All MIBs › HUAWEI-DHCP-PROXY-MIB
Organization: Huawei Technologies Co., Ltd.
Last Updated: 2012-07-06
Category: IP and Core Protocols, Vendor: Huawei
Description: Huawei DHCP proxy MIB for configuring and monitoring DHCP proxy services that relay client requests to servers across different network segments.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-DHCP-PROXY-MIB?
HUAWEI-DHCP-PROXY-MIB is a Huawei-proprietary MIB covering Huawei's broader DHCP feature set, including DHCP Layer-3 relay, DHCP Proxy, DHCP Option 82 insertion, DHCP user logging, and DHCP simulation, per its module description. It exposes configuration objects for these DHCP relay/proxy behaviors and status/logging objects tracking DHCP client activity as requests are relayed across network segments to DHCP servers. Its monitoring value centers on service/software health of the DHCP relay function: tracking DHCP request/response activity and user log entries lets an operator detect DHCP server unreachability, relay misconfiguration, or unusual client request volumes indicative of a DHCP-based attack or fault. It builds on the standard DHCP relay concepts from RFC 3046 (Option 82) while adding Huawei-specific proxy and simulation extensions. It is deployed on Huawei switches and routers acting as DHCP relay/proxy agents at the network edge or aggregation layer. Engineers can download the HUAWEI-DHCP-PROXY-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-DHCP-PROXY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei switch or router (DHCP relay/proxy device)
Monitoring Examples
An administrator would poll DHCP relay/proxy statistics and the DHCP user log table (patterned as hwDhcpUserLogTable, though not confirmed from source) to track how many DHCP requests are being relayed per interface, with a sudden drop to zero successful relays indicating the DHCP server path is broken or Option 82 insertion is misconfigured. No sample_objects were provided for this module, so specific object names are inferred rather than confirmed from source.
What Can Be Monitored
- DHCP relay/proxy request activity
- DHCP Option 82 insertion status
- DHCP user log entries
- DHCP relay configuration
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-ADSL-MIB
| hwAdslLinePvcVci | OBJECT-TYPE |
| hwAdsllinePvcVpi | OBJECT-TYPE |
From HUAWEI-MIB
| huaweiMgmt | OBJECT-IDENTITY |
From HUAWEI-VLAN-MIB
| hwVlanID | OBJECT-TYPE |
| hwVlanIndex | OBJECT-TYPE |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwDhcpProxy | 1.3.6.1.4.1.2011.5.18 | The MIB is used for defining Huawei's DHCP attribute. It includes DHCP L3 Relay, DHCP Proxy, DHCP Option82, DHCP User Log, and DHCP Simulation. | ||
| hwDhcpMibObject | 1.3.6.1.4.1.2011.5.18.1 | |||
| hwDhcpGroupTable | 1.3.6.1.4.1.2011.5.18.1.1 | not-accessible | Describes the DHCP server group, including IP addresses of the primary DHCP server and secondary server in each group. It supports the create, modify, delete, and query operations. The index of this table is hwDhcpGroupID. | |
| hwDhcpGroupEntry | 1.3.6.1.4.1.2011.5.18.1.1.1 | not-accessible | Describes the DHCP server group, including IP addresses of the primary DHCP server and secondary server in each group. It supports the create, modify, delete, and query operations. The index of this entry is hwDhcpGroupID. | |
| I32 hwDhcpGroupID | 1.3.6.1.4.1.2011.5.18.1.1.1.1 | Integer32 | read-only | Indicates the index of the DHCP server group. |
| IP hwIpDhcpServerAddress1 | 1.3.6.1.4.1.2011.5.18.1.1.1.2 | IpAddress | read-write | Indicates the IP address of the first server in the DHCP server group. It must be a valid unicast IP address and must be different from existing IP addresses in other server groups. |
| IP hwIpDhcpServerAddress2 | 1.3.6.1.4.1.2011.5.18.1.1.1.3 | IpAddress | read-write | Indicates the IP address of the second server in the DHCP server group. It must be a valid unicast IP address, must be different from existing IP addresses in other server groups, and must be different from hwIpDhcpServerAddress1. When hwIpDhcpServerAddress1 is not configured, hwIpDhcpServerAddress2 cannot be configured. |
| ROW hwDhcpRowStatus | 1.3.6.1.4.1.2011.5.18.1.1.1.4 | RowStatus | read-create | Row status, used for configuring the DHCP server group. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a DHCP server group 3. destroy(6) -delete a DHCP server group To create a DHCP server group, specify the index and leaf hwIpDhcpServerAddress1 (other leaves are optional), set hwDhcpRowStatus to createAndGo, and perform the set operation. To modify a DHCP server group, specify the index and leaf hwIpDhcpServerAddress1 (other leaves are optional) and perform the set operation. To delete a DHCP server group, specify index hwDhcpGroupID, set hwDhcpRowStatus to destroy(6), and perform the set operation. In the query operation, the value of this leaf is always active(1). |
| IP hwIpDhcpCurrentServerAddress | 1.3.6.1.4.1.2011.5.18.1.1.1.5 | IpAddress | read-only | Indicates the IP address of the current server in the DHCP server group. It is a read-only leaf and is meaningful only when the DHCP server works in the backup mode. If the server does not work in the backup mode, it is 0.0.0.0 by default. |
| IP hwIpDhcpServerAddress3 | 1.3.6.1.4.1.2011.5.18.1.1.1.6 | IpAddress | read-write | Indicates the IP address of the third server in the DHCP server group. It must be a valid unicast IP address, must be different from existing IP addresses in other server groups, and must be different from hwIpDhcpServerAddress1 or hwIpDhcpServerAddress2. When hwIpDhcpServerAddress1 and hwIpDhcpServerAddress2 are not configured, hwIpDhcpServerAddress3 cannot be configured. |
| IP hwIpDhcpServerAddress4 | 1.3.6.1.4.1.2011.5.18.1.1.1.7 | IpAddress | read-write | Indicates the IP address of the fourth server in the DHCP server group. It must be a valid unicast IP address, must be different from existing IP addresses in other server groups, and must be different from hwIpDhcpServerAddress1, hwIpDhcpServerAddress2, or hwIpDhcpServerAddress3. When hwIpDhcpServerAddress1, hwIpDhcpServerAddress2, and hwIpDhcpServerAddress3 are not configured, hwIpDhcpServerAddress4 cannot be configured. |
| hwDhcpSecurityTable | 1.3.6.1.4.1.2011.5.18.1.2 | not-accessible | A table containing the information of dhcp security. If security feature is supported by DHCP, add/delete table item of the user address, whose IP is the index. dhcp relay records in the table the IP address and MAC address of the legal user who acquire the IP address through relay. Through this table, the information of legal users can be queried. Moreover, in order to meet the needs of users to configure fixed IP address. This table enables the information configuration of the legal user with a fixed IP address. Specify the IP address, MAC address and the property of the static/dynamic address to implement the create operation. The index of this table is hwDhcpClientIpAddress. | |
