All MIBs › HUAWEI-EASY-OPERATION-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2014-09-09
Category: Device Management, Domain: Network Management, Vendor: Huawei
Description: Huawei easy operation MIB providing simplified configuration and management objects for quick deployment of common network services.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-EASY-OPERATION-MIB?
HUAWEI-EASY-OPERATION-MIB is a Huawei-proprietary MIB supporting Huawei's 'Easy Operation' feature set, which provides simplified, wizard-like configuration and management objects for quickly deploying common network services without needing to configure many individual low-level MIBs. It exposes higher-level configuration objects that map to common service templates or quick-deployment profiles rather than granular protocol-level detail. Its monitoring value is mainly around confirming that a simplified deployment profile was applied successfully and remains active, giving a coarse view of service-configuration status rather than detailed hardware/software fault telemetry. It sits as a convenience layer above Huawei's standard configuration MIBs for the underlying services it simplifies. It is deployed on Huawei enterprise switches/routers aimed at simplifying initial setup in SMB or branch deployments, and administrators typically start with a HUAWEI-EASY-OPERATION-MIB download to load the module into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-EASY-OPERATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei enterprise switch or router
Monitoring Examples
An administrator would poll an easy-operation status object to confirm which quick-deployment template (e.g. a basic VLAN/QoS profile) is currently active on the device, and would notice a configuration drift if the reported active template no longer matches what was originally applied. No sample_objects were provided for this module, so specific object names are inferred rather than confirmed from source.
What Can Be Monitored
- active easy-operation deployment profile
- quick-configuration status
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From P-BRIDGE-MIB
| EnabledStatus |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwEasyOperationMIB | 1.3.6.1.4.1.2011.5.25.311 | Huawei Easy Opearation MIB. | ||
| hwEasyOperationGlobalObjects | 1.3.6.1.4.1.2011.5.25.311.1 | |||
| ENA hwEasyOperationCommanderEnable | 1.3.6.1.4.1.2011.5.25.311.1.1 | EnabledStatus | read-write | This object specifies the Easy Operation Commander operation mode. |
| IP hwEasyOperationCommanderIpAddress | 1.3.6.1.4.1.2011.5.25.311.1.2 | InetAddress | read-write | The IP address of commander. |
| IPt hwEasyOperationCommanderIpAddressType | 1.3.6.1.4.1.2011.5.25.311.1.3 | InetAddressType | read-write | The IP address type of commander. |
| I32 hwEasyOperationCommanderUdpPort | 1.3.6.1.4.1.2011.5.25.311.1.4 | Integer32 | read-write | The UDP port of commander. |
| INT hwEasyOperationServerType | 1.3.6.1.4.1.2011.5.25.311.1.5 | INTEGER | read-write | The type of file server. |
| IP hwEasyOperationServerIpAddress | 1.3.6.1.4.1.2011.5.25.311.1.6 | InetAddress | read-write | The IP address of file server. |
