All MIBs › HP-SWITCH-BASIC-CONFIG-MIB › hpSwitchControlPlaneProtectionAdminStatus
hpSwitchControlPlaneProtectionAdminStatus
Module: HP-SWITCH-BASIC-CONFIG-MIB
OID (symbolic): HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchControlPlaneProtectionAdminStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The operational status of the Control Plane Protection feature. When Control Plane Protection feature is enabled on a device, if the number of IP error packets exceed the threshold value they are dropped at the data plane. This eliminates the processing of error packets by control plane, thereby reducing the load on the CPU.
What is hpSwitchControlPlaneProtectionAdminStatus?
Setting this to 'enable(1)' turns on Control Plane Protection, which drops excess IP error packets at the data plane once they exceed a threshold, sparing the CPU from processing them; default is 'disable(2)'. Admins enable this on switches exposed to traffic that could otherwise flood the CPU with malformed or error packets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17 snmpwalk -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchControlPlaneProtectionAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17.1 snmpget -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchControlPlaneProtectionAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17.1 i <value>
Start monitoring HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchControlPlaneProtectionAdminStatus OID value, configure state conditions and alerts, and monitor any HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29 | hpSwitchBasicConfigMIB | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1 | hpSwitchBasicConfigObjects | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17 | hpSwitchControlPlaneProtectionAdminStatus | HP-SWITCH-BASIC-CONFIG-MIB |