HPNSAREMOTEASSIST-MIB

All MIBs › HPNSAREMOTEASSIST-MIB

Category: Domain: Server Hardware, Vendor: HP/HPE

Description: Manages HP NetServer Agent Remote Assist (iLO predecessor) out-of-band management capabilities on HP ProLiant servers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPNSAREMOTEASSIST-MIB?

HPNSAREMOTEASSIST-MIB is a legacy HP (Compaq/NetServer, enterprise OID 11) proprietary MIB reporting Remote Assistant (out-of-band management card) hardware status on legacy HP servers. Its objects cover MIB/agent revision, board type/name/ID/version, measured temperature with warn/graceful-shutdown/critical-shutdown limits, a voltage table (measured value, low/high limits per rail), and bus-usage 5-second/15-second/1-minute averages. As a hardware-status MIB it lets an administrator watch temperature and voltage-rail readings against shutdown thresholds via the out-of-band management card, even if the host OS is unresponsive. It is deployed on legacy HP (Compaq NetServer) servers with a Remote Assistant card. Engineers can download the HPNSAREMOTEASSIST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPNSAREMOTEASSIST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy HP (Compaq NetServer) servers (Remote Assistant card)

Monitoring Examples

An administrator monitors hpnsaRATempMeasured against hpnsaRATempCriticalSDLimit via the out-of-band Remote Assistant card to catch an overheating legacy HP server even if its OS has become unresponsive.