| IPt hwEasyOperationServerIpAddressType | 1.3.6.1.4.1.2011.5.25.311.1.7 | InetAddressType | read-write | The IP address type of file server. |
| I32 hwEasyOperationServerPort | 1.3.6.1.4.1.2011.5.25.311.1.8 | Integer32 | read-write | The port number of file server. |
| ENA hwEasyOperationAutoClearEnable | 1.3.6.1.4.1.2011.5.25.311.1.9 | EnabledStatus | read-write | Whether client would clear the old software file when the free space is not enough. |
| INT hwEasyOperationActivateMode | 1.3.6.1.4.1.2011.5.25.311.1.10 | INTEGER | read-write | The mode of activating file. |
| I32 hwEasyOperationActivateDelayTime | 1.3.6.1.4.1.2011.5.25.311.1.11 | Integer32 | read-write | The delay time of activating file.The unit is second(s). |
| STR hwEasyOperationActivateInTime | 1.3.6.1.4.1.2011.5.25.311.1.12 | DisplayString | read-write | The specific time of activating file. |
| INT hwEasyOperationBackupConfigMode | 1.3.6.1.4.1.2011.5.25.311.1.13 | INTEGER | read-write | The mode of file created on the server. |
| I32 hwEasyOperationBackupConfigInterval | 1.3.6.1.4.1.2011.5.25.311.1.14 | Integer32 | read-write | The interval of configuration backup .The unit is hour(s) |
| STR hwEasyOperationDefaultSysSoftware | 1.3.6.1.4.1.2011.5.25.311.1.15 | DisplayString | read-write | The default name of software file. |
| STR hwEasyOperationDefaultSysSoftwareVer | 1.3.6.1.4.1.2011.5.25.311.1.16 | DisplayString | read-write | The version of default software file. |
| STR hwEasyOperationDefaultConfig | 1.3.6.1.4.1.2011.5.25.311.1.17 | DisplayString | read-write | The default name of configuration file. |
| STR hwEasyOperationDefaultPatch | 1.3.6.1.4.1.2011.5.25.311.1.18 | DisplayString | read-write | The default name of patch file. |
| STR hwEasyOperationDefaultWebfile | 1.3.6.1.4.1.2011.5.25.311.1.19 | DisplayString | read-write | The default name of WEB file. |
| STR hwEasyOperationDefaultLicense | 1.3.6.1.4.1.2011.5.25.311.1.20 | DisplayString | read-write | The default name of license file. |
| STR hwEasyOperationDefaultCustomfile1 | 1.3.6.1.4.1.2011.5.25.311.1.21 | DisplayString | read-write | The default name of custom file. |
| STR hwEasyOperationDefaultCustomfile2 | 1.3.6.1.4.1.2011.5.25.311.1.22 | DisplayString | read-write | The default name of custom file. |
| STR hwEasyOperationDefaultCustomfile3 | 1.3.6.1.4.1.2011.5.25.311.1.23 | DisplayString | read-write | The default name of custom file. |
| ENA hwEasyOperationClientAutoJoinEnable | 1.3.6.1.4.1.2011.5.25.311.1.24 | EnabledStatus | read-write | Whether commander can receive the information of new clients. |
| ENA hwEasyOperationTopologyEnable | 1.3.6.1.4.1.2011.5.25.311.1.25 | EnabledStatus | read-write | Whether commander can collect the topology information of new clients. |
| I32 hwEasyOperationClientAgingTime | 1.3.6.1.4.1.2011.5.25.311.1.26 | Integer32 | read-write | The aging time of client which is lost. The unit is hour(s). |
| hwEasyOperationGroup | 1.3.6.1.4.1.2011.5.25.311.2 | |||
| I32 hwEasyOperationTotalGroupNumber | 1.3.6.1.4.1.2011.5.25.311.2.1 | Integer32 | read-only | The total number of group. |
| I32 hwEasyOperationBuildInGroupNumber | 1.3.6.1.4.1.2011.5.25.311.2.2 | Integer32 | read-only | The number of build-in group. |
| I32 hwEasyOperationCustomGroupNumber | 1.3.6.1.4.1.2011.5.25.311.2.3 | Integer32 | read-only | The number of custom group. |
