All MIBs › HP-SWITCH-BASIC-CONFIG-MIB › hpSwitchStartupConfigSeqNum
hpSwitchStartupConfigSeqNum
Module: HP-SWITCH-BASIC-CONFIG-MIB
OID (symbolic): HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSeqNum
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This is the value of the global startup-config sequential number. Every change to startup-config increments the value by 1. Must be stored in non-volatile memory to be carried over the system boot.
What is hpSwitchStartupConfigSeqNum?
This is a global sequence number that increments by 1 every time the startup configuration changes, persisted in non-volatile memory so it survives reboots; admins can poll it to detect whether the startup-config has changed since a prior check without diffing the whole file.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9 snmpwalk -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSeqNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9.1 snmpget -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSeqNum.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9.1 i <value>
Start monitoring HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSeqNum OID value, configure state conditions and alerts, and monitor any HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29 | hpSwitchBasicConfigMIB | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1 | hpSwitchBasicConfigObjects | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9 | hpSwitchStartupConfigSeqNum | HP-SWITCH-BASIC-CONFIG-MIB |