All MIBs › HP-ICF-OSPFV3-MIB › hpicfOspfv3SetTrap
hpicfOspfv3SetTrap
Module: HP-ICF-OSPFV3-MIB
OID (symbolic): HP-ICF-OSPFV3-MIB::hpicfOspfv3SetTrap
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: A four-octet string serving as a bit map for the trap events defined by the OSPFv3 traps. This object is used to enable or disable specific OSPFv3 traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0. Trap Name BitMap ---------------------------------------- OSPFV3_IF_STATE_CHANGE 0x00001 OSPFV3_VIRT_IF_STATE_CHANGE 0x00002 OSPFV3_NBR_STATE_CHANGE 0x00004 OSPFV3_VIRT_NBR_STATE_CHANGE 0x00008 OSPFV3_INTF_CONFIG_ERROR 0x00010 OSPFV3_VIRT_INTF_CONFIG_ERROR 0x00020 OSPFV3_INTF_RCV_BAD_PKT 0x00040 OSPFV3_VIRT_INTF_RCV_BAD_PKT 0x00080 OSPFV3_RST_STATUS 0x20000 OSPFV3_NBR_RST_HELP_STATUS 0x40000 OSPFV3_VIRT_NBR_RST_HELP_STAT 0x80000 OSPFV3_ALL_TRAPS 0xE00FF
What is hpicfOspfv3SetTrap?
A four-octet bitmap enabling or disabling specific OSPFv3 traps, where a 1 bit enables the corresponding trap (e.g. 0x00001 for OSPFV3_IF_STATE_CHANGE, 0x00004 for OSPFV3_NBR_STATE_CHANGE, up to 0xE00FF for OSPFV3_ALL_TRAPS) as documented in the object's own bitmap table. An admin writes a specific combination here, rather than all traps, to receive only the OSPFv3 notification types relevant to their monitoring, such as interface and neighbor state changes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1 snmpwalk -v2c -c public <target> HP-ICF-OSPFV3-MIB::hpicfOspfv3SetTrap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1.1 snmpget -v2c -c public <target> HP-ICF-OSPFV3-MIB::hpicfOspfv3SetTrap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpicfOspfv3SetTrap.1
Start monitoring HP ProCurve Layer 3 switch/router (OSPFv3/IPv6 extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-OSPFV3-MIB::hpicfOspfv3SetTrap OID value, configure state conditions and alerts, and monitor any HP ProCurve Layer 3 switch/router (OSPFv3/IPv6 extensions) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.44 | hpicfOspfv3MIB | HP-ICF-OSPFV3-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1 | hpicfOspfv3Objects | HP-ICF-OSPFV3-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16 | hpicfOspfv3Trap | HP-ICF-OSPFV3-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1 | hpicfOspfv3TrapControl | HP-ICF-OSPFV3-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1 | hpicfOspfv3SetTrap | HP-ICF-OSPFV3-MIB |