| hwEasyOperationGroupTable | 1.3.6.1.4.1.2011.5.25.311.2.4 | not-accessible | Group table. | |
| hwEasyOperationGroupEntry | 1.3.6.1.4.1.2011.5.25.311.2.4.1 | not-accessible | The entry of group table. | |
| I32 hwEasyOperationGroupIndex | 1.3.6.1.4.1.2011.5.25.311.2.4.1.1 | Integer32 | not-accessible | The index of group table. |
| INT hwEasyOperationGroupType | 1.3.6.1.4.1.2011.5.25.311.2.4.1.2 | INTEGER | read-create | The type of group. |
| STR hwEasyOperationGroupName | 1.3.6.1.4.1.2011.5.25.311.2.4.1.3 | DisplayString | read-create | The name of group. |
| STR hwEasyOperationGroupSysSoftware | 1.3.6.1.4.1.2011.5.25.311.2.4.1.4 | DisplayString | read-create | The software file name of group. |
| STR hwEasyOperationGroupSysSoftwareVer | 1.3.6.1.4.1.2011.5.25.311.2.4.1.5 | DisplayString | read-create | The software version of group. |
| STR hwEasyOperationGroupConfig | 1.3.6.1.4.1.2011.5.25.311.2.4.1.6 | DisplayString | read-create | The configuration file name of group. |
| STR hwEasyOperationGroupPatch | 1.3.6.1.4.1.2011.5.25.311.2.4.1.7 | DisplayString | read-create | The patch file name of group. |
| STR hwEasyOperationGroupWebfile | 1.3.6.1.4.1.2011.5.25.311.2.4.1.8 | DisplayString | read-create | The WEB file name of group. |
| STR hwEasyOperationGroupLicense | 1.3.6.1.4.1.2011.5.25.311.2.4.1.9 | DisplayString | read-create | The license file name of group. |
| STR hwEasyOperationGroupCustomfile1 | 1.3.6.1.4.1.2011.5.25.311.2.4.1.10 | DisplayString | read-create | The custom file name of group. |
| STR hwEasyOperationGroupCustomfile2 | 1.3.6.1.4.1.2011.5.25.311.2.4.1.11 | DisplayString | read-create | The custom file name of group. |
| STR hwEasyOperationGroupCustomfile3 | 1.3.6.1.4.1.2011.5.25.311.2.4.1.12 | DisplayString | read-create | The custom file name of group. |
| INT hwEasyOperationGroupActivateMode | 1.3.6.1.4.1.2011.5.25.311.2.4.1.13 | INTEGER | read-create | The mode of activating file of group. |
| I32 hwEasyOperationGroupActivateDelayTime | 1.3.6.1.4.1.2011.5.25.311.2.4.1.14 | Integer32 | read-create | The delay time of activating file of group.The unit is second(s) |
| STR hwEasyOperationGroupActivateInTime | 1.3.6.1.4.1.2011.5.25.311.2.4.1.15 | DisplayString | read-create | The specific time of activating file of group. |
| ROW hwEasyOperationGroupRowStatus | 1.3.6.1.4.1.2011.5.25.311.2.4.1.50 | RowStatus | read-create | The RowStatus of group table. |
| hwEasyOperationGroupMatchTable | 1.3.6.1.4.1.2011.5.25.311.2.5 | not-accessible | The match rule of group. | |
| hwEasyOperationGroupMatchEntry | 1.3.6.1.4.1.2011.5.25.311.2.5.1 | not-accessible | The entry of match rule of group. | |
| I32 hwEasyOperationGroupMatchIndex | 1.3.6.1.4.1.2011.5.25.311.2.5.1.1 | Integer32 | not-accessible | The index of match rule table. |
| MAC hwEasyOperationGroupMatchMacAddress | 1.3.6.1.4.1.2011.5.25.311.2.5.1.2 | MacAddress | read-create | The match rule of MAC address. |
| I32 hwEasyOperationGroupMatchMacMask | 1.3.6.1.4.1.2011.5.25.311.2.5.1.3 | Integer32 | read-create | The match rule of mask of MAC address. |
| STR hwEasyOperationGroupMatchEsn | 1.3.6.1.4.1.2011.5.25.311.2.5.1.4 | DisplayString | read-create | The match rule of ESN. |