| hwDhcpSecurityEntry | 1.3.6.1.4.1.2011.5.18.1.2.1 | not-accessible | A table containing the information of dhcp security. If security feature is supported by DHCP, add/delete table item of the user address, whose IP is the index. dhcp relay records in the table the IP address and MAC address of the legal user who acquire the IP address through relay. Through this table, the information of legal users can be queried. Moreover, in order to meet the needs of users to configure fixed IP address. This table enables the information configuration of the legal user with a fixed IP address. Specify the IP address, MAC address and the property of the static/dynamic address to implement the create operation. The index of this entry is hwDhcpClientIpAddress. | |
| IP hwDhcpClientIpAddress | 1.3.6.1.4.1.2011.5.18.1.2.1.1 | IpAddress | read-only | The client IP address. |
| MAC hwDhcpClientMacAddress | 1.3.6.1.4.1.2011.5.18.1.2.1.2 | MacAddress | read-write | The client MAC address. |
| INT hwDhcpClientProperty | 1.3.6.1.4.1.2011.5.18.1.2.1.3 | INTEGER | read-write | Property of client. Options: 1. static(1) -indicates client property is static 2. dynamic(2) -indicates client property is dynamic |
| ROW hwDhcpClientRowStatus | 1.3.6.1.4.1.2011.5.18.1.2.1.4 | RowStatus | read-create | Status of this table's entry. |
| hwDhcpToL3IfTable | 1.3.6.1.4.1.2011.5.18.1.3 | not-accessible | Describes the binding between the VLAN interface and the DHCP server group. It supports the create, query, and modify operations. The index of this table is hwDhcpToL3VlanIfIndex. | |
| hwDhcpToL3IfEntry | 1.3.6.1.4.1.2011.5.18.1.3.1 | not-accessible | Describes the binding between the VLAN interface and the DHCP server group. It supports the create, query, and modify operations. The index of this entry is hwDhcpToL3VlanIfIndex. | |
| I32 hwDhcpToL3VlanIfIndex | 1.3.6.1.4.1.2011.5.18.1.3.1.1 | Integer32 | read-only | Indicates binding to the VLAN ID of the DHCP server group. It uses hwVlanInterfaceID of hwVlanInterfaceTable. |
| I32 hwDhcpToL3GroupId | 1.3.6.1.4.1.2011.5.18.1.3.1.2 | Integer32 | read-write | Indicates the corresponding DHCP server group of the VLAN interface. Range: 0-20 In the configuration, if the value of hwDhcpToL3GroupId is in the range of 0-19, ensure that the server group corresponding to this ID exists. Value 20 of hwDhcpToL3GroupId indicates unbinding. In the query, if this interface is not bound to any server group, value 20 of hwDhcpToL3GroupId is returned. |
| INT hwDhcpToL3AddressCheck | 1.3.6.1.4.1.2011.5.18.1.3.1.3 | INTEGER | read-write | If dhcp security check enabled for this vlan virtual interface. By default, it is disabled. Options: 1. enabled(1) -indicates dhcp security check is enabled 2. disabled(2) -indicates dhcp security check is disabled |
| ROW hwDhcpToL3RowStatus | 1.3.6.1.4.1.2011.5.18.1.3.1.4 | RowStatus | read-create | Indicates the row status, used to configure the corresponding DHCP server group of the VLAN interface. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a binding between the VLAN interface and the DHCP server group 3. destroy(6) -delete a binding between the VLAN interface and the DHCP server group Creates the binding between the VLAN interface and the DHCP server group. Specify the index and hwDhcpToL3GroupId, set hwDhcpToL3RowStatus to createAndGo(4), and perform the set operation. In the query operation, the value of this leaf is always active(1). Modifies the binding between the VLAN interface and the DHCP server group. Specify the index and hwDhcpToL3GroupId, set hwDhcpToL3RowStatus to active(1), and perform the set operation. Value 20 of hwDhcpToL3GroupId indicates unbinding. Deletes the binding between the VLAN interface and the DHCP server group, Specify the index and hwDhcpToL3GroupId, set hwDhcpToL3RowStatus to destroy(6), and perform the set operation. |
| hwDhcpPortPvcTable | 1.3.6.1.4.1.2011.5.18.1.4 | not-accessible | Indicates DHCP pvc supported port management feature. The indexes of this table are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci. | |
| hwDhcpPortPvcEntry | 1.3.6.1.4.1.2011.5.18.1.4.1 | not-accessible | Indicates DHCP pvc supported port management feature. The indexes of this entry are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci. | |
| T/F hwDhcpPortPvcOption82AdminStatus | 1.3.6.1.4.1.2011.5.18.1.4.1.1 | TruthValue | read-write | DHCP Option82 on pvc of port administer state: true(enable)/false(disable),the default is false. Options: 1. true(1) -indicates DHCP Option82 is on 2. false(2) -indicates DHCP Option82 is off |
| T/F hwDhcpPortPvcIPBindAdminStatus | 1.3.6.1.4.1.2011.5.18.1.4.1.2 | TruthValue | read-write | IP Binding on pvc of port administer state: true(enable)/false(disable),the default is false. Options: 1. true(1) -indicates IP Binding is enabled 2. false(2) -indicates IP Binding is disabled |
| ROW hwDhcpPortPvcRowStatus | 1.3.6.1.4.1.2011.5.18.1.4.1.3 | RowStatus | read-create | Row status. Add or delete a table item. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating operation 3. destroy(6) -indicates deleting operation |
| hwDhcpPortTable | 1.3.6.1.4.1.2011.5.18.1.5 | not-accessible | Indicates DHCP port management feature. The index of this table is ifIndex. | |
| hwDhcpPortEntry | 1.3.6.1.4.1.2011.5.18.1.5.1 | not-accessible | Indicates DHCP port management feature. The index of this entry is ifIndex. | |
| T/F hwDhcpPortOption82AdminStatus | 1.3.6.1.4.1.2011.5.18.1.5.1.1 | TruthValue | read-write | DHCP Option82 on port administer state: true(enable)/false(disable),the default is false. Options: 1. true(1) -indicates DHCP Option82 is on 2. false(2) -indicates DHCP Option82 is off |
| T/F hwDhcpPortUpLinkStatus | 1.3.6.1.4.1.2011.5.18.1.5.1.2 | TruthValue | read-write | Up-link administer state, only a port on main board can be an up-link; true(yes)/false(no),the default is true. Options: 1. true(1) -indicates only a port on main board can be an up-link 2. false(2) -indicates not only a port on main board can be an up-link |
| ROW hwDhcpPortRowStatus | 1.3.6.1.4.1.2011.5.18.1.5.1.3 | RowStatus | read-create | Row status. Add or delete a table item. |
| hwDhcpDomainTable | 1.3.6.1.4.1.2011.5.18.1.6 | not-accessible | Describes the DHCP domain information in the DHCP option 60 mode. It supports the query, create, modify, and delete operations. The index of this table is hwDhcpDomainName. | |
