All MIBs › HUAWEI-ADSLONLY-MIB
Category: Domain: DSL, Vendor: Huawei
Description: Huawei MIB for ADSL-only line boards providing configuration and status objects specific to pure ADSL (non-VDSL) line cards.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-ADSLONLY-MIB?
HUAWEI-ADSLONLY-MIB is a Huawei enterprise MIB for ADSL-only line boards, providing configuration and status objects specific to pure ADSL (as opposed to combo VDSL/ADSL) line cards in Huawei broadband access equipment. Its module description indicates it centers on a work-mode table for combo boards, suggesting it exposes per-port or per-board operating mode settings distinguishing ADSL-only operation. Given the very limited sample objects available (essentially just the module import and a top-level node), its detailed object structure cannot be fully confirmed, but its purpose is hardware/line-card configuration status monitoring, i.e., confirming which mode a DSL line card or port is running in. It is a vendor-specific extension used within Huawei's broader DSL/xDSL access management MIB family. It is deployed in Huawei DSLAM/broadband access equipment in telecom access networks delivering ADSL subscriber lines, where HUAWEI-ADSLONLY-MIB SNMP monitoring confirms each line card is running in the correct ADSL-only mode.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-ADSLONLY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei DSLAM/broadband access equipment with ADSL line boards
Monitoring Examples
Given the minimal sample objects provided (only the hwAdslOnly top-level node), a detailed table/object-level monitoring scenario cannot be responsibly constructed; in practice an operator would query the board's work-mode object(s) under hwAdslOnly to confirm a line card is correctly operating in ADSL-only mode rather than combo mode, but the specific table names are unconfirmed from the available data.
What Can Be Monitored
- line board/port work mode (ADSL-only vs combo)
Imported Objects
From HUAWEI-DEVICE-MIB
| hwDev | MODULE-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
OIDs
RFC description
Manages Huawei IPDSLAM ADSL-only combo board work modes. Provides slot configuration for ADSL line termination and profile management.
Start monitoring Huawei DSLAM/broadband access equipment with ADSL-only line boards with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.