| STR hwEasyOperationGroupMatchModel | 1.3.6.1.4.1.2011.5.25.311.2.5.1.5 | DisplayString | read-create | The match rule of model of device. |
| STR hwEasyOperationGroupMatchDeviceType | 1.3.6.1.4.1.2011.5.25.311.2.5.1.6 | DisplayString | read-create | The match rule of type of device. |
| IP hwEasyOperationGroupMatchIpAddress | 1.3.6.1.4.1.2011.5.25.311.2.5.1.7 | InetAddress | read-create | The match rule of IP address. |
| IPt hwEasyOperationGroupMatchIpAddressType | 1.3.6.1.4.1.2011.5.25.311.2.5.1.8 | InetAddressType | read-create | The match rule of type of IP address. |
| I32 hwEasyOperationGroupMatchIpAddressMask | 1.3.6.1.4.1.2011.5.25.311.2.5.1.9 | Integer32 | read-create | The match rule of mask of IP address. |
| ROW hwEasyOperationGroupMatchRowStatus | 1.3.6.1.4.1.2011.5.25.311.2.5.1.50 | RowStatus | read-create | The RowStatus of match rule table. |
| hwEasyOperationClient | 1.3.6.1.4.1.2011.5.25.311.5 | |||
| I32 hwEasyOperationClientNumber | 1.3.6.1.4.1.2011.5.25.311.5.1 | Integer32 | read-only | The number of client. |
| hwEasyOperationClientInfoTable | 1.3.6.1.4.1.2011.5.25.311.5.2 | not-accessible | The client table. | |
| hwEasyOperationClientInfoEntry | 1.3.6.1.4.1.2011.5.25.311.5.2.1 | not-accessible | The entry of client table. | |
| I32 hwEasyOperationClientInfoClientIndex | 1.3.6.1.4.1.2011.5.25.311.5.2.1.1 | Integer32 | not-accessible | The index of client table. |
| MAC hwEasyOperationClientInfoClientMacAddress | 1.3.6.1.4.1.2011.5.25.311.5.2.1.2 | MacAddress | read-create | The MAC address of client. |
| STR hwEasyOperationClientInfoClientEsn | 1.3.6.1.4.1.2011.5.25.311.5.2.1.3 | DisplayString | read-create | The ESN of client. |
| STR hwEasyOperationClientInfoClientHostName | 1.3.6.1.4.1.2011.5.25.311.5.2.1.4 | DisplayString | read-only | The host name of client. |
| IP hwEasyOperationClientInfoClientIpAddress | 1.3.6.1.4.1.2011.5.25.311.5.2.1.5 | InetAddress | read-create | The IP address of client. |
| IPt hwEasyOperationClientInfoClientIpAddressType | 1.3.6.1.4.1.2011.5.25.311.5.2.1.6 | InetAddressType | read-create | The IP address type of client. |
| STR hwEasyOperationClientInfoClientModel | 1.3.6.1.4.1.2011.5.25.311.5.2.1.7 | DisplayString | read-only | The model of client. |
| STR hwEasyOperationClientInfoClientDeviceType | 1.3.6.1.4.1.2011.5.25.311.5.2.1.8 | DisplayString | read-only | The device type of client. |
| STR hwEasyOperationClientInfoClientSysSoftware | 1.3.6.1.4.1.2011.5.25.311.5.2.1.9 | DisplayString | read-only | The startup software file name of client. |
| STR hwEasyOperationClientInfoClientSysSoftwareVer | 1.3.6.1.4.1.2011.5.25.311.5.2.1.10 | DisplayString | read-only | The startup software version of client. |
| STR hwEasyOperationClientInfoClientSysConfig | 1.3.6.1.4.1.2011.5.25.311.5.2.1.11 | DisplayString | read-only | The startup configuration file name of client. |
| STR hwEasyOperationClientInfoClientSysPatch | 1.3.6.1.4.1.2011.5.25.311.5.2.1.12 | DisplayString | read-only | The startup patch file name of client. |
| STR hwEasyOperationClientInfoClientSysWebFile | 1.3.6.1.4.1.2011.5.25.311.5.2.1.13 | DisplayString | read-only | The startup WEB file name of client. |
| STR hwEasyOperationClientInfoClientSysLicense | 1.3.6.1.4.1.2011.5.25.311.5.2.1.14 | DisplayString | read-only | The startup license file name of client. |
