AC-ModularGW-MIB

All MIBs › AC-ModularGW-MIB

Organization: AudioCodes Ltd

Last Updated: 2006-08-15

Category: Hardware and Environment, Telephony and VoIP, Vendor: AudioCodes

Description: Provides management objects for AudioCodes modular gateway chassis, covering hardware module configuration, status, and inter-blade communication.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AC-ModularGW-MIB?

AC-ModularGW-MIB is a vendor MIB from AudioCodes that duplicates (with differing capitalization) the AC-MODULAR-GATEWAY-MIB's role, providing management objects for AudioCodes modular gateway chassis, covering hardware module configuration, status, and inter-blade communication, along with cross-reference tables linking analog/digital ports to their hosting modules. It exposes hardware-inventory and status categories similar to its counterpart: blade/module presence, slot assignment, and port-to-module mapping. Its monitoring value is centered on hardware status: confirming blades are present and operational in each chassis slot and tracing port issues to a specific module. Per its own description, this MIB was deprecated as of version 5.2 and became obsolete at version 5.4, indicating dependency on newer AudioCodes gateway management MIBs going forward. It was used on legacy AudioCodes modular voice gateway chassis deployments prior to their replacement by updated platforms/MIBs. Engineers can download the AC-ModularGW-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AC-ModularGW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

AudioCodes modular media gateway (deprecated platform)

Monitoring Examples

No concrete sample objects were supplied for this module; conceptually an administrator would use its module/port cross-reference tables to confirm all expected blades are present and functioning in a chassis and to trace a failing port to its hosting module, but naming exact objects here would be speculative given the module has been deprecated/obsoleted.

Imported Objects

From RFC1155-SMI

IpAddress

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
TAddress
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
audioCodes	1.3.6.1.4.1.5003
acRegistrations	1.3.6.1.4.1.5003.7
acGeneric	1.3.6.1.4.1.5003.8
acProducts	1.3.6.1.4.1.5003.9
acBoardMibs	1.3.6.1.4.1.5003.9.10
acModularGateway	1.3.6.1.4.1.5003.9.10.11			This MIB is solely for AudioCodes� modular Gateways. Use this MIB�s status section for cross reference tables connecting analog/digital ports to the modules on which they are. The MIB has become deprecated as of version 5.2. It will be obsolete as of version 5.4
acModularGatewayConfiguration	1.3.6.1.4.1.5003.9.10.11.1
acModularGatewayStatus	1.3.6.1.4.1.5003.9.10.11.2
acModularGWModules	1.3.6.1.4.1.5003.9.10.11.2.1
acModularGWModuleTable	1.3.6.1.4.1.5003.9.10.11.2.1.20		not-accessible	This table holds the information about each module in Audiocodes' modular gateways. If an index (Module number) is shown - then the module is in and working. You can also see the modules type, number of ports and it's first port's logical number allowing you to calculate which port is which logical trunk or analog channel. (This information is also obtainable in the acModularGWTrunkTable and acModularGWChannelTable).
acModularGWModuleEntry	1.3.6.1.4.1.5003.9.10.11.2.1.20.1		not-accessible
INT acModularGWModuleIndex	1.3.6.1.4.1.5003.9.10.11.2.1.20.1.1	INTEGER	not-accessible	Module index. 1 is the first Module - top left corner. 2 is the next Module to the right and so on. 4 is under 1.
INT acModularGWModuleType	1.3.6.1.4.1.5003.9.10.11.2.1.20.1.2	INTEGER	read-only	Module Type. The Modules are characterized according to their ports. 0 = Digital - Quad. 1 = Analog - FXS. 2 = Analog - FXO. 4 = Digital - FALC.
INT acModularGWModuleNumOfPorts	1.3.6.1.4.1.5003.9.10.11.2.1.20.1.3	INTEGER	read-only	The number of physical interfaces in a module, analog or digital.
INT acModularGWModuleFirstPortNum	1.3.6.1.4.1.5003.9.10.11.2.1.20.1.4	INTEGER	read-only	The logical number as seen in the general trunk/analog-channel table of the first port in the module in question. Since analog and digital ports can be operational at once, analog and digital ports may have same logical number.
acModularGWCrossReference	1.3.6.1.4.1.5003.9.10.11.2.2
acModularGWTrunkTable	1.3.6.1.4.1.5003.9.10.11.2.2.20		not-accessible	This table shows the trunk location and type.
acModularGWTrunkEntry	1.3.6.1.4.1.5003.9.10.11.2.2.20.1		not-accessible
INT acModularGWTrunkIndex	1.3.6.1.4.1.5003.9.10.11.2.2.20.1.1	INTEGER	not-accessible	Trunk index. The trunk in question's logical number.
INT acModularGWTrunkOnModuleNum	1.3.6.1.4.1.5003.9.10.11.2.2.20.1.2	INTEGER	read-only	Module number on which the trunk in question is placed. 1 is the first Module - top left corner. 2 is the next Module to the right and so on. 4 is under 1.
INT acModularGWTrunkOnPortNum	1.3.6.1.4.1.5003.9.10.11.2.2.20.1.3	INTEGER	read-only	Physical Port on module. 1 - left most port.
acModularGWAnalogPortTable	1.3.6.1.4.1.5003.9.10.11.2.2.21		not-accessible	This table shows the analog port location and type.
acModularGWAnalogPortEntry	1.3.6.1.4.1.5003.9.10.11.2.2.21.1		not-accessible
INT acModularGWAnalogPortIndex	1.3.6.1.4.1.5003.9.10.11.2.2.21.1.1	INTEGER	not-accessible	Channel index. The channel in question's logical number.
INT acModularGWAnalogPortOnModuleNum	1.3.6.1.4.1.5003.9.10.11.2.2.21.1.2	INTEGER	read-only	Module number on which the analog port in question is placed. 1 is the first Module - top left corner. 2 is the next Module to the right and so on. 4 is under 1.
INT acModularGWAnalogPortOnPortNum	1.3.6.1.4.1.5003.9.10.11.2.2.21.1.3	INTEGER	read-only	Physical port on module. 1 - left most port.
acModularGatewayAction	1.3.6.1.4.1.5003.9.10.11.3

RFC description

AudioCodes modular media gateway vendor-private MIB for managing analog/digital ports, modules, and gateway configuration (deprecated as of version 5.2).

Start monitoring AudioCodes Modular Gateway (deprecated platform) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AC-ModularGW-MIB

What Is AC-ModularGW-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description