All MIBs › HP-SWITCH-BASIC-CONFIG-MIB › hpSwitchSaveConfig
hpSwitchSaveConfig
Module: HP-SWITCH-BASIC-CONFIG-MIB
OID (symbolic): HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchSaveConfig
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When this object is set to to 'saveConfig' it results in saving the running configuration of the switch to flash. The saved configuration becomes the boot-up configuration of the switch when it boots next time. When read, this object always returns 'noConfigSave'.
What is hpSwitchSaveConfig?
Setting this read-write object to 'saveConfig(2)' writes the switch's current running configuration to flash so it becomes the configuration used on the next boot. A read always returns 'noConfigSave(1)' regardless of prior writes, so admins use this purely as a one-shot trigger rather than a status flag.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1 snmpwalk -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchSaveConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1.1 snmpget -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchSaveConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1.1 i <value>
Start monitoring HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchSaveConfig OID value, configure state conditions and alerts, and monitor any HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29 | hpSwitchBasicConfigMIB | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1 | hpSwitchBasicConfigObjects | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1 | hpSwitchSaveConfig | HP-SWITCH-BASIC-CONFIG-MIB |