| STR hwEasyOperationClientInfoClientDownloadSoftware | 1.3.6.1.4.1.2011.5.25.311.5.2.1.15 | DisplayString | read-create | The software file name of client in downloading status. |
| STR hwEasyOperationClientInfoClientDownloadSoftwareVer | 1.3.6.1.4.1.2011.5.25.311.5.2.1.16 | DisplayString | read-create | The software version of client in downloading status. |
| STR hwEasyOperationClientInfoClientDownloadConfig | 1.3.6.1.4.1.2011.5.25.311.5.2.1.17 | DisplayString | read-create | The configuration file name of client in downloading status. |
| STR hwEasyOperationClientInfoClientDownloadPatch | 1.3.6.1.4.1.2011.5.25.311.5.2.1.18 | DisplayString | read-create | The patch file name of client in downloading status. |
| STR hwEasyOperationClientInfoClientDownloadWebFile | 1.3.6.1.4.1.2011.5.25.311.5.2.1.19 | DisplayString | read-create | The WEB file name of client in downloading status. |
| STR hwEasyOperationClientInfoClientDownloadLicense | 1.3.6.1.4.1.2011.5.25.311.5.2.1.20 | DisplayString | read-create | The license file name of client in downloading status. |
| STR hwEasyOperationClientInfoClientDownloadCustomfile1 | 1.3.6.1.4.1.2011.5.25.311.5.2.1.21 | DisplayString | read-create | The custom file name of client in downloading status. |
| STR hwEasyOperationClientInfoClientDownloadCustomfile2 | 1.3.6.1.4.1.2011.5.25.311.5.2.1.22 | DisplayString | read-create | The custom file name of client in downloading status. |
| STR hwEasyOperationClientInfoClientDownloadCustomfile3 | 1.3.6.1.4.1.2011.5.25.311.5.2.1.23 | DisplayString | read-create | The custom file name of client in downloading status. |
| INT hwEasyOperationClientInfoClientMethod | 1.3.6.1.4.1.2011.5.25.311.5.2.1.24 | INTEGER | read-only | The method of upgrading. |
| INT hwEasyOperationClientInfoClientPhase | 1.3.6.1.4.1.2011.5.25.311.5.2.1.25 | INTEGER | read-only | The downloading phase of client. |
| INT hwEasyOperationClientInfoClientOperateState | 1.3.6.1.4.1.2011.5.25.311.5.2.1.26 | INTEGER | read-only | The file type in downloading. |
| I32 hwEasyOperationClientInfoClientDownloadPercent | 1.3.6.1.4.1.2011.5.25.311.5.2.1.27 | Integer32 | read-only | The percentage of file downloading. |
| I32 hwEasyOperationClientInfoClientErrorReason | 1.3.6.1.4.1.2011.5.25.311.5.2.1.28 | Integer32 | read-only | The error reason in processing. |
| STR hwEasyOperationClientInfoClientErrorDescr | 1.3.6.1.4.1.2011.5.25.311.5.2.1.29 | DisplayString | read-only | The error description in processing. |
| I32 hwEasyOperationClientInfoClientBackupErrorReason | 1.3.6.1.4.1.2011.5.25.311.5.2.1.30 | Integer32 | read-only | The error reason in backup configuration. |
| STR hwEasyOperationClientInfoClientBackupErrorDescr | 1.3.6.1.4.1.2011.5.25.311.5.2.1.31 | DisplayString | read-only | The error description in backup configuration. |
| INT hwEasyOperationClientInfoClientRunState | 1.3.6.1.4.1.2011.5.25.311.5.2.1.32 | INTEGER | read-only | The running state of client. |
| I32 hwEasyOperationClientInfoClientCpuUsage | 1.3.6.1.4.1.2011.5.25.311.5.2.1.33 | Integer32 | read-only | The cpu usage of client. |
| I32 hwEasyOperationClientInfoClientMemoryUsage | 1.3.6.1.4.1.2011.5.25.311.5.2.1.34 | Integer32 | read-only | The memory usage of client. |