| hwDhcpDomainEntry | 1.3.6.1.4.1.2011.5.18.1.6.1 | not-accessible | Describes the DHCP domain information in the DHCP option 60 mode. It supports the query, create, modify, and delete operations. The index of this entry is hwDhcpDomainName. | |
| OCT hwDhcpDomainName | 1.3.6.1.4.1.2011.5.18.1.6.1.1 | OCTET STRING | read-only | Indicates the DHCP domain name, which is used with the option 60 field in the user packets to differentiate various types of users in DHCP option 60 mode. Range: 1-32 characters The format is character string length+character ASCII length. For example, the length of 'hwdomain' is 8 and its corresponding octet string is 8.104.119.100.111.109.97.105.110. |
| I32 hwDhcpDomainGroupId | 1.3.6.1.4.1.2011.5.18.1.6.1.2 | Integer32 | read-write | Indicates the corresponding DHCP server group of the domain. It uses hwDhcpGroupID in hwDhcpGroupTable. Range: 0-20 0-19 indicates the ID of the server group; 20 indicates not binding with any server group. |
| ROW hwDhcpDomainRowStatus | 1.3.6.1.4.1.2011.5.18.1.6.1.3 | RowStatus | read-create | Row status, used for configuring the DHCP domain name. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a DHCP domain name 3. destroy(6) -delete a DHCP domain name Create a DHCP domain name, specify hwDhcpDomainName as the index, set hwDhcpDomainRowStatus to createAndGo(4), and perform the set operation. hwDhcpDomainGroupId is used to bind to a domain name or a DHCP server group. It is an optional leaf. In the query operation, the value of this leaf is always active(1). When modifying or configuring hwDhcpDomainGroupId, specify hwDhcpDomainName and hwDhcpDomainGroupId and perform the set operation. When deleting a DHCP domain name, specify hwDhcpDomainName, set hwDhcpDomainRowStatus to destroy(6), and perform the set operation. |
| INT hwDhcpDomainGatewayLearn | 1.3.6.1.4.1.2011.5.18.1.6.1.4 | INTEGER | read-write | Indicates the function of automatically learning the relay IP addresses of the DHCP packets that belong to this domain. Data type:INTEGER Options: 1. enable(1) -enable the IP address learning function for the DHCP gateway 2. disable(2) -disable the IP address learning function for the DHCP gateway Access right: read-write Default: disable(2) |
| hwDhcpMacRangeTable | 1.3.6.1.4.1.2011.5.18.1.7 | not-accessible | Describes the DHCP MAC-range information in the DHCP MAC-range mode. It supports the query, create, modify, and delete operations. The index of this table is hwDhcpMacRangeName. | |
| hwDhcpMacRangeEntry | 1.3.6.1.4.1.2011.5.18.1.7.1 | not-accessible | Describes the DHCP MAC-range information in the DHCP MAC-range mode. It supports the query, create, modify, and delete operations. The index of this entry is hwDhcpMacRangeName. | |
| OCT hwDhcpMacRangeName | 1.3.6.1.4.1.2011.5.18.1.7.1.1 | OCTET STRING | read-write | DHCP MAC-range, used with the user MAC addresses to differentiate various types of users in DHCP MAC-range mode. Range: 1-32 characters For example, the index of 'mran' is 4.109.114.97.110. |
| MAC hwDhcpMacRangeStart | 1.3.6.1.4.1.2011.5.18.1.7.1.2 | MacAddress | read-write | Indicates the start address of the MAC-range, which must be a valid unicast MAC address. The format is a 6-byte hexadecimal character string, for example, 0x00 0xe0 0xfc 0x11 0x00 0x00. |
| MAC hwDhcpMacRangeEnd | 1.3.6.1.4.1.2011.5.18.1.7.1.3 | MacAddress | read-write | Indicates the end address of the MAC-range, which must be a valid unicast MAC address. hwDhcpMacRangeEnd must be equal to or larger than hwDhcpMacRangeStart. The format is a 6-byte hexadecimal character string, for example, 0x00 0xe0 0xfc 0x11 0x00 0x00. |
| I32 hwDhcpMacRangeGroupId | 1.3.6.1.4.1.2011.5.18.1.7.1.4 | Integer32 | read-write | Indicates the DHCP server group relevant to the MAC-range. |
| ROW hwDhcpMacRangeRowStatus | 1.3.6.1.4.1.2011.5.18.1.7.1.5 | RowStatus | read-create | Row status, used to create a MAC-range, modify a MAC-range, and bind a MAC-range to a DHCP server group. Options: 1. active(1) -in the query operation, the value of this leaf is always active(1). 2. createAndGo(4) -create a MAC-range to a DHCP server group 3. destroy(6) -delete a MAC-range to a DHCP server group To create a MAC-range, hwDhcpMacRangeName must be specified. At the same time, hwDhcpMacRangeStart and hwDhcpMacRangeEnd can be selected and configured. In addition, hwDhcpMacRangeGroupId can also be configured. Finally, set hwDhcpMacRangeRowStatus to createAndGo(4) and perform the set operation. The restrictions on the modify and create operations are the same, but the row status need not be bound. In the query operation, the value of this leaf is always active(1). In the delete operation, hwDhcpMacRangeName needs to be specified. Set hwDhcpDomainRowStatus to destroy(6) and perform the set operation. |
| hwDhcpDomainGatewayTable | 1.3.6.1.4.1.2011.5.18.1.8 | not-accessible | Describes the binding between the DHCP domain and gateway corresponding to the VLAN interface in the DHCP option 60 mode. It supports the modify and query operations. The indexes of this table are hwDhcpDomainGatewayVlanIfIndex and hwDhcpDomainGatewayDmName. | |
| hwDhcpDomainGatewayEntry | 1.3.6.1.4.1.2011.5.18.1.8.1 | not-accessible | Describes the binding between the DHCP domain and gateway corresponding to the VLAN interface in the DHCP option 60 mode. It supports the modify and query operations. The indexes of this entry are hwDhcpDomainGatewayVlanIfIndex and hwDhcpDomainGatewayDmName. | |
| I32 hwDhcpDomainGatewayVlanIfIndex | 1.3.6.1.4.1.2011.5.18.1.8.1.1 | Integer32 | read-only | Indicates the VLAN ID to be bound to the gateway. Range: 1-4093 |
| OCT hwDhcpDomainGatewayDmName | 1.3.6.1.4.1.2011.5.18.1.8.1.2 | OCTET STRING | read-only | DHCP domain name. Range: 1-32 characters The format is character string length+character ASCII length. For example, the length of 'hwdomain' is 8 and its corresponding octet string is 8.104.119.100.111.109.97.105.110. |
| IP hwDhcpDomainGateway | 1.3.6.1.4.1.2011.5.18.1.8.1.3 | IpAddress | read-write | Indicates the gateway IP address bound to the VLAN interface in the DHCP domain. |
| ROW hwDhcpDomainGatewayRowStatus | 1.3.6.1.4.1.2011.5.18.1.8.1.4 | RowStatus | read-create | Row status, used for binding a VLAN interface to a DHCP domain or gateway. Options: 1. active(1) -indicates query operation When modifying the binding between the DHCP domain and the gateway, configure hwDhcpDomainGateway to the gateway IP address to be bound to. Make sure that the IP address exists under the interface, and it can be the primary or secondary IP address of the interface. If the value is 0.0.0.0, it indicates that no gateway is bound to. In the query operation, the value of this leaf is always active(1). |
| IP hwDhcpDomainGateway2 | 1.3.6.1.4.1.2011.5.18.1.8.1.5 | IpAddress | read-create | Indicates the second gateway IP address bound to the VLAN interface in the DHCP domain. |
