All MIBs › HP-SWITCH-BASIC-CONFIG-MIB › hpSwitchRunningCfgChgTransmitInterval
hpSwitchRunningCfgChgTransmitInterval
Module: HP-SWITCH-BASIC-CONFIG-MIB
OID (symbolic): HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgTransmitInterval
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Specifies the transmission interval in seconds for sending running config change traps. Only one running config change trap is sent in this time interval. Default value is 0, indicating there is no limit on sending running config change traps.
What is hpSwitchRunningCfgChgTransmitInterval?
This sets, in seconds, the minimum spacing between running-config-change traps the switch will send, with a default of 0 meaning no rate limit is applied. Admins raise this value on switches with frequent config churn to avoid flooding a trap receiver with one notification per change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.2 snmpwalk -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgTransmitInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.2.1 snmpget -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgTransmitInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.2.1 i <value>
Start monitoring HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgTransmitInterval OID value, configure state conditions and alerts, and monitor any HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29 | hpSwitchBasicConfigMIB | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1 | hpSwitchBasicConfigObjects | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12 | hpSwitchRunningCfgChgObjects | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.2 | hpSwitchRunningCfgChgTransmitInterval | HP-SWITCH-BASIC-CONFIG-MIB |