| ROW hwEasyOperationClientInfoClientRowStatus | 1.3.6.1.4.1.2011.5.25.311.5.2.1.100 | RowStatus | read-create | The RowStatus of client table. |
| hwEasyOperationClientReplaceTable | 1.3.6.1.4.1.2011.5.25.311.5.3 | not-accessible | The replace client table. | |
| hwEasyOperationClientReplaceEntry | 1.3.6.1.4.1.2011.5.25.311.5.3.1 | not-accessible | The entry of replace client table. | |
| I32 hwEasyOperationClientReplaceClientIndex | 1.3.6.1.4.1.2011.5.25.311.5.3.1.1 | Integer32 | not-accessible | The index of replace client table. |
| MAC hwEasyOperationClientReplaceNewMacAddress | 1.3.6.1.4.1.2011.5.25.311.5.3.1.2 | MacAddress | read-create | The MAC address of new device. |
| STR hwEasyOperationClientReplaceNewEsn | 1.3.6.1.4.1.2011.5.25.311.5.3.1.3 | DisplayString | read-create | The ESN of new device. |
| STR hwEasyOperationClientReplaceDownloadSoftware | 1.3.6.1.4.1.2011.5.25.311.5.3.1.4 | DisplayString | read-create | The software file name needs to be downloaded. |
| STR hwEasyOperationClientReplaceDownloadSoftwareVer | 1.3.6.1.4.1.2011.5.25.311.5.3.1.5 | DisplayString | read-create | The software version needs to be downloaded. |
| STR hwEasyOperationClientReplaceDownloadPatch | 1.3.6.1.4.1.2011.5.25.311.5.3.1.6 | DisplayString | read-create | The patch file name needs to be downloaded. |
| STR hwEasyOperationClientReplaceDownloadWebFile | 1.3.6.1.4.1.2011.5.25.311.5.3.1.7 | DisplayString | read-create | The WEB file name needs to be downloaded. |
| STR hwEasyOperationClientReplaceDownloadLicense | 1.3.6.1.4.1.2011.5.25.311.5.3.1.8 | DisplayString | read-create | The license file name needs to be downloaded. |
| STR hwEasyOperationClientReplaceDownloadCustomfile1 | 1.3.6.1.4.1.2011.5.25.311.5.3.1.9 | DisplayString | read-create | The custom file name needs to be downloaded. |
| STR hwEasyOperationClientReplaceDownloadCustomfile2 | 1.3.6.1.4.1.2011.5.25.311.5.3.1.10 | DisplayString | read-create | The custom file name needs to be downloaded. |
| STR hwEasyOperationClientReplaceDownloadCustomfile3 | 1.3.6.1.4.1.2011.5.25.311.5.3.1.11 | DisplayString | read-create | The custom file name needs to be downloaded. |
| ROW hwEasyOperationClientReplaceRowStatus | 1.3.6.1.4.1.2011.5.25.311.5.3.1.50 | RowStatus | read-create | The RowStatus of table. |
| hwEasyOperationNotification | 1.3.6.1.4.1.2011.5.25.311.6 | |||
| hwEasyOperationTrapVar | 1.3.6.1.4.1.2011.5.25.311.6.1 | |||
| hwEasyOperationTrap | 1.3.6.1.4.1.2011.5.25.311.6.2 | |||
| NTF hwEasyOperationClientAdded | 1.3.6.1.4.1.2011.5.25.311.6.2.1 | The notification of client added. | ||
| NTF hwEasyOperationClientLost | 1.3.6.1.4.1.2011.5.25.311.6.2.2 | The notification of client lost. | ||
| NTF hwEasyOperationClientJoinNotPermit | 1.3.6.1.4.1.2011.5.25.311.6.2.3 | The notification of not permit client to join. | ||
| hwEasyOperationMonitor | 1.3.6.1.4.1.2011.5.25.311.7 | |||
| hwEasyOperationPowerInfo | 1.3.6.1.4.1.2011.5.25.311.7.1 | |||
| hwEasyOperationDevicePowerInfoTable | 1.3.6.1.4.1.2011.5.25.311.7.1.1 | not-accessible | The device power information table. | |
| hwEasyOperationDevicePowerInfoEntry | 1.3.6.1.4.1.2011.5.25.311.7.1.1.1 | not-accessible | The entry of device power infomation table. | |
