HPNSACAGE-MIB

All MIBs › HPNSACAGE-MIB

Category: Domain: Server Hardware, Vendor: HP/HPE

Description: Monitors HP NetServer Agent server cage/enclosure hardware including bay status and presence detection on HP ProLiant.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPNSACAGE-MIB?

HPNSACAGE-MIB is part of the legacy HP NetServer Agent suite and covers the server cage/enclosure hardware, meaning drive bay presence and status detection within HP ProLiant server chassis. No module description or sample objects were available for this MIB, so its precise object list cannot be confirmed, but its name and category indicate it exposes physical hardware presence/status data for drive bays or enclosure slots. Its monitoring purpose is hardware status: detecting whether expected drive bays are populated, empty, or reporting a fault condition within the server cage. As part of the older HP NetServer Agent family it likely parallels sibling MIBs such as HPNSARPS-MIB and HPNSAASR-MIB in structure and indexing conventions. It would have been deployed on legacy HP NetServer/ProLiant servers for chassis/enclosure hardware inventory and fault monitoring. Engineers can download the HPNSACAGE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPNSACAGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP NetServer/ProLiant servers

Monitoring Examples

No sample objects were provided for this module, so a concrete object-level monitoring scenario cannot be responsibly constructed; in practice this MIB would be polled to detect drive bay presence/absence or enclosure fault conditions, but the exact table and object names are unconfirmed from the available data.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Opaque
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpCageAgt	1.3.6.1.4.1.11.2.23.28
INT hpCageAgtVersion	1.3.6.1.4.1.11.2.23.28.1	INTEGER	read-only	The current version (major) number of the SNMP agent.
INT hpCageAgtRevision	1.3.6.1.4.1.11.2.23.28.2	INTEGER	read-only	The current revision (minor) number of the SNMP agent.
INT hpCageAgtMibVersion	1.3.6.1.4.1.11.2.23.28.3	INTEGER	read-only	The current version (major) number of the SNMP agent's MIB.
INT hpCageAgtMibRevision	1.3.6.1.4.1.11.2.23.28.4	INTEGER	read-only	The current revision (minor) number of the SNMP agent's MIB.
INT hpCageAgtnDrieCages	1.3.6.1.4.1.11.2.23.28.5	INTEGER	read-only	The number of Starfish drive cages present on the system.
INT hpCageAgtcbDriveCageInfo	1.3.6.1.4.1.11.2.23.28.6	INTEGER	read-only	The number of bytes required to represent the drive cage information struucture.
OPA hpCageAgtDriveCageInfo	1.3.6.1.4.1.11.2.23.28.7	Opaque	read-only	The drive cage information structure, defining the state and addresses of each drive bay.
INT hpCageAgtDriveCageStatus	1.3.6.1.4.1.11.2.23.28.8	INTEGER	read-only	The result of the last query operation for drive cage data. This value is set by querying the hpCageAgtDriveCageInfo object.
INT hpCageAgtFlashAdptrType	1.3.6.1.4.1.11.2.23.28.9	INTEGER	read-write	The type of adapter to be flashed. This must be set prior to setting the flash count.
INT hpCageAgtFlashAdptrNum	1.3.6.1.4.1.11.2.23.28.10	INTEGER	read-write	The adapter number to be flashed. This must be set prior to setting the flash count.
INT hpCageAgtChannelNum	1.3.6.1.4.1.11.2.23.28.11	INTEGER	read-write	The channel number to be flashed. This must be set prior to setting the flash count.
INT hpCageAgtFlashCount	1.3.6.1.4.1.11.2.23.28.12	INTEGER	write-only	The number of times to activate the flashing of the LEDs. (See members 9, 10, and 11.)
INT hpCageAgtFlashStatus	1.3.6.1.4.1.11.2.23.28.13	INTEGER	read-only	The resulting status of the last setting of the flash count operation. If this value is 99999999, then the operation is still pending.
