HPN-ICF-EVB-MIB

All MIBs › HPN-ICF-EVB-MIB

Last Updated: 2012-12-21

Category: Technology: Bridging, Technology: Switching/L2, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Edge Virtual Bridging (EVB/IEEE 802.1Qbg) configuration for virtualized server edge connectivity on HP/Comware switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-EVB-MIB?

HPN-ICF-EVB-MIB is an HP Networking (Comware/H3C) vendor MIB implementing management for Edge Virtual Bridging (EVB, IEEE 802.1Qbg), a technology that lets a physical switch port coordinate virtual switching with a hypervisor's virtual machines. It exposes configuration objects for EVB bridge managers (their type, ID, and associated port) and per-port EVB settings, along with related Flex-10 port-partitioning objects. From a monitoring standpoint this MIB is primarily about software-defined edge-networking configuration state rather than classic hardware health, but the manager table's row status and the set-result scalar let an operator confirm whether EVB configuration operations succeeded or are pending, which is important for verifying virtualization-aware networking is correctly provisioned on a given port. It is explicitly built as an extension of the standard IEEE8021-EVB-MIB, adding vendor-specific manager and Flex-10 objects. It is typically deployed on HP/Comware access switches connecting to virtualized server hosts where VM traffic needs to be recognized and managed at the network edge. Network engineers evaluating or troubleshooting this functionality can download the HPN-ICF-EVB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-EVB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware access switch

Monitoring Examples

An administrator would inspect hpnicfEvbDefaultManagerTable (via hpnicfEvbManagerIndex, hpnicfEvbManagerType, hpnicfEvbManagerID, hpnicfEvbManagerPort) to confirm which EVB manager is bound to which port, and check hpnicfEvbManagerRowStatus to verify the manager entry is active rather than stuck in a notInService or notReady state. The hpnicfEvbPortConfigTable, keyed by hpnicfEvbPortNumber, would be polled to review per-port EVB settings, and hpnicfEvbSetResult would be checked after a configuration push to confirm the operation succeeded rather than silently failing.

What Can Be Monitored

EVB manager type/ID/port binding
manager row status
per-port EVB configuration
EVB configuration set result
Flex-10 port partitioning objects

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IEEE8021-TC-MIB

IEEE8021BridgePortNumber

From IF-MIB

InterfaceIndexOrZero

From Q-BRIDGE-MIB

VlanIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfEvb	1.3.6.1.4.1.11.2.14.11.15.2.134			EVB management information base for managing devices that support Ethernet Virtual Bridging. This MIB is an extension of IEEE8021-EVB-MIB.
hpnicfEvbSysObjects	1.3.6.1.4.1.11.2.14.11.15.2.134.1
INT hpnicfEvbSetResult	1.3.6.1.4.1.11.2.14.11.15.2.134.1.1	INTEGER	read-only	If a set operation on EVB-MIB-tables returns success, this object indicates the actual result of this operation. Otherwise, it is meaningless. unknown: The set operation on the node has been completed, but the result could only be got from the table which the set operation happended. processing: The set operation is in process. Another set operation cannot be performed at this time. success: The set operation has succeeded. failed: The set operation has failed.
hpnicfEvbDefaultManagerTable	1.3.6.1.4.1.11.2.14.11.15.2.134.1.2		not-accessible	A table that contains configuration information for the default Virtual Station Interface (VSI) manager.
hpnicfEvbDefaultManagerEntry	1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1		not-accessible	A list of objects containing information for the default VSI manager.
U32 hpnicfEvbManagerIndex	1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.1	Unsigned32	not-accessible	Index of the default manager table.
INT hpnicfEvbManagerType	1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.2	INTEGER	read-create	Type of the default VSI manager. ipv4: Specifies the IPv4 address of the default VSI manager. ipv6: Specifies the IPv6 address of the default VSI manager. name: Specifies the name of the default VSI manager, a case-insensitive string of 1 to 127 characters. local: Specifies the device as the default VSI manager.
OCT hpnicfEvbManagerID	1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.3	OCTET STRING	read-create	Default VSI manager. The value is zero-length string when the VSI manager type is 'local'.
U32 hpnicfEvbManagerPort	1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.4	Unsigned32	read-create	Port number of the default VSI manager. Optional when the VSI manager type is not 'local'. If the VSI manager type is 'local', it returns zero.
ROW hpnicfEvbManagerRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.5	RowStatus	read-create	Row status: CreateAndGo, Active, or Destroy.
hpnicfEvbPortObjects	1.3.6.1.4.1.11.2.14.11.15.2.134.2
hpnicfEvbPortConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.134.2.1		not-accessible	A table that contains configuration information for the EVB bridge port.
hpnicfEvbPortConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1		not-accessible	A list of objects containing information for the EVB bridge port.
IEE hpnicfEvbPortNumber	1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.1	IEEE8021BridgePortNumber	not-accessible	Port number.
U32 hpnicfEvbRWD	1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.2	Unsigned32	read-write	VDP resource wait delay exponent.
U32 hpnicfEvbRKA	1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.3	Unsigned32	read-write	VDP keepalive exponent.
hpnicfEvbSchannelConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.134.2.2		not-accessible	A table that contains configuration information for the S-channel.
hpnicfEvbSchannelConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1		not-accessible	A list of objects containing information for the S-channel.
U32 hpnicfEvbSchannelID	1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.1	Unsigned32	not-accessible	S-channel ID.
U32 hpnicfEvbSchannelSVLAN	1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.2	Unsigned32	read-create	S-VLAN ID. 0 means that the S-channel is not bound to any S-VLAN. 1 represents the SVID for the default S-channel S-channel 1.
T/F hpnicfEvbMacLearningStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.3	TruthValue	read-write	The MAC address learning function is enabled or not.
T/F hpnicfEvbRRStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.4	TruthValue	read-write	The RR mode for the S-channel is enabled or not.
ROW hpnicfEvbSchannelRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.5	RowStatus	read-create	Row status: CreateAndGo, Active, or Destroy.
hpnicfEvbVSIConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.134.2.3		not-accessible	A table that contains configuration information for the VSI.
hpnicfEvbVSIConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1		not-accessible	A list of objects containing information for the VSI.
IEE hpnicfEvbSBPPortNumber	1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.1	IEEE8021BridgePortNumber	not-accessible	The Station-facing Bridge Port (SBP) port number.
U32 hpnicfEvbVSILocalID	1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.2	Unsigned32	not-accessible	VSI local ID.
INT hpnicfEvbVSICommand	1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.3	INTEGER	read-create	This object indicates the association or pre-associate property of the VSI.
NUM hpnicfEvbVSIIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.4	InterfaceIndexOrZero	read-only	VSI interface index.
T/F hpnicfEvbVSIIsActive	1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.5	TruthValue	read-write	The VSI is activated or not. Activate a VSI after configuring a VSI filter, and deactivate a VSI before removing a VSI filter.
ROW hpnicfEvbVSIRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.6	RowStatus	read-create	Row status: CreateAndGo, Active, or Destroy.
hpnicfEvbVSIFilterConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.134.2.4		not-accessible	A table that contains configuration information for filters of the VSI.
hpnicfEvbVSIFilterConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1		not-accessible	A list of objects containing information for filters of the VSI.
U32 hpnicfEvbGroupID	1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.1	Unsigned32	not-accessible	Group ID.
MAC hpnicfEvbVSIMac	1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.2	MacAddress	not-accessible	The MAC address part of the MAC/VLANs for a VSI.
VLA hpnicfEvbVSIVlanId	1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.3	VlanIndex	not-accessible	The VLAN ID part of the MAC/VLANs for a VSI.
ROW hpnicfEvbVSIFilterRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.4	RowStatus	read-create	Row status: CreateAndGo, Active, or Destroy.
hpnicfFlex10Objects	1.3.6.1.4.1.11.2.14.11.15.2.134.3
hpnicfFlex10PortConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.134.3.1		not-accessible	A table that contains configuration information for the flex10 bridge port.
hpnicfFlex10PortConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1		not-accessible	A list of objects containing information for the flex10 bridge port.
IEE hpnicfFlex10PortNumber	1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1.1	IEEE8021BridgePortNumber	not-accessible	Port number.
T/F hpnicfFlex10PortEnableStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1.2	TruthValue	read-write	The flex10 function is enabled or not.
hpnicfFlex10RemoteSchannelTable	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2		not-accessible	A table that contains remote S-channel details.
hpnicfFlex10RemoteSchannelEntry	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1		not-accessible	A list of objects describing remote S-channels.
BIT hpnicfFlex10RemSchDesFormat	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.1	Bits	read-only	Description format of the remote S-channel.
I32 hpnicfFlex10RemSchTerminationType	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.2	Integer32	read-only	Termination type of the remote S-channel. 0: PCI Physical Function (Primary). 1: SRIOV Virtual Function. 2: PCI Physical Function (Secondary). 3: Virtual Switch Port. 4: NCSI Port. 2147483647: This value means a Description TLV with format 0 has not been received. other: Unknown termination type.
BIT hpnicfFlex10RemSchTerminationCap	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.3	Bits	read-only	Termination capabilities of the remote S-channel. If a Description TLV with format 0 has not been received, it returns all zeros.
BIT hpnicfFlex10RemSchTrafficClass	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.4	Bits	read-only	Traffic classes of the remote S-channel. If a Description TLV with format 0 has not been received, it returns all zeros.
I32 hpnicfFlex10RemSchCir	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.5	Integer32	read-only	Committed Information Rate (CIR) of the remote S-channel. If a Description TLV with format 0 has not been received, it returns 0.
I32 hpnicfFlex10RemSchPir	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.6	Integer32	read-only	Peak Information Rate (PIR) of the remote S-channel. If a Description TLV with format 0 has not been received, it returns 0.
OCT hpnicfFlex10RemSchConnectionID	1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.7	OCTET STRING	read-only	Connection instance ID of the remote S-channel. The value is a zero-length string if a Description TLV with format 1 has not been received. Otherwise it returns a string with length 16.
hpnicfFlex10SchannelLinkCtlTable	1.3.6.1.4.1.11.2.14.11.15.2.134.3.3		not-accessible	A table that contains link status information for the S-channel.
hpnicfFlex10SchannelLinkCtlEntry	1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1		not-accessible	A list of objects containing information for the S-channel.
VLA hpnicfFlex10SchannelSVID	1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.1	VlanIndex	read-only	S-VLAN ID for the S-channel.
INT hpnicfFlex10SchannelLocalStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.2	INTEGER	read-only	Link status of the local S-channel.
INT hpnicfFlex10SchannelRemoteStatus	1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.3	INTEGER	read-only	Link status of the remote S-channel.

RFC description

HP/HPE Ethernet Virtual Bridging (EVB) MIB for managing IEEE 802.1Qbg virtual station interfaces on network devices.

Start monitoring HP/H3C Comware access switch (Edge Virtual Bridging, 802.1Qbg) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-EVB-MIB

What Is HPN-ICF-EVB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description