| I32 hwEasyOperationDevicePowerInfoIndex | 1.3.6.1.4.1.2011.5.25.311.7.1.1.1.1 | Integer32 | not-accessible | The index of device power table. |
| I32 hwEasyOperationDevicePowerInfoCurrentPower | 1.3.6.1.4.1.2011.5.25.311.7.1.1.1.2 | Integer32 | read-only | The current power of device. |
| INT hwEasyOperationDevicePowerInfoGauge | 1.3.6.1.4.1.2011.5.25.311.7.1.1.1.3 | INTEGER | read-only | The gauge of device power. |
| I32 hwEasyOperationDevicePowerInfoRatedPower | 1.3.6.1.4.1.2011.5.25.311.7.1.1.1.4 | Integer32 | read-only | The rated power of device. |
| INT hwEasyOperationDevicePowerInfoPowerManageMode | 1.3.6.1.4.1.2011.5.25.311.7.1.1.1.5 | INTEGER | read-only | The power manage mode of device. |
| hwEasyOperationPortPowerInfoTable | 1.3.6.1.4.1.2011.5.25.311.7.1.2 | not-accessible | The port power information table. | |
| hwEasyOperationPortPowerInfoEntry | 1.3.6.1.4.1.2011.5.25.311.7.1.2.1 | not-accessible | The entry of port power table. | |
| I32 hwEasyOperationPortPowerInfoDeviceIndex | 1.3.6.1.4.1.2011.5.25.311.7.1.2.1.1 | Integer32 | not-accessible | The index of device. |
| I32 hwEasyOperationPortPowerInfoPortIndex | 1.3.6.1.4.1.2011.5.25.311.7.1.2.1.2 | Integer32 | not-accessible | The index of port. |
| OCT hwEasyOperationPortPowerInfoPortName | 1.3.6.1.4.1.2011.5.25.311.7.1.2.1.3 | OCTET STRING | read-only | The port name. |
| I32 hwEasyOperationPortPowerInfoCurrentPower | 1.3.6.1.4.1.2011.5.25.311.7.1.2.1.4 | Integer32 | read-only | The current power of port. |
| INT hwEasyOperationPortPowerInfoGauge | 1.3.6.1.4.1.2011.5.25.311.7.1.2.1.5 | INTEGER | read-write | The gauge of port power. |
| hwEasyOperationNetPowerHistoryInfoTable | 1.3.6.1.4.1.2011.5.25.311.7.1.3 | not-accessible | The net power history information table. | |
| hwEasyOperationNetPowerHistoryInfoEntry | 1.3.6.1.4.1.2011.5.25.311.7.1.3.1 | not-accessible | The entry of net power history table. | |
| I32 hwEasyOperationNetPowerHistoryInfoIndex | 1.3.6.1.4.1.2011.5.25.311.7.1.3.1.1 | Integer32 | not-accessible | The index of the table. |
| I32 hwEasyOperationNetPowerHistoryInfoWholePower | 1.3.6.1.4.1.2011.5.25.311.7.1.3.1.2 | Integer32 | read-only | The total power of the whole network. |
| hwEasyOperationTopologyTable | 1.3.6.1.4.1.2011.5.25.311.7.3 | not-accessible | The topology table. | |
| hwEasyOperationTopologyEntry | 1.3.6.1.4.1.2011.5.25.311.7.3.1 | not-accessible | The entry of topology table. | |
| I32 hwEasyOperationTopologyHopIndex | 1.3.6.1.4.1.2011.5.25.311.7.3.1.1 | Integer32 | not-accessible | The topoloy hop. |
| I32 hwEasyOperationTopologyDeviceIndex | 1.3.6.1.4.1.2011.5.25.311.7.3.1.2 | Integer32 | not-accessible | The index of topology device. |
| MAC hwEasyOperationTopologyLocalMac | 1.3.6.1.4.1.2011.5.25.311.7.3.1.3 | MacAddress | read-only | The mac address of local topology node. |
| MAC hwEasyOperationTopologyFatherMac | 1.3.6.1.4.1.2011.5.25.311.7.3.1.4 | MacAddress | read-only | The mac address of father topology node. |
| OCT hwEasyOperationTopologyLocalPortName | 1.3.6.1.4.1.2011.5.25.311.7.3.1.5 | OCTET STRING | read-only | The port name of local topology node. |
| OCT hwEasyOperationTopologyFatherPortName | 1.3.6.1.4.1.2011.5.25.311.7.3.1.6 | OCTET STRING | read-only | The port name of father topology node. |
