All MIBs › HP-SWITCH-BASIC-CONFIG-MIB › hpSwitchAclLogtimeoutConfig
hpSwitchAclLogtimeoutConfig
Module: HP-SWITCH-BASIC-CONFIG-MIB
OID (symbolic): HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAclLogtimeoutConfig
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The time in seconds between ACL logging summary messages. Some devices may limit the range to 30..300.
What is hpSwitchAclLogtimeoutConfig?
This sets the interval, in seconds (1-65535, though some devices cap it at 30-300), between summary log messages the switch emits for ACL logging events. Admins tune this to control how frequently ACL hit-count summaries are written to the log rather than getting one message per matched packet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.1 snmpwalk -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAclLogtimeoutConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.1.1 snmpget -v2c -c public <target> HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAclLogtimeoutConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.1.1 i <value>
Start monitoring HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAclLogtimeoutConfig OID value, configure state conditions and alerts, and monitor any HP Networking switch (basic config, CLI aliases, ACL/IGMP-proxy) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29 | hpSwitchBasicConfigMIB | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1 | hpSwitchBasicConfigObjects | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3 | hpSwitchACLConfig | HP-SWITCH-BASIC-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.1 | hpSwitchAclLogtimeoutConfig | HP-SWITCH-BASIC-CONFIG-MIB |