What Can Be Monitored

out-of-band temperature/voltage monitoring

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpnsaRemoteAssist	1.3.6.1.4.1.11.2.23.8
hpnsaRAMibRev	1.3.6.1.4.1.11.2.23.8.1
INT hpnsaRAMibRevMajor	1.3.6.1.4.1.11.2.23.8.1.1	INTEGER	read-only	The major revision level of the MIB.
INT hpnsaRAMibRevMinor	1.3.6.1.4.1.11.2.23.8.1.2	INTEGER	read-only	The minor revision level of the MIB.
hpnsaRAAgent	1.3.6.1.4.1.11.2.23.8.2
hpnsaRAAgentTable	1.3.6.1.4.1.11.2.23.8.2.1		not-accessible	A table of SNMP agents that satisfy requests for this MIB.
hpnsaRAAgentEntry	1.3.6.1.4.1.11.2.23.8.2.1.1		not-accessible	A description of the agents that access related information in HP Remote Assistant.
INT hpnsaRAAgentIndex	1.3.6.1.4.1.11.2.23.8.2.1.1.1	INTEGER	read-only	A unique index for this module description.
STR hpnsaRAAgentName	1.3.6.1.4.1.11.2.23.8.2.1.1.2	DisplayString	read-only	Name of the agent/agents satisfying SNMP requests for this MIB.
STR hpnsaRAAgentVersion	1.3.6.1.4.1.11.2.23.8.2.1.1.3	DisplayString	read-only	Version number of the agent/agents satisfying SNMP requests for this MIB.
OCT hpnsaRAAgentDate	1.3.6.1.4.1.11.2.23.8.2.1.1.4	OCTET STRING	read-only	The date on which this agent was created. field octets contents range ------------------------------------------------- 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59
hpnsaRAInfo	1.3.6.1.4.1.11.2.23.8.3
STR hpnsaRAInfoBoardType	1.3.6.1.4.1.11.2.23.8.3.1	DisplayString	read-only	A description of the type of HP Remote Assistant board.
STR hpnsaRAInfoBoardName	1.3.6.1.4.1.11.2.23.8.3.2	DisplayString	read-only	The server name configured on the HP Remote Assistant board.
INT hpnsaRAInfoBoardID	1.3.6.1.4.1.11.2.23.8.3.3	INTEGER	read-only	The server ID configured on the HP Remote Assistant board.
STR hpnsaRAInfoBoardVersion	1.3.6.1.4.1.11.2.23.8.3.4	DisplayString	read-only	The HP Remote Assistant firmware version.
hpnsaRATemp	1.3.6.1.4.1.11.2.23.8.4
INT hpnsaRATempMeasured	1.3.6.1.4.1.11.2.23.8.4.1	INTEGER	read-only	Current temperature in degrees Celsius as measured by the HP Remote Assistant on-board sensor.
INT hpnsaRATempWarnLimit	1.3.6.1.4.1.11.2.23.8.4.2	INTEGER	read-only	Temperature warning threshold value in degrees Celsius for the HP Remote Assistant on-board sensor.
INT hpnsaRATempGracefulSDLimit	1.3.6.1.4.1.11.2.23.8.4.3	INTEGER	read-only	Graceful shutdown temperature threshold value in degrees Celsius for the HP Remote Assistant on-board sensor.
INT hpnsaRATempCriticalSDLimit	1.3.6.1.4.1.11.2.23.8.4.4	INTEGER	read-only	Critical shutdown temperature threshold value in degrees Celsius for the HP Remote Assistant on-board sensor.
hpnsaRAVolt	1.3.6.1.4.1.11.2.23.8.5
hpnsaRAVoltTable	1.3.6.1.4.1.11.2.23.8.5.1		not-accessible	A table of HP Remote Assistant voltage entries.
hpnsaRAVoltEntry	1.3.6.1.4.1.11.2.23.8.5.1.1		not-accessible	HP Remote Assistant voltage information.
INT hpnsaRAVoltTypeIndex	1.3.6.1.4.1.11.2.23.8.5.1.1.1	INTEGER	read-only	A unique index for each voltage level.
STR hpnsaRAVoltMeasured	1.3.6.1.4.1.11.2.23.8.5.1.1.2	DisplayString	read-only	The measured value for the particular voltage level in volts.
STR hpnsaRAVoltLoLimit	1.3.6.1.4.1.11.2.23.8.5.1.1.3	DisplayString	read-only	The low threshold value in volts at which HP Remote Assistant pages the configured administrator.
STR hpnsaRAVoltHiLimit	1.3.6.1.4.1.11.2.23.8.5.1.1.4	DisplayString	read-only	The high threshold value in volts at which HP Remote Assistant pages the configured administrator.
hpnsaRABusUsage	1.3.6.1.4.1.11.2.23.8.6
INT hpnsaRABusUsage5SecAve	1.3.6.1.4.1.11.2.23.8.6.1	INTEGER	read-only	The EISA bus utilization averaged over the last 5 seconds.
INT hpnsaRABusUsage15SecAve	1.3.6.1.4.1.11.2.23.8.6.2	INTEGER	read-only	The EISA bus utilization averaged over the last 15 seconds.
INT hpnsaRABusUsage1MinAve	1.3.6.1.4.1.11.2.23.8.6.3	INTEGER	read-only	The EISA bus utilization averaged over the last minute.
INT hpnsaRABusUsage5MinAve	1.3.6.1.4.1.11.2.23.8.6.4	INTEGER	read-only	The EISA bus utilization averaged over the last 5 minutes.
INT hpnsaRABusUsageLimit	1.3.6.1.4.1.11.2.23.8.6.5	INTEGER	read-only	The EISA bus utilization threshold value at which HP Remote Assistant pages the configured administrator. HP Remote Assistant compares this threshold with the 5 minute average.
hpnsaRALog	1.3.6.1.4.1.11.2.23.8.7
hpnsaRALogTable	1.3.6.1.4.1.11.2.23.8.7.1		not-accessible	A table of HP Remote Assistant log entries.
hpnsaRALogEntry	1.3.6.1.4.1.11.2.23.8.7.1.1		not-accessible	HP Remote Assistant log information.
INT hpnsaRALogIndex	1.3.6.1.4.1.11.2.23.8.7.1.1.1	INTEGER	read-only	A unique index for each log entry.
INT hpnsaRALogEventCode	1.3.6.1.4.1.11.2.23.8.7.1.1.2	INTEGER	read-only	The code for the logged event. Refer to the HP Remote Assistant User's Manual for event code descriptions.
STR hpnsaRALogDescription	1.3.6.1.4.1.11.2.23.8.7.1.1.3	DisplayString	read-only	A description of the logged event.
INT hpnsaRALogViewed	1.3.6.1.4.1.11.2.23.8.7.1.1.4	INTEGER	read-only	Indicates whether this log entry is new or has been previously viewed.
OCT hpnsaRALogDateTime	1.3.6.1.4.1.11.2.23.8.7.1.1.5	OCTET STRING	read-only	The date on which the event occured. octets contents range -------------------------------------------- 1 years since 1900 0..255 2 month 1..12 3 day 1..31 4 hour 0..23 5 minute 0..59 6 second 0..59
INT hpnsaRALogData	1.3.6.1.4.1.11.2.23.8.7.1.1.6	INTEGER	read-only	The data associated with the logged event.
hpnsaRAEventConfig	1.3.6.1.4.1.11.2.23.8.8
INT hpnsaRAEventConfigGlobal	1.3.6.1.4.1.11.2.23.8.8.1	INTEGER	read-write	Control for the HP Remote Assistant in-band traps. This is a global value that overrides all of the controls in this group. A value of 1 means all traps enabled; 0 means disabled.
INT hpnsaRAEventConfigVolt	1.3.6.1.4.1.11.2.23.8.8.2	INTEGER	read-write	Control for the HP Remote Assistant in-band voltage traps. A value of 1 means voltage traps enabled; 0 means disabled.
INT hpnsaRAEventConfigTemp	1.3.6.1.4.1.11.2.23.8.8.3	INTEGER	read-write	Control for the HP Remote Assistant in-band temperature traps. A value of 1 means temperature traps enabled; 0 means disabled.
INT hpnsaRAEventConfigAsr	1.3.6.1.4.1.11.2.23.8.8.4	INTEGER	read-write	Control for the HP Remote Assistant in-band ASR traps. A value of 1 means ASR traps enabled; 0 means disabled.
INT hpnsaRAEventConfigRemBoot	1.3.6.1.4.1.11.2.23.8.8.5	INTEGER	read-write	Control for the HP Remote Assistant in-band remote boot traps. A value of 1 means remote boot traps enabled; 0 means disabled.
INT hpnsaRAEventConfigBusUsage	1.3.6.1.4.1.11.2.23.8.8.6	INTEGER	read-write	Control for the HP Remote Assistant in-band EISA bus utilization traps. A value of 1 means bus utilization traps enabled; 0 means disabled.
INT hpnsaRAEventConfigRemAsst	1.3.6.1.4.1.11.2.23.8.8.7	INTEGER	read-write	Control for the other HP Remote Assistant in-band traps. A value of 1 means traps enabled; 0 means disabled.
INT hpnsaRAEventConfigTrapTest	1.3.6.1.4.1.11.2.23.8.8.8	INTEGER	read-write	Control for the HP Remote Assistant in-band test trap. A value of 1 means test trap enabled; 0 means disabled.
INT hpnsaRAEventConfigHostSys	1.3.6.1.4.1.11.2.23.8.8.9	INTEGER	read-write	Control for the HP Remote Assistant in-band host system traps. A value of 1 means host system traps enabled; 0 means disabled.

RFC description

Monitors HP remote assistance board metrics including temperature, voltage, bus usage, and event logs.

Start monitoring Legacy HP (Compaq NetServer) server with Remote Assistant out-of-band card with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPNSAREMOTEASSIST-MIB

What Is HPNSAREMOTEASSIST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description