| I32 hwEasyOperationTopologyLocalDeviceId | 1.3.6.1.4.1.2011.5.25.311.7.3.1.7 | Integer32 | read-only | The device id of local topology node. |
| I32 hwEasyOperationTopologyFatherDeviceId | 1.3.6.1.4.1.2011.5.25.311.7.3.1.8 | Integer32 | read-only | The device id of father topology node. |
| hwEasyOperationSavedTopologyTable | 1.3.6.1.4.1.2011.5.25.311.7.4 | not-accessible | The saved topology table. | |
| hwEasyOperationSavedTopologyEntry | 1.3.6.1.4.1.2011.5.25.311.7.4.1 | not-accessible | The entry of saved topology table. | |
| I32 hwEasyOperationSavedTopologyHopIndex | 1.3.6.1.4.1.2011.5.25.311.7.4.1.1 | Integer32 | not-accessible | The index of saved topology hop. |
| I32 hwEasyOperationSavedTopologyDeviceIndex | 1.3.6.1.4.1.2011.5.25.311.7.4.1.2 | Integer32 | not-accessible | The index of saved topology device. |
| MAC hwEasyOperationSavedTopologyLocalMac | 1.3.6.1.4.1.2011.5.25.311.7.4.1.3 | MacAddress | read-only | The mac address of saved local topology node. |
| MAC hwEasyOperationSavedTopologyFatherMac | 1.3.6.1.4.1.2011.5.25.311.7.4.1.4 | MacAddress | read-only | The mac address of saved father topology node. |
| OCT hwEasyOperationSavedTopologyLocalPortName | 1.3.6.1.4.1.2011.5.25.311.7.4.1.5 | OCTET STRING | read-only | The port name of saved local topology node. |
| OCT hwEasyOperationSavedTopologyFatherPortName | 1.3.6.1.4.1.2011.5.25.311.7.4.1.6 | OCTET STRING | read-only | The port name of saved father topology node. |
| hwEasyOperationCompliance | 1.3.6.1.4.1.2011.5.25.311.100 | The compliance. | ||
| hwEasyOperationGlobalObjectsGroup | 1.3.6.1.4.1.2011.5.25.311.100.1 | The global objects group. | ||
| hwEasyOperationGroupObjectsGroup | 1.3.6.1.4.1.2011.5.25.311.100.2 | The group objects group. | ||
| hwEasyOperationGroupTableGroup | 1.3.6.1.4.1.2011.5.25.311.100.3 | The group table group. | ||
| hwEasyOperationGroupMatchTableGroup | 1.3.6.1.4.1.2011.5.25.311.100.4 | The match rule table objects group. | ||
| hwEasyOperationClientObjectsGroup | 1.3.6.1.4.1.2011.5.25.311.100.5 | The client objects group. | ||
| hwEasyOperationClientInfoGroup | 1.3.6.1.4.1.2011.5.25.311.100.6 | The client table group. | ||
| hwEasyOperationClientReplaceGroup | 1.3.6.1.4.1.2011.5.25.311.100.7 | The replace client table group. | ||
| hwEasyOperationNotificationGroup | 1.3.6.1.4.1.2011.5.25.311.100.8 | The notification objects group. | ||
| hwEasyOperationDevicePowerInfoGroup | 1.3.6.1.4.1.2011.5.25.311.100.9 | The device power information table group. | ||
| hwEasyOperationPortPowerInfoGroup | 1.3.6.1.4.1.2011.5.25.311.100.10 | The port power information table group. | ||
| hwEasyOperationTopologyGroup | 1.3.6.1.4.1.2011.5.25.311.100.11 | The topology table group. | ||
| hwEasyOperationSavedTopologyGroup | 1.3.6.1.4.1.2011.5.25.311.100.12 | The saved topology table group. | ||
| hwEasyOperationNetPowerHistoryInfoGroup | 1.3.6.1.4.1.2011.5.25.311.100.13 | The power history of whole network table group. |
RFC description
Provides easy operation management functions for Huawei network equipment administration.
Start monitoring Huawei enterprise switch or router (simplified quick-deployment profiles) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.