| IP hwDhcpDomainGateway3 | 1.3.6.1.4.1.2011.5.18.1.8.1.6 | IpAddress | read-create | Indicates the third gateway IP address bound to the VLAN interface in the DHCP domain. |
| hwDhcpMacGatewayTable | 1.3.6.1.4.1.2011.5.18.1.9 | not-accessible | Describes the binding between the VLAN interface and the gateway in the DHCP MAC-range mode. It supports the query and modify operations. The indexes of this table are hwDhcpMacGatewayVlanIfIndex and hwDhcpMacGatewayMacName. | |
| hwDhcpMacGatewayEntry | 1.3.6.1.4.1.2011.5.18.1.9.1 | not-accessible | Describes the binding between the VLAN interface and the gateway in the DHCP MAC-range mode. It supports the query and modify operations. The indexes of this entry are hwDhcpMacGatewayVlanIfIndex and hwDhcpMacGatewayMacName. | |
| I32 hwDhcpMacGatewayVlanIfIndex | 1.3.6.1.4.1.2011.5.18.1.9.1.1 | Integer32 | read-only | Indicates the VLAN ID to be bound to. Range: 1-4093 |
| OCT hwDhcpMacGatewayMacName | 1.3.6.1.4.1.2011.5.18.1.9.1.2 | OCTET STRING | read-only | Indicates the name of the DHCP MAC-range. It uses hwDhcpMacRangeName in hwDhcpMacRangeTable. Range: 1-32 characters |
| IP hwDhcpMacGateway | 1.3.6.1.4.1.2011.5.18.1.9.1.3 | IpAddress | read-write | Indicates the gateway IP address bound to the VLAN interface in the DHCP MAC-range. It uses hwVlanIpAddress (primary IP address) in hwVlanInterfaceTable. Make sure that the IP address exists under the interface, and it can be the primary or secondary IP address of the interface. If the value is 0.0.0.0, it indicates that no gateway is bound to. |
| ROW hwDhcpMacGatewayRowStatus | 1.3.6.1.4.1.2011.5.18.1.9.1.4 | RowStatus | read-create | Row status, used to bind a MAC-range to the gateway IP address. In the modify operation, specify hwDhcpMacGateway and perform the set operation. In the query operation, the value of this leaf is always active(1). Options: 1. active(1) -in the query operation, the value of this leaf is always active(1). |
| hwDhcpOption82StatisticsTable | 1.3.6.1.4.1.2011.5.18.1.10 | not-accessible | Describes the statistics of various DHCP packets received on the DHCP L2 relay. It supports the query and set operations. The index of this table is ifIndex. | |
| hwDhcpOption82StatisticsEntry | 1.3.6.1.4.1.2011.5.18.1.10.1 | not-accessible | Describes the statistics of various DHCP packets received on the DHCP L2 relay. It supports the query and set operations. The index of this entry is ifIndex. | |
| C32 hwDhcpOption82ReceiveUntrust | 1.3.6.1.4.1.2011.5.18.1.10.1.1 | Counter32 | read-only | Indicates the total number of DHCP packets containing the untrust option 82 information. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveOverLength | 1.3.6.1.4.1.2011.5.18.1.10.1.2 | Counter32 | read-only | Indicates the total number of DHCP packets that exceed the maximum packet length after option 82 is added. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveDiscover | 1.3.6.1.4.1.2011.5.18.1.10.1.3 | Counter32 | read-only | Indicates the total number of received DHCP discover packets. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveOffer | 1.3.6.1.4.1.2011.5.18.1.10.1.4 | Counter32 | read-only | Indicates the total number of received DHCP offer packets. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveRequest | 1.3.6.1.4.1.2011.5.18.1.10.1.5 | Counter32 | read-only | Indicates the total number of received DHCP request packets. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveDecline | 1.3.6.1.4.1.2011.5.18.1.10.1.6 | Counter32 | read-only | Indicates the total number of received DHCP decline packets. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveAck | 1.3.6.1.4.1.2011.5.18.1.10.1.7 | Counter32 | read-only | Indicates the total number of received DHCP ACK packets. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveNak | 1.3.6.1.4.1.2011.5.18.1.10.1.8 | Counter32 | read-only | Indicates the total number of received DHCP NAK packets. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveRelease | 1.3.6.1.4.1.2011.5.18.1.10.1.9 | Counter32 | read-only | Indicates the total number of received DHCP release packets. Range: 0-4294967295 |
| C32 hwDhcpOption82ReceiveInform | 1.3.6.1.4.1.2011.5.18.1.10.1.10 | Counter32 | read-only | Indicates the total number of received DHCP inform packets. Range: 0-4294967295 |
| INT hwDhcpOption82StatisticsClear | 1.3.6.1.4.1.2011.5.18.1.10.1.11 | INTEGER | read-write | Resets the statistics of DHCP packets. Set it to clear(1) and perform the set operation. Options: 1. clear(1) -resets the statistics of DHCP packets |
| C32 hwDhcpOption82ReceiveOverMaxOption82Size | 1.3.6.1.4.1.2011.5.18.1.10.1.12 | Counter32 | read-only | Indicates the total number of received DHCP packets that exceed the maximum option 82 length after the option 82 information is added. |
| INT hwDhcpOption82Status | 1.3.6.1.4.1.2011.5.18.1.16 | INTEGER | read-write | Indicates the status of the global DHCP Option82 switch. Options: 1. enable(1) -indicates adding a vendor tag to or deleting it from the DHCP packet on the device. 2. disable(2) -indicates not adding a vendor tag to or deleting it from the DHCP packet on the device. 3. forward(3) -indicates not processing the vendor tag of the DHCP packet. In this case, the packet is transparently transmitted. 4. rebuild(4) -indicates rebuild the vendor tag from the ONU device,to meet the TR-156 needs. Default: disable(2) |
| INT hwDhcpRelayMode | 1.3.6.1.4.1.2011.5.18.1.17 | INTEGER | read-write | Describes the current DHCP forwarding mode of the system. Options: 1. layer2(3) -indicates L2 mode 2. layer3(1) -indicates L3 mode Default: layer2(3) |
| INT hwDhcpServerSelectMode | 1.3.6.1.4.1.2011.5.18.1.18 | INTEGER | read-write | Describes the global DHCP server selection mode in the DHCP L3 relay mode. Currently, there are three modes: standard mode, option 60 mode, and MAC-range mode. Options: 1. standard(1) -indicates the standard mode 2. option60(2) -indicates the domain mode 3. macRange(3) -indicates the MAC-range mode Default: standard(1) |
| I32 hwDhcpMaxLenAppendOp82 | 1.3.6.1.4.1.2011.5.18.1.19 | Integer32 | read-write | Indicates the allowable maximum length of a DHCP packet. Range: 500-1500 Unit: byte Default: 1500 bytes |
| T/F hwDhcpCIDState | 1.3.6.1.4.1.2011.5.18.1.20 | TruthValue | read-write | Circuit-id writing state,true(writing to DHCP packet)/false(not writing to DHCP packet). Default: true(1) |
| T/F hwDhcpRIDState | 1.3.6.1.4.1.2011.5.18.1.21 | TruthValue | read-write | Remote-id writing state,true(writing to DHCP packet)/false(not writing to DHCP packet). Default: true(1) |
