
G32 hwGBondEthPortPerfRxErrors	1.3.6.1.4.1.2011.6.137.5.1.1.25	Gauge32	read-only	A number of fragments that have been received across the gamma interface and discarded.
G32 hwGBondEthPortPerfRxLargeFragments	1.3.6.1.4.1.2011.6.137.5.1.1.27	Gauge32	read-only	A number of fragments larger than maxFragmentSize (512 Bytes), which have been received across the gamma interface and discarded.
G32 hwGBondEthPortPerfRxLostEnds	1.3.6.1.4.1.2011.6.137.5.1.1.31	Gauge32	read-only	A number of missing EndOfPacket indicators expected by the frame assembly function.
G32 hwGBondEthPortPerfRxLostFragments	1.3.6.1.4.1.2011.6.137.5.1.1.29	Gauge32	read-only	A number of gaps in the sequence of fragments, which have been received across the gamma interface (the frame buffer is flushed to the next valid frame start, when fragment/fragments expected by the frame assembly function is/are not received).
G32 hwGBondEthPortPerfRxLostStarts	1.3.6.1.4.1.2011.6.137.5.1.1.30	Gauge32	read-only	A number of missing StartOfPacket indicators expected by the frame assembly function.
G32 hwGBondEthPortPerfRxOverflows	1.3.6.1.4.1.2011.6.137.5.1.1.32	Gauge32	read-only	A number of fragments, received across the gamma interface and discarded, which would have caused the frame assembly buffer to overflow.
G32 hwGBondEthPortPerfRxSmallFragments	1.3.6.1.4.1.2011.6.137.5.1.1.26	Gauge32	read-only	A number of fragments smaller than minFragmentSize (64 Bytes), that have been received across the gamma interface and discarded.
OCT hwGBondGroupCfgProf	1.3.6.1.4.1.2011.6.137.1.1.15	OCTET STRING	read-write	This object configures the bonding group profile name.
I32 hwGBondGroupID	1.3.6.1.4.1.2011.6.137.4.2	Integer32	accessible-for-notify	The bonding group ID.
INT hwGBondGroupProfBondCpeIncorrectAlarmSwitch	1.3.6.1.4.1.2011.6.137.6.1.16	INTEGER	read-create	This object enable/disable the bonding CPE incorrect alarm switch. Options: 1. enable(1) - The bonding CPE incorrect alarm switch is enabled 2. disable(2) - The bonding CPE incorrect alarm switch is disabled
hwGBondGroupProfEntry	1.3.6.1.4.1.2011.6.137.6.1		not-accessible	The table hwGBondGroupProfTable contains the bonding group profile configuration. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. The index of this entry is hwGBondGroupProfName.
INT hwGBondGroupProfLowRateCrossingEnable	1.3.6.1.4.1.2011.6.137.6.1.14	INTEGER	read-create	Indicates whether hwGBondLowUpRateCrossingAlarmTrap and hwGBondLowDownRateCrossingAlarmTrap notifications should be generated for this interface. Options: 1. enable(1) - Indicates that the notifications are enabled 2. disable(2) - Indicates that the notifications are disabled
G32 hwGBondGroupProfMaxDataRateDs	1.3.6.1.4.1.2011.6.137.6.1.9	Gauge32	read-create	This parameter specifics maximum data rate for the bearer channel in the downstream direction. The value of 0 means that the maximum downstream data rate is not fixed.
G32 hwGBondGroupProfMaxDataRateUs	1.3.6.1.4.1.2011.6.137.6.1.8	Gauge32	read-create	This parameter specifics maximum data rate for the bearer channel in the upstream direction. The value of 0 means that the maximum upstream data rate is not fixed.
G32 hwGBondGroupProfMaxDelayDs	1.3.6.1.4.1.2011.6.137.6.1.3	Gauge32	read-create	This parameter is the maximum one-way interleaving delay introduced by the PMS-TC on downstream direction.
G32 hwGBondGroupProfMaxDelayUs	1.3.6.1.4.1.2011.6.137.6.1.2	Gauge32	read-create	This parameter is the maximum one-way interleaving delay introduced by the PMS-TC on upstream direction.
G32 hwGBondGroupProfMinDataRateDs	1.3.6.1.4.1.2011.6.137.6.1.7	Gauge32	read-create	This parameter specifics minimum data rate for the bearer channel in the downstream direction. The value of 0 means that the minimum downstream data rate is not fixed.
G32 hwGBondGroupProfMinDataRateUs	1.3.6.1.4.1.2011.6.137.6.1.6	Gauge32	read-create	This parameter specifics minimum data rate for the bearer channel in the upstream direction. The value of 0 means that the minimum upstream data rate is not fixed.
GBO hwGBondGroupProfMinProtectionDs	1.3.6.1.4.1.2011.6.137.6.1.5	GBondSymbolProtection	read-create	This parameter is minimum impulse noise protection for the bearer channel in the downstream direction, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol.
GBO hwGBondGroupProfMinProtectionUs	1.3.6.1.4.1.2011.6.137.6.1.4	GBondSymbolProtection	read-create	This parameter is minimum impulse noise protection for the bearer channel in the upstream direction, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol.
OCT hwGBondGroupProfName	1.3.6.1.4.1.2011.6.137.6.1.1	OCTET STRING	not-accessible	This object identifies a row in this table.
ROW hwGBondGroupProfRowStatus	1.3.6.1.4.1.2011.6.137.6.1.15	RowStatus	read-create	This object is used to create a new row or delete an existing row in this table. Before a profile can be deleted, it must be not referenced from all associated bonding group.
hwGBondGroupProfTable	1.3.6.1.4.1.2011.6.137.6		not-accessible	The table hwGBondGroupProfTable contains the bonding group profile configuration. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. The index of this table is hwGBondGroupProfName.
G32 hwGBondGroupProfTargetDataRateDs	1.3.6.1.4.1.2011.6.137.6.1.11	Gauge32	read-create	A desired G.Bond port data rate in the downstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member BCEs by their respective configuration settings. This object represents a sum of individual BCE downstream data rates, modified to compensate for fragmentation and encapsulation overhead (e.g., for an Ethernet service, the target data rate of 10Mbps shall allow lossless transmission of full-duplex 10Mbps Ethernet frame stream with minimal inter-frame gap). The value between 64 and 200000 indicates that the total downstream data rate of the G.Bond port after initialization SHALL be equal to the target data rate or less, if the target downstream data rate cannot be achieved under the restrictions configured for BCEs. In case the copper environment allows to achieve higher downstream data rate than that specified by this object, the excess capability shall be either converted to additional SNR margin or reclaimed by minimizing transmit power. The value of 0 means that the target data rate is not fixed and SHALL be set to the maximum attainable rate during initialization (Best Effort), under specified spectral restrictions and with desired SNR Margin per BCE.
G32 hwGBondGroupProfTargetDataRateUs	1.3.6.1.4.1.2011.6.137.6.1.10	Gauge32	read-create	A desired G.Bond port data rate in the upstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member BCEs by their respective configuration settings. This object represents a sum of individual BCE upstream data rates, modified to compensate for fragmentation and encapsulation overhead (e.g., for an Ethernet service, the target data rate of 10Mbps shall allow lossless transmission of full-duplex 10Mbps Ethernet frame stream with minimal inter-frame gap). The value between 64 and 200000 indicates that the total upstream data rate of the G.Bond port after initialization SHALL be equal to the target data rate or less, if the target upstream data rate cannot be achieved under the restrictions configured for BCEs. In case the copper environment allows to achieve higher upstream data rate than that specified by this object, the excess capability shall be either converted to additional SNR margin or reclaimed by minimizing transmit power. The value of 0 means that the target data rate is not fixed and SHALL be set to the maximum attainable rate during initialization (Best Effort), under specified spectral restrictions and with desired SNR Margin per BCE.
G32 hwGBondGroupProfThreshLowDataRateDs	1.3.6.1.4.1.2011.6.137.6.1.13	Gauge32	read-create	This object configures the G.Bond port low downstream rate crossing alarm threshold. The value of 0 means that the low downstream data rate is not fixed.
G32 hwGBondGroupProfThreshLowDataRateUs	1.3.6.1.4.1.2011.6.137.6.1.12	Gauge32	read-create	This object configures the G.Bond port low upstream rate crossing alarm threshold. The value of 0 means that the low upstream data rate is not fixed.
NTF hwGBondInvalidCpeAlarmTrap	1.3.6.1.4.1.2011.6.137.3.2.0.3			This notification indicates that the G.Bond port connects with a invalid CPE.
NTF hwGBondLowDownRateCrossingAlarmTrap	1.3.6.1.4.1.2011.6.137.3.2.0.2			This notification indicates that the G.Bond port downstream data rate has reached/dropped below or exceeded the low downstream rate threshold.
INT hwGBondLowRateCrossingEnable	1.3.6.1.4.1.2011.6.137.1.1.9	INTEGER	read-write	Indicates whether gBondLowUpRateCrossing and gBondLowDownRateCrossing notifications should be generated for this interface. Options: 1. disable(1) - Indicates that the notifications are disabled 2. enable(2) - Indicates that the notifications are enabled This object is read-write for the -O subtype G.Bond ports and irrelevant for the -R subtypes. This object must be maintained in a persistent manner. This object maps to the TR-159 attribute aGroupLowRateCrossingEnable. This object is deprecated in favour of hwGBondGroupProfLowRateCrossingEnable.
NTF hwGBondLowUpRateCrossingAlarmTrap	1.3.6.1.4.1.2011.6.137.3.2.0.1			This notification indicates that the G.Bond port upstream data rate has reached/dropped below or exceeded the low upstream rate threshold.
U32 hwGBondNumBCEs	1.3.6.1.4.1.2011.6.137.2.1.3	Unsigned32	read-only	The Number of BCEs that is currently aggregated by the local GBS (assigned to the G.Bond port using ifStackTable). This number is never greater than gBondCapacity. This object shall be automatically incremented or decremented when a BCE is added or deleted to/from the G.Bond port using ifStackTable. This object maps to the TR-159 attribute aGroupNumChannels.
DAT hwGBondOperLastDownTime	1.3.6.1.4.1.2011.6.137.2.1.14	DateAndTime	read-only	Bonding group last down time.
DAT hwGBondOperLastUpTime	1.3.6.1.4.1.2011.6.137.2.1.13	DateAndTime	read-only	Bonding group last up time.
U32 hwGBondOperReInits	1.3.6.1.4.1.2011.6.137.2.1.15	Unsigned32	read-only	Bonding group re-initial counters.
GBO hwGBondOperScheme	1.3.6.1.4.1.2011.6.137.2.1.12	GBondScheme	read-only	Current operating bonding scheme of a G.Bond port. Options: 1. g9981(1) - Instructs the port to use G.998.1 bonding 2. g9982(2) - Instructs the port to use G.998.2 bonding 3. g9983(3) - Instructs the port to use G.998.3 bonding
INT hwGBondOperStatus	1.3.6.1.4.1.2011.6.137.2.1.16	INTEGER	read-only	The current operational state of the xdsl bonding-group. Options: 1. activated(1) - The value of activated(1) indicates that the operational packets can be passed. 2. activating(2) - The value of activating(2) should be a transient condition before changing to activated, and the operational packets cannot be passed. 3. deactivated(3) - The value of deactivated(3) indicates that the operational packets cannot be passed.
GBO hwGBondPeerAdminScheme	1.3.6.1.4.1.2011.6.137.1.1.3	GBondScheme	read-write	A desired bonding peer scheme for a bonding group. The port to use corresponding bonding scheme if supported. Options: 1. g9981(1) - Instructs the port to use G.998.1 bonding 2. g9982(2) - Instructs the port to use G.998.2 bonding 3. g9983(3) - Instructs the port to use G.998.3 bonding The hwGBondPeerAdminScheme changes must be performed when the admin status of the bonding group is deactivated.
hwGBondPortStatusEntry	1.3.6.1.4.1.2011.6.137.2.1		not-accessible	This table provides overall status information of G.Bond ports, complementing the generic status information from the ifTable of IF-MIB. Additional status information about connected BCEs is available from the relevant line MIBs. This table contains live data from the equipment. As such, it is not persistent. The index of this entry is hwGBondPriPort.
hwGBondPortStatusTable	1.3.6.1.4.1.2011.6.137.2		not-accessible	This table provides overall status information of G.Bond ports, complementing the generic status information from the ifTable of IF-MIB. Additional status information about connected BCEs is available from the relevant line MIBs. This table contains live data from the equipment. As such, it is not persistent. The index of this table is hwGBondPriPort.
INT hwGBondPrimaryStatus	1.3.6.1.4.1.2011.6.137.1.1.13	INTEGER	read-only	The primary status of the bonding group. This parameter indicates the current overall service condition of an entity, i.e., whether it is in-service or out-of-service. Options: 1. is-nr(1) - In service, normal 2. is-anr(2) - In service, abnormal 3. is-rst(3) - In service, restricted 4. is-anrst(4) - In service, abnormal & restricted 5. oos-au(5) - Out of service, autonomous 6. oos-ma(6) - Out of service, management 7. oos-auma(7) - Out of service, autonomous & management 8. oos-aurst(8) - Out of service, autonomous & restricted 9. oos-maanr(9) - Out of service, management & abnormal
NUM hwGBondPriPort	1.3.6.1.4.1.2011.6.137.1.1.1	InterfaceIndex	not-accessible	Index of the bonding group, which should be equal to the ifindex of the primary port.
I32 hwGBondProfileID	1.3.6.1.4.1.2011.6.137.4.1	Integer32	accessible-for-notify	The bonding group profile ID.
ROW hwGBondRowStatus	1.3.6.1.4.1.2011.6.137.1.1.12	RowStatus	read-write	This object is used to create a new row or delete an existing row in this table. The bonding group can not be deleted when service configured on this group.
BIT hwGBondSecondaryStatus	1.3.6.1.4.1.2011.6.137.1.1.14	Bits	read-only	This parameter indicates the secondary status of the bonding group. The parameter provides additional information pertaining to PST and PSTQ. For example, it may indicate the type and reason of the external command, the event that occurred in the Network Element, etc. Multiple values may apply to an entity at a given moment. The highest bit of SST value indicates the sst-ains(0) status; the second highest bit of SST value indicates the sst-faf(1) status, and the rest can be deduced by analogy. This BITS structure can report the following status: 1. sst-ains(0) - This bit position positively reports that the status of the board is automatic in-service 2. sst-faf(1) - Facility failure 3. sst-flt(2) - Fault 4. sst-lpbk(3) - Loopback 5. sst-mea(4) - Mismatch of equipment and attributes 6. sst-sgeo(5) - Supporting entity outage 7. sst-stbyh(6) - Standby-hot 8. sst-ts(7) - Test 9. sst-uas(8) - Unassigned 10. sst-ueq(9) - Unequipped 11. sst-wrk(10) - Working 12. sst-pwr(11) - Power
U32 hwGBondTargetDownDataRate	1.3.6.1.4.1.2011.6.137.1.1.6	Unsigned32	read-write	A desired bonding group data rate in the downstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member ports by their respective configuration settings. This object is deprecated in favour of hwGBondGroupProfTargetDataRateDs.
U32 hwGBondTargetUpDataRate	1.3.6.1.4.1.2011.6.137.1.1.5	Unsigned32	read-write	A desired bonding group data rate in the upstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member ports by their respective configuration settings. This object is deprecated in favour of hwGBondGroupProfTargetDataRateUs.
U32 hwGBondThreshLowDownRate	1.3.6.1.4.1.2011.6.137.1.1.8	Unsigned32	read-write	This object configures the bonding group low downstream rate crossing alarm threshold. This object is deprecated in favour of hwGBondGroupProfThreshLowDataRateDs.
U32 hwGBondThreshLowUpRate	1.3.6.1.4.1.2011.6.137.1.1.7	Unsigned32	read-write	This object configures the bonding group low upstream rate crossing alarm threshold. This object is deprecated in favour of hwGBondGroupProfThreshLowDataRateUs.
hwGBondTraps	1.3.6.1.4.1.2011.6.137.3
hwGBondTrapsVbOids	1.3.6.1.4.1.2011.6.137.4
I32 hwGBondUpDataRate	1.3.6.1.4.1.2011.6.137.2.1.1	Integer32	read-only	A current G.Bond port operational data rate in the upstream direction, in bps. This object represents an estimation of the sum of individual BCE upstream data rates, modified to compensate for fragmentation and encapsulation overhead(e.g., for an ethernet service, the target data rate of 10Mbps shall allow lossless transmission of full-duplex 10Mbps ethernet frame stream with minimal inter-frame gap).

RFC description

Huawei-private MIB for G.Bond multilink bonding management and configuration.

Start monitoring Huawei DSLAM/MSAN broadband access platform (G.Bond DSL pair bonding) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-GBOND-MIB

What Is HUAWEI-GBOND-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description