All MIBs › HP-ICF-OSPFV3-MIB › hpicfOspfv3IntraAreaDistance
hpicfOspfv3IntraAreaDistance
Module: HP-ICF-OSPFV3-MIB
OID (symbolic): HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAreaDistance
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110.
Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area or AS-external routes even if hpicfOspfv3InterAreaDistance or hpicfOspfv3ExternalDistance is lower than hpicfOspfv3IntraAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
What is hpicfOspfv3IntraAreaDistance?
Sets the administrative distance (1-255, default 110) applied to intra-area routes learned by OSPFv3; lower distances are preferred over routes with the same destination learned from another source. Per the source description, this setting only affects preference against non-OSPF sources -- OSPF itself always prefers intra-area routes over inter-area or external ones regardless of these distance values. An admin lowers this distance to make OSPF intra-area routes win over, say, a statically configured route to the same prefix.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3 snmpwalk -v2c -c public <target> HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAreaDistance
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3.1 snmpget -v2c -c public <target> HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAreaDistance.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3.1 i <value>
Start monitoring HP ProCurve Layer 3 switch/router (OSPFv3/IPv6 extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAreaDistance OID value, configure state conditions and alerts, and monitor any HP ProCurve Layer 3 switch/router (OSPFv3/IPv6 extensions) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.44 | hpicfOspfv3MIB | HP-ICF-OSPFV3-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1 | hpicfOspfv3Objects | HP-ICF-OSPFV3-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1 | hpicfOspfv3GeneralGroup | HP-ICF-OSPFV3-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3 | hpicfOspfv3IntraAreaDistance | HP-ICF-OSPFV3-MIB |