INT hpCageAgtnDrives	1.3.6.1.4.1.11.2.23.28.14	INTEGER	read-only	The number of hot-swap drives present on the system. Requery the nDriveCages field to recalculate this field.
hpCageAgtDriveTable	1.3.6.1.4.1.11.2.23.28.15		not-accessible	A list of the hot-swap drives present on the system.
hpCageAgtDriveEntry	1.3.6.1.4.1.11.2.23.28.15.1		not-accessible
INT hpCageAgtDriveIndex	1.3.6.1.4.1.11.2.23.28.15.1.1	INTEGER	read-only	The index number of the drive.
INT hpCageAgtDriveI2cAddr	1.3.6.1.4.1.11.2.23.28.15.1.2	INTEGER	read-only	The IIC (I-square-C) bus address of the drive.
INT hpCageAgtDriveScsiID	1.3.6.1.4.1.11.2.23.28.15.1.3	INTEGER	read-only	The SCSI target ID of the drive (unique to the IIC bus).
INT hpCageAgtDriveLEDState	1.3.6.1.4.1.11.2.23.28.15.1.4	INTEGER	read-write	The state of the drive LED, which can be set to amber (on).
INT hpCageAgtDriveLEDSetStatus	1.3.6.1.4.1.11.2.23.28.15.1.5	INTEGER	read-only	The result of the last LED state change operation for this drive.
INT hpCageAgtDrivePresent	1.3.6.1.4.1.11.2.23.28.15.1.6	INTEGER	read-only	Is a drive present in this drive cage bay?
INT hpCageAgtCageChannel	1.3.6.1.4.1.11.2.23.28.15.1.7	INTEGER	read-only	The channel number on the SCSI adapter to which this cage is connected.
INT hpCageAgtCageAdapter	1.3.6.1.4.1.11.2.23.28.15.1.8	INTEGER	read-only	The port number of the SCSI adapter to which this cage is connected.
INT hpCageAgtCageType	1.3.6.1.4.1.11.2.23.28.15.1.9	INTEGER	read-only	The type of the hot-swap cage.
INT hpCageAgtTargetID	1.3.6.1.4.1.11.2.23.28.16	INTEGER	read-write	The channel number to be flashed. This must be set prior to setting the flash count.
INT hpCageAgtFlashOneCount	1.3.6.1.4.1.11.2.23.28.17	INTEGER	write-only	The number of times to activate the flashing of one LED. (See members 9, 10, 11, and 16.)
INT hpCageAgtFWStatus	1.3.6.1.4.1.11.2.23.28.18	INTEGER	read-only	The resulting status of the last firmware update operation. If this value is 99999999, then the operation is still pending.
INT hpCageAgtUpdateDriveFW	1.3.6.1.4.1.11.2.23.28.19	INTEGER	write-only	Set this value to the key 746E654Bh to begin updating firmware on drive indicated in SCSI ID. (See members 9, 10, 11, and 16.)
INT hpCageAgtDriveReadiness	1.3.6.1.4.1.11.2.23.28.20	INTEGER	read-only	Determine the state of readiness for the drive. (See members 9, 10, 11, and 16.)
STR hpCageAgtDownloadWwwUrl	1.3.6.1.4.1.11.2.23.28.21	DisplayString	read-write	Set this value to the URL to begin downloading. Check member 21 for progress and 22 for status.
INT hpCageAgtDownloadSize	1.3.6.1.4.1.11.2.23.28.22	INTEGER	read-only	Current size (in bytes) of the amount of data downloaded for this file. If less than 10 bytes reported, size is actually state info: (0 = no download, 1 = download in progress, 2 = download complete, 3 = download failed).
INT hpCageAgtDownloadStatus	1.3.6.1.4.1.11.2.23.28.23	INTEGER	read-only	The resulting status of the most recent (or current) WWW download operation. If this value is 99999999, then the operation is still pending.
STR hpCageAgtDownloadProxy	1.3.6.1.4.1.11.2.23.28.24	DisplayString	read-write	Set this value to the WWW proxy server spec (eg: WWW_PROXY.XXX.COM:8088).
INT hpCageAgtFormatDrive	1.3.6.1.4.1.11.2.23.28.25	INTEGER	write-only	Set this value to the key 6B72614Dh to begin formatting drive indicated in SCSI ID. (See members 9, 10, 11, and 16.)
INT hpCageAgtFormatStatus	1.3.6.1.4.1.11.2.23.28.26	INTEGER	read-write	The resulting status of the last formatoperation. If this value is 99999999, then the operation is still pending. If 99999990, then user input is pending allowing the operation locally.

RFC description

HP RAID cage LED control and drive monitoring for NetServer storage systems.

Start monitoring HP NetServer/ProLiant server (legacy drive-cage/enclosure presence) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPNSACAGE-MIB

What Is HPNSACAGE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description