| INT hwDhcpSuboption90Status | 1.3.6.1.4.1.2011.5.18.1.22 | INTEGER | read-write | Indicates the status of Suboption90 of DHCP Option82. Options: 1. enable(1) -enable Suboption90 of DHCP Option82 2. disable(2) -disable Suboption90 of DHCP Option82 Default: disable(2) |
| INT hwDhcpRelayServerMode | 1.3.6.1.4.1.2011.5.18.1.23 | INTEGER | read-write | Configures the working mode of the DHCP server. Options: 1. shareload(1) -indicates the load balancing mode. In this mode, the system forwards all DHCP packets from the user to all servers in the DHCP server group. 2. backup(2) -indicates the backup mode. In this mode, the system forwards packets from the user to only the primary server in the DHCP server group. When the primary server is disconnected, the packets are forwarded to the secondary server. Default: shareload(1) |
| I32 hwDhcpServerReplyMaxTime | 1.3.6.1.4.1.2011.5.18.1.24 | Integer32 | read-write | Configures or queries the response timeout time of packets of the DHCP server when the server works in the backup mode. Range: 1-60 Unit: second Default: 1 |
| I32 hwDhcpServerReplyOvertimeMaxTimes | 1.3.6.1.4.1.2011.5.18.1.25 | Integer32 | read-write | Configures or queries the response timeout times of packets of the DHCP server when the server works in the backup mode. Range: 1-255 Default: 1 |
| hwDhcpSuboptionTable | 1.3.6.1.4.1.2011.5.18.1.26 | not-accessible | Indicates DHCP suboption feature. The index of this table is hwDhcpSuboptionIndex. | |
| hwDhcpSuboptionEntry | 1.3.6.1.4.1.2011.5.18.1.26.1 | not-accessible | Indicates DHCP suboption feature. The index of this entry is hwDhcpSuboptionIndex. | |
| I32 hwDhcpSuboptionIndex | 1.3.6.1.4.1.2011.5.18.1.26.1.1 | Integer32 | read-only | The index of DHCP suboption: index 1 stand for suboption 0x81; index 2 stand for suboption 0x82; index 3 stand for suboption 0x83; index 4 stand for suboption 0x84; index 5 stand for suboption 0x85; index 6 stand for suboption 0x86; index 7 stand for suboption 0x87; index 8 stand for suboption 0x88; index 9 stand for suboption 0x89; index 10 stand for suboption 0x8a; index 11 stand for suboption 0x8b; index 12 stand for suboption 0x8c; index 13 stand for suboption 0x8d; index 14 stand for suboption 0x8e; index 15 stand for suboption 0x90; |
| T/F hwDhcpSuboptionStatus | 1.3.6.1.4.1.2011.5.18.1.26.1.2 | TruthValue | read-write | The configuration of DHCP suboption: true(enable)/false(disable),the default is false.. hwDhcpSuboptionStatus OBJECT-TYPE |
| INT hwDhcpSuboption7Status | 1.3.6.1.4.1.2011.5.18.1.27 | INTEGER | read-write | Indicates the status of Suboption7 of DHCP Option82. Options: 1. enable(1) -indicates the Suboption7 of DHCP Option82 is enabled 2. disable(2) -indicates the Suboption7 of DHCP Option82 is disabled Default: disable(2) |
| INT hwDhcpProxyStatus | 1.3.6.1.4.1.2011.5.18.1.28 | INTEGER | read-write | Describes the current status of the DHCP proxy switch. Options: 1. enable(1) -enable DHCP proxy 2. disable(2) -disable DHCP proxy Default: disable(2) Perform the query and modify operations through get and set operations. |
| I32 hwDhcpLeaseTime | 1.3.6.1.4.1.2011.5.18.1.29 | Integer32 | read-write | Describes the DHCP proxy lease time of the system. Range: 0, 300-10080 Unit: minute Default: 0 indicates that the lease time is not set. Perform the query and modify operations through get and set operations. |
| hwDhcpServerSelectModeByVlanTable | 1.3.6.1.4.1.2011.5.18.1.30 | not-accessible | Describes the DHCP server selection mode of the VLAN and supports the query and modify operations. The index of this table is hwVlanIndex. | |
| hwDhcpServerSelectModeByVlanEntry | 1.3.6.1.4.1.2011.5.18.1.30.1 | not-accessible | Describes the DHCP server selection mode of the VLAN and supports the query and modify operations. The index of this entry is hwVlanIndex. | |
| INT hwDhcpServerSelectModeByVlan | 1.3.6.1.4.1.2011.5.18.1.30.1.1 | INTEGER | read-write | Indicates the DHCP server selection mode of the VLAN interface. Options: 1. standard(1) -indicates the standard mode 2. option60(2) -indicates the domain mode 3. macRange(3) -indicates the MAC-range mode Default: standard(1) |
| ROW hwDhcpServerSelectModeByVlanRowStatus | 1.3.6.1.4.1.2011.5.18.1.30.1.2 | RowStatus | read-create | Row status, used to set the DHCP server selection mode of the VLAN interface. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a DHCP server selection mode of the VLAN interface 3. destroy(6) -delete a DHCP server selection mode of the VLAN interface To create the DHCP server selection mode of the VLAN interface, bind to hwDhcpServerSelectModeByVlan, set hwDhcpServerSelectModeByVlanRowStatus to createAndGo, and then perform the set operation. In the query operation, the value of this leaf is always active(1). To modify the DHCP server selection mode of the VLAN interface, specify hwDhcpServerSelectModeByVlan and perform the set operation. To delete the DHCP server selection mode of the VLAN interface and use the global selection mode, specify hwDhcpServerSelectModeByVlan, set hwDhcpServerSelectModeByVlanRowStatus to destroy(6), and perform the set operation. |
| hwDhcpUserTable | 1.3.6.1.4.1.2011.5.18.1.31 | not-accessible | Provides the function of DHCP proxy user management, including querying the user information and forcing a user to go offline. The index of this table is hwDhcpUserIndex. | |
| hwDhcpUserEntry | 1.3.6.1.4.1.2011.5.18.1.31.1 | not-accessible | Provides the function of DHCP proxy user management, including querying the user information and forcing a user to go offline. The index of this entry is hwDhcpUserIndex. | |
| I32 hwDhcpUserIndex | 1.3.6.1.4.1.2011.5.18.1.31.1.1 | Integer32 | read-only | Indicates the DHCP proxy user index. Range: 0-4095 |
| I32 hwDhcpUserPortIndex | 1.3.6.1.4.1.2011.5.18.1.31.1.2 | Integer32 | read-only | Indicates the index of the port where the DHCP user resides. Its algorithm and value are the same as ifIndex. |
| I32 hwDhcpUserFlowID | 1.3.6.1.4.1.2011.5.18.1.31.1.3 | Integer32 | read-only | Indicates the ID of the service where the DHCP user resides. Here it indicates the service port ID created by the current device. The service port index on the NMS is 1 larger than the service port index on the host. |
| I32 hwDhcpUserVlanID | 1.3.6.1.4.1.2011.5.18.1.31.1.4 | Integer32 | read-only | Indicates the DHCP user VLAN index. Range: 1-4093 |
| IP hwDhcpUserIpAddress | 1.3.6.1.4.1.2011.5.18.1.31.1.5 | IpAddress | read-only | Indicates the IP address of the DHCP user dynamically obtained from the DHCP server, in dotted decimal notation, for example, 10.11.104.10. |
| MAC hwDhcpUserMACAddress | 1.3.6.1.4.1.2011.5.18.1.31.1.6 | MacAddress | read-only | Indicates the MAC address of the DHCP user. The format is a 6-byte hexadecimal character string, for example, 0x00 0xe0 0xfc 0x11 0x00 0x00. |
| IP hwDhcpUserServerIpAddress | 1.3.6.1.4.1.2011.5.18.1.31.1.7 | IpAddress | read-only | Indicates the IP address of the DHCP server to which the DHCP user belongs, in dotted decimal notation, for example, 10.11.104.10. |
| I32 hwDhcpUserLeaseTime | 1.3.6.1.4.1.2011.5.18.1.31.1.8 | Integer32 | read-only | Indicates the lease time of the DHCP user. Unit: second |
| ROW hwDhcpUserRowStatus | 1.3.6.1.4.1.2011.5.18.1.31.1.9 | RowStatus | read-create | Indicates the row status, used to query and delete the DHCP proxy user. The set operation supports only destroy(6). During query, active(1) is fixedly returned for this leaf. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. destroy(6) -delete a DHCP proxy user |
| hwDhcpDomainServerInVlanTable | 1.3.6.1.4.1.2011.5.18.1.32 | not-accessible | Describes the binding between the VLAN interface and the DHCP server group in the domain mode. It supports the query, create, modify, and delete operations. The indexes of this table are hwVlanIndex and hwDhcpDomainName. hwVlanIndex is imported from hwVlanMIBTable in HUAWEI-VLAN-MIB. hwDhcpDomainName is imported from hwDhcpDomainTable. | |
| hwDhcpDomainServerInVlanEntry | 1.3.6.1.4.1.2011.5.18.1.32.1 | not-accessible | Describes the binding between the VLAN interface and the DHCP server group in the domain mode. It supports the query, create, modify, and delete operations. The indexes of this entry are hwVlanIndex and hwDhcpDomainName. hwVlanIndex is imported from hwVlanMIBTable in HUAWEI-VLAN-MIB. hwDhcpDomainName is imported from hwDhcpDomainTable. | |
| I32 hwDhcpDomainServerInVlan | 1.3.6.1.4.1.2011.5.18.1.32.1.1 | Integer32 | read-write | Indicates the ID of the DHCP. It uses hwDhcpGroupID in hwDhcpGroupTable. Range: 0-19 |
| ROW hwDhcpDomainServerInVlanRowStatus | 1.3.6.1.4.1.2011.5.18.1.32.1.2 | RowStatus | read-create | Row status, used to configure the DHCP server group bound to a domain under a VLAN. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a binding between a domain under a VLAN to a DHCP server group 3. destroy(6) -delete the binding between a domain under a VLAN to the DHCP server group To create the binding between a domain under a VLAN to a DHCP server group, specify the index and hwDhcpDomainServerInVlan, set hwDhcpDomainServerInVlanRowStatus to createAndGo(4), and perform the set operation. To modify the binding between a domain under a VLAN to a DHCP server group, specify the index and hwDhcpDomainServerInVlan and perform the set operation. To delete the binding between a domain under a VLAN to the DHCP server group, specify the index and hwDhcpDomainServerInVlan, set hwDhcpDomainServerInVlanRowStatus to destroy(6), and perform the set operation. In the query operation, the value of this leaf is always active(1). |
| hwDhcpMacServerInVlanTable | 1.3.6.1.4.1.2011.5.18.1.33 | not-accessible | Describes the binding between the VLAN interface and the DHCP server group in the MAC-range mode. It supports the create, modify, delete, and query operations. The indexes of this table are hwVlanIndex and hwDhcpMacRangeName. hwVlanIndex is imported from hwVlanMIBTable in HUAWEI-VLAN-MIB. hwDhcpMacRangeName is imported from hwDhcpMacRangeTable. | |
| hwDhcpMacServerInVlanEntry | 1.3.6.1.4.1.2011.5.18.1.33.1 | not-accessible | Describes the binding between the VLAN interface and the DHCP server group in the MAC-range mode. It supports the create, modify, delete, and query operations. The indexes of this entry are hwVlanIndex and hwDhcpMacRangeName. hwVlanIndex is imported from hwVlanMIBTable in HUAWEI-VLAN-MIB. hwDhcpMacRangeName is imported from hwDhcpMacRangeTable. | |
| I32 hwDhcpMacServerInVlan | 1.3.6.1.4.1.2011.5.18.1.33.1.1 | Integer32 | read-write | Indicates the ID of the DHCP. It uses hwDhcpGroupID in hwDhcpGroupTable. Range: 0-19 |
| ROW hwDhcpMacServerInVlanRowStatus | 1.3.6.1.4.1.2011.5.18.1.33.1.2 | RowStatus | read-create | Row status, used to configure the gateway IP address to which the MAC-range is bound. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create the binding between the MAC-range and the gateway IP address 3. destroy(6) -delete the binding between the MAC-range and the gateway IP address To create the binding between the MAC-range and the gateway IP address, specify the index first. The index is in the format of VLAN ID+MAC-range character length+ASCII value of each character. For example, to configure the DHCP server group for MAC-range 'abc' under VLAN1, the index value is 1.3.97.98.99. Then, specify hwDhcpMacServerInVlan, set hwDhcpMacServerInVlanRowStatus to createAndGo(4), and perform the set operation. To modify the binding between the MAC-range and the gateway IP address, specify the index and hwDhcpMacServerInVlan and perform the set operation. In the query operation, the value of this leaf is always active(1). To delete the binding between the MAC-range and the gateway IP address, specify the index and hwDhcpMacServerInVlan, set hwDhcpMacServerInVlanRowStatus to destroy(6), and perform the set operation. |
| INT hwDhcpRelayInterfaceSrcip | 1.3.6.1.4.1.2011.5.18.1.34 | INTEGER | read-write | Configures or queries the filling mode of the source IP address of the current DHCP-relay upstream packet. Options: 1. receive(1) -indicates that in the DHCP packet sent from the relay to the server, the source IP address is set to the IP address of the Rx interface (user-side interface). 2. send(2) -indicates that in the DHCP packet sent from the relay to the server, the source IP address is set to the IP address of the Tx interface (network-side interface). Default: receive(1) |
| INT hwDhcpRelayInterfaceRelayAgent | 1.3.6.1.4.1.2011.5.18.1.35 | INTEGER | read-write | Configures or queries the filling mode of the GIADDR field of the current DHCP-relay upstream packet. Options: 1. receive(1) -indicates that in the DHCP packet sent from the DHCP relay to the server, the gateway IP address is set to the IP address of the Rx interface (user-side interface). 2. send(2) -indicates that in the DHCP packet sent from the DHCP relay to the server, the gateway IP address is set to the IP address of the Tx interface (network-side interface). Default: receive(1) |
| hwDhcpSmltTable | 1.3.6.1.4.1.2011.5.18.1.36 | not-accessible | Used to start and stop the DHCP emulation test and query the DHCP emulation test result. The index of this table is hwDhcpSmltIndex. | |
| hwDhcpSmltEntry | 1.3.6.1.4.1.2011.5.18.1.36.1 | not-accessible | Used to start and stop the DHCP emulation test and query the DHCP emulation test result. The index of this entry is hwDhcpSmltIndex. | |
| I32 hwDhcpSmltIndex | 1.3.6.1.4.1.2011.5.18.1.36.1.1 | Integer32 | read-write | Indicates the index of a simulation user. Range: 1-255 Currently, the system supports only one simulation user. |
| I32 hwDhcpSmltServicePortId | 1.3.6.1.4.1.2011.5.18.1.36.1.2 | Integer32 | read-write | Indicates the index of the service port. The service port index here is 1 greater than the service port index queried through the CLI. |
| OCT hwDhcpSmltOption60 | 1.3.6.1.4.1.2011.5.18.1.36.1.3 | OCTET STRING | read-write | Indicates the DHCP option 60 field. If the DHCP option 60 is not configured, the default configuration of the L3 interface is adopted. A string of 0-32 characters is supported. |
| I32 hwDhcpSmltOverTime | 1.3.6.1.4.1.2011.5.18.1.36.1.4 | Integer32 | read-write | Indicates the simulation timeout time. Range: 5-60 Default: 5 Unit: second |
| G32 hwDhcpSmltResult | 1.3.6.1.4.1.2011.5.18.1.36.1.5 | Gauge32 | read-only | Indicates the DHCP simulation result. 0: Indicates that the DHCP simulation is successful. 6921509: Indicates the DHCP simulation is being performed. 6921510: Indicates that the DHCP simulation fails due to timeout. |
| DAT hwDhcpSmltStartTime | 1.3.6.1.4.1.2011.5.18.1.36.1.6 | DateAndTime | read-only | Indicates the start time of the DHCP simulation. |
| DAT hwDhcpSmltEndTime | 1.3.6.1.4.1.2011.5.18.1.36.1.7 | DateAndTime | read-only | Indicates the end time of the DHCP simulation. |
| IP hwDhcpSmltUserIp | 1.3.6.1.4.1.2011.5.18.1.36.1.8 | IpAddress | read-only | Indicates the IP address obtained by the DHCP client. |
| IP hwDhcpSmltSubNetMask | 1.3.6.1.4.1.2011.5.18.1.36.1.9 | IpAddress | read-only | Indicates the subnet mask of the IP address obtained by the DHCP client. |
| IP hwDhcpSmltDhcpServerIp | 1.3.6.1.4.1.2011.5.18.1.36.1.10 | IpAddress | read-only | Indicates the IP address of the DHCP server. |
| IP hwDhcpSmltDnsServerIp | 1.3.6.1.4.1.2011.5.18.1.36.1.11 | IpAddress | read-only | Indicates the IP address of the primary DNS server. |
| OCT hwDhcpSmltDnsServerName | 1.3.6.1.4.1.2011.5.18.1.36.1.12 | OCTET STRING | read-only | Indicates the name of the DNS server. |
| IP hwDhcpSmltSecondaryDnsServerIp | 1.3.6.1.4.1.2011.5.18.1.36.1.13 | IpAddress | read-only | Indicates the IP address of the secondary DNS server. |
| IP hwDhcpSmltGatewayIp | 1.3.6.1.4.1.2011.5.18.1.36.1.14 | IpAddress | read-only | Indicates the IP address of the gateway. |
| ROW hwDhcpSmltRowStatus | 1.3.6.1.4.1.2011.5.18.1.36.1.15 | RowStatus | read-create | Indicates the row status, used for starting and stopping the DHCP simulation. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -start the DHCP simulation 3. destroy(6) -stop the DHCP simulation To start the DHCP simulation, input the index of the service port, set hwDhcpSmltRowStatus to createAndGo(4), and perform the set operation. To stop the DHCP simulation, input the simulation index, set hwDhcpSmltRowStatus to destroy(6), and perform the set operation. During the query operation, the value of this leaf is always active(1). |
| INT hwDhcpClientSystemAutoConfigStatus | 1.3.6.1.4.1.2011.5.18.1.37 | INTEGER | read-write | Set the system auto-config status Options: 1. enable(1) -indicates the system auto-config is enabled 2. disable(2) -indicates the system auto-config is disabled |
| hwDhcpMessagesStatisticsTable | 1.3.6.1.4.1.2011.5.18.1.38 | not-accessible | Queries and resets the statistics of transmitted and received DHCP L3 relay packets. The index of this table is ifIndex, and the value of the index must be 0. | |
| hwDhcpMessagesStatisticsEntry | 1.3.6.1.4.1.2011.5.18.1.38.1 | not-accessible | Queries and resets the statistics of transmitted and received DHCP L3 relay packets. The index of this entry is ifIndex, and the value of the index must be 0. | |
| C32 hwDhcpL3Option82ReceiveUntrust | 1.3.6.1.4.1.2011.5.18.1.38.1.1 | Counter32 | read-only | Indicates the total number of received DHCP packets containing the untrust option 82 information. |
| C32 hwDhcpL3Option82ReceiveOverLength | 1.3.6.1.4.1.2011.5.18.1.38.1.2 | Counter32 | read-only | Indicates the total number of DHCP packets that exceeds the maximum packet length after the option 82 information is added. |
| C32 hwDhcpL3Option82ReceiveOverMaxMessagesSize | 1.3.6.1.4.1.2011.5.18.1.38.1.3 | Counter32 | read-only | Indicates the total number of DHCP packets that exceeds the maximum option 82 length after the option 82 information is added. |
| C32 hwDhcpMessagesReceiveOffer | 1.3.6.1.4.1.2011.5.18.1.38.1.4 | Counter32 | read-only | Indicates the total number of received DHCP offer packets. |
| C32 hwDhcpMessagesReceiveAck | 1.3.6.1.4.1.2011.5.18.1.38.1.5 | Counter32 | read-only | Indicates the total number of received DHCP ACK packets. |
| C32 hwDhcpMessagesReceiveNak | 1.3.6.1.4.1.2011.5.18.1.38.1.6 | Counter32 | read-only | Indicates the total number of received DHCP NAK packets. |
| C32 hwDhcpMessagesReceiveDecline | 1.3.6.1.4.1.2011.5.18.1.38.1.7 | Counter32 | read-only | Indicates the total number of received DHCP decline packets. |
| C32 hwDhcpMessagesReceiveDiscover | 1.3.6.1.4.1.2011.5.18.1.38.1.8 | Counter32 | read-only | Indicates the total number of received DHCP discover packets. |
| C32 hwDhcpMessagesReceiveInform | 1.3.6.1.4.1.2011.5.18.1.38.1.9 | Counter32 | read-only | Indicates the total number of received DHCP inform packets. |
| C32 hwDhcpMessagesReceiveRelease | 1.3.6.1.4.1.2011.5.18.1.38.1.10 | Counter32 | read-only | Indicates the total number of received DHCP release packets. |
| C32 hwDhcpMessagesReceiveRequest | 1.3.6.1.4.1.2011.5.18.1.38.1.11 | Counter32 | read-only | Indicates the total number of received DHCP request packets. |
| C32 hwDhcpMessagesReceiveForceRenew | 1.3.6.1.4.1.2011.5.18.1.38.1.12 | Counter32 | read-only | Indicates the total number of received DHCP FORCERENEW packets. |
| C32 hwDhcpMessagesReceiveProxyPktAck | 1.3.6.1.4.1.2011.5.18.1.38.1.13 | Counter32 | read-only | Indicates the total number of DHCP ACK packets sent by the proxy. |
| C32 hwDhcpMessagesReceiveProxyPktRelease | 1.3.6.1.4.1.2011.5.18.1.38.1.14 | Counter32 | read-only | Indicates the total number of DHCP release packets sent by the proxy. |
| C32 hwDhcpMACConflictNum | 1.3.6.1.4.1.2011.5.18.1.38.1.15 | Counter32 | read-only | Indicates the total number of packets that have MAC address conflict. |
| C32 hwDhcpSearchDownFailNum | 1.3.6.1.4.1.2011.5.18.1.38.1.16 | Counter32 | read-only | Indicates the total number of ACK packets whose corresponding users cannot be found. |
| C32 hwDhcpUserNotZeroGiaddrPktNum | 1.3.6.1.4.1.2011.5.18.1.38.1.17 | Counter32 | read-only | Indicates the total number of packets whose DHCP DISCOVER and REQUEST 'giaddr' are not zero on the user side. |
| INT hwDhcpMessagesStatisticsClear | 1.3.6.1.4.1.2011.5.18.1.38.1.18 | INTEGER | read-write | Resets the DHCP packet statistics. Options: 1. clear(1) -resets the DHCP packet statistics |
| hwDhcpProxyVbOids | 1.3.6.1.4.1.2011.5.18.1.39 | |||
| I32 hwDhcpSmltRequestID | 1.3.6.1.4.1.2011.5.18.1.39.1 | Integer32 | accessible-for-notify | The Request ID of DHCP simulation. |
| IP hwDhcpConfilctIpAddress | 1.3.6.1.4.1.2011.5.18.1.39.2 | IpAddress | accessible-for-notify | The conflicting IP address got by DHCP. |
| IP hwDhcpConfilctIpAddressMask | 1.3.6.1.4.1.2011.5.18.1.39.3 | IpAddress | accessible-for-notify | The sub net mask of the conflicting IP address got by DHCP. |
| hwDhcpFlowStatisticsTable | 1.3.6.1.4.1.2011.5.18.1.40 | not-accessible | Queries and resets the statistics of dhcp packets on flow. The index of this table is hwDhcpFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported at the same time. | |
| hwDhcpFlowStatisticsEntry | 1.3.6.1.4.1.2011.5.18.1.40.1 | not-accessible | Queries and resets the statistics of dhcp packets on flow. The index of this entry is hwDhcpFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported at the same time. | |
| U32 hwDhcpFlowStatisticsIndex | 1.3.6.1.4.1.2011.5.18.1.40.1.1 | Unsigned32 | not-accessible | The index of the dhcp flow statistics table. Indicates service port ID. |
| ROW hwDhcpFlowStatisticsRowStatus | 1.3.6.1.4.1.2011.5.18.1.40.1.2 | RowStatus | read-create | Indicates the row status, used for enabling and disabling the DHCP statistics on flow. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -enable the DHCP statistics on flow. 3. destroy(6) -disable the DHCP statistics on flow. To start the DHCP statistics on flow, input the hwDhcpFlowStatisticsIndex, set hwDhcpFlowStatisticsRowStatus to createAndGo(4), and perform the set operation. To stop the DHCP statistics on flow, input the hwDhcpFlowStatisticsIndex, set hwDhcpFlowStatisticsRowStatus to destroy(6), and perform the set operation. During the query operation, the value of this leaf is always active(1). |
| INT hwDhcpFlowStatisticsOperMode | 1.3.6.1.4.1.2011.5.18.1.40.1.3 | INTEGER | read-write | Reset the DHCP flow statistics. Options: 1. reset(1) -Reset the DHCP flow statistics. 2. invalid(2) -In get operation, the invalid(2) will be returned. |
| U32 hwDhcpFlowStatisticsReceiveDiscover | 1.3.6.1.4.1.2011.5.18.1.40.1.4 | Unsigned32 | read-only | Number of received DHCP discover packets. |
| U32 hwDhcpFlowStatisticsReceiveOffer | 1.3.6.1.4.1.2011.5.18.1.40.1.5 | Unsigned32 | read-only | Number of received DHCP offer packets. |
| U32 hwDhcpFlowStatisticsReceiveRequest | 1.3.6.1.4.1.2011.5.18.1.40.1.6 | Unsigned32 | read-only | Number of received DHCP request packets. |
| U32 hwDhcpFlowStatisticsReceiveDecline | 1.3.6.1.4.1.2011.5.18.1.40.1.7 | Unsigned32 | read-only | Number of received DHCP decline packets. |
| U32 hwDhcpFlowStatisticsReceiveAck | 1.3.6.1.4.1.2011.5.18.1.40.1.8 | Unsigned32 | read-only | Number of received DHCP ack packets. |
| U32 hwDhcpFlowStatisticsReceiveNak | 1.3.6.1.4.1.2011.5.18.1.40.1.9 | Unsigned32 | read-only | Number of received DHCP nack packets. |
| U32 hwDhcpFlowStatisticsReceiveRelease | 1.3.6.1.4.1.2011.5.18.1.40.1.10 | Unsigned32 | read-only | Number of received DHCP release packets. |
| U32 hwDhcpFlowStatisticsReceiveInform | 1.3.6.1.4.1.2011.5.18.1.40.1.11 | Unsigned32 | read-only | Number of received DHCP inform packets. |
| U32 hwDhcpFlowStatisticsReceiveRenew | 1.3.6.1.4.1.2011.5.18.1.40.1.12 | Unsigned32 | read-only | Number of received DHCP renew packets. |
| U32 hwDhcpFlowStatisticsSendDiscover | 1.3.6.1.4.1.2011.5.18.1.40.1.13 | Unsigned32 | read-only | Number of sent DHCP discover packets. |
| U32 hwDhcpFlowStatisticsSendOffer | 1.3.6.1.4.1.2011.5.18.1.40.1.14 | Unsigned32 | read-only | Number of sent DHCP offer packets. |
| U32 hwDhcpFlowStatisticsSendRequest | 1.3.6.1.4.1.2011.5.18.1.40.1.15 | Unsigned32 | read-only | Number of sent DHCP request packets. |
| U32 hwDhcpFlowStatisticsSendDecline | 1.3.6.1.4.1.2011.5.18.1.40.1.16 | Unsigned32 | read-only | Number of sent DHCP decline packets. |
| U32 hwDhcpFlowStatisticsSendAck | 1.3.6.1.4.1.2011.5.18.1.40.1.17 | Unsigned32 | read-only | Number of sent DHCP ack packets. |
| U32 hwDhcpFlowStatisticsSendNak | 1.3.6.1.4.1.2011.5.18.1.40.1.18 | Unsigned32 | read-only | Number of sent DHCP nack packets. |
| U32 hwDhcpFlowStatisticsSendRelease | 1.3.6.1.4.1.2011.5.18.1.40.1.19 | Unsigned32 | read-only | Number of sent DHCP release packets. |
| U32 hwDhcpFlowStatisticsSendInform | 1.3.6.1.4.1.2011.5.18.1.40.1.20 | Unsigned32 | read-only | Number of sent DHCP inform packets. |
| U32 hwDhcpFlowStatisticsSendRenew | 1.3.6.1.4.1.2011.5.18.1.40.1.21 | Unsigned32 | read-only | Number of sent DHCP renew packets. |
| U32 hwDhcpFlowStatisticsReceiveUnknownType | 1.3.6.1.4.1.2011.5.18.1.40.1.22 | Unsigned32 | read-only | Number of received unknown type DHCP packets. |
| U32 hwDhcpFlowStatisticsTagTooLong | 1.3.6.1.4.1.2011.5.18.1.40.1.23 | Unsigned32 | read-only | Number of DHCP packets which option length is over 255. |
| U32 hwDhcpFlowStatisticsFrameTooLong | 1.3.6.1.4.1.2011.5.18.1.40.1.24 | Unsigned32 | read-only | Number of DHCP packets which packet length is over max length after adding options. The defalut value of DHCP packet max length is 1500 bytes. |
| U32 hwDhcpFlowStatisticsReceiveUntrust | 1.3.6.1.4.1.2011.5.18.1.40.1.25 | Unsigned32 | read-only | Number of DHCP packets with untrusty options. |
| U32 hwDhcpFlowStatisticsReceiveWithGiaddr | 1.3.6.1.4.1.2011.5.18.1.40.1.26 | Unsigned32 | read-only | Number of DHCP packets which giaddr is not zero. |
| INT hwDhcpReverse | 1.3.6.1.4.1.2011.5.18.1.41 | INTEGER | read-write | Indicates the status of the global reverse DHCP packets switch. Options: 1. enable(1) -indicates the reverse DHCP L2 packets are forwarded. 2. disable(2) -indicates the reverse DHCP L2 packets are dropped. Default: disable(2) |
| hwDhcpProxyTraps | 1.3.6.1.4.1.2011.5.18.2 | |||
| hwDhcpProxyCommonTraps | 1.3.6.1.4.1.2011.5.18.2.1 | |||
| hwDhcpProxyCommonTrapsPrefix | 1.3.6.1.4.1.2011.5.18.2.1.0 | |||
| NTF hwDhcpSmltResultTrap | 1.3.6.1.4.1.2011.5.18.2.1.0.1 | This notification is generated when DHCP client has found network-side DHCP server or finding timeout. | ||
| hwDhcpProxyAlarmTraps | 1.3.6.1.4.1.2011.5.18.2.2 | |||
| hwDhcpProxyAlarmTrapsPrefix | 1.3.6.1.4.1.2011.5.18.2.2.0 | |||
| NTF hwIpConflictTrap | 1.3.6.1.4.1.2011.5.18.2.2.0.1 | This notification is generated when an IP address got by DHCP client for the interface conflicted with those assigned to other interfaces. |
RFC description
Manages Huawei DHCP attributes including L3 relay, DHCP proxy, Option82, user logging, and DHCP simulation functions.
Start monitoring Huawei switch or router (DHCP relay/proxy device) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.