All MIBs › HP-ICF-OPENFLOW-MIB › hpicfOpenFlowInstancePktInVlanTagging
hpicfOpenFlowInstancePktInVlanTagging
Module: HP-ICF-OPENFLOW-MIB
OID (symbolic): HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstancePktInVlanTagging
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This MIB object is used to configure the 802.1q tagging property for a packet encapsulated inside the OpenFlow packet-in header. A value of 0 (default) indicates the default behavior which is the packet encapsulated inside a packet-in message will be tagged in the following cases a) the instance type is aggregate. b) the instance is a named instance with more than one member VLAN. c) the instance is a named instance and the packet was received with a tag. It will be untagged in all other cases. A value of 1 (inputForm) directs the instance to send the encapsulated packet as it was received on the physical port. A value of 2 (tagAlways) directs the instance to send the encapsulated packet always with an 802.1q tag irrespective of how it was received on the physical port. A value of 3 (untagAlways) directs the instance to send the encapsulated packet always without an 802.1q tag irrespective of how it was received on the physical port.
What is hpicfOpenFlowInstancePktInVlanTagging?
This controls whether packets encapsulated in an OpenFlow packet-in message keep their original 802.1q tagging state, are always tagged, or are always untagged, overriding the switch's context-dependent default behavior. An admin sets this to 'tagAlways' when the controller application expects every packet-in to carry a VLAN tag regardless of how it arrived on the wire.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33 snmpwalk -v2c -c public <target> HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstancePktInVlanTagging
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33.1 snmpget -v2c -c public <target> HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstancePktInVlanTagging.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33.1 i <value>
Start monitoring HP ProCurve/HP Networking OpenFlow-enabled switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstancePktInVlanTagging OID value, configure state conditions and alerts, and monitor any HP ProCurve/HP Networking OpenFlow-enabled switch from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89 | hpicfOpenFlowMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1 | hpicfOpenFlowObjects | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4 | hpicfOpenFlowInstanceTable | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1 | hpicfOpenFlowInstanceEntry | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33 | hpicfOpenFlowInstancePktInVlanTagging | HP-ICF-OPENFLOW-MIB |