All MIBs › HP-ICF-OPENFLOW-MIB › hpicfOpenFlowInstanceOverrideProtocol
hpicfOpenFlowInstanceOverrideProtocol
Module: HP-ICF-OPENFLOW-MIB
OID (symbolic): HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceOverrideProtocol
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This MIB object is used to configure the Override protocol associated with the instance.
What is hpicfOpenFlowInstanceOverrideProtocol?
This is a bitmap letting an admin exempt specific control protocols (such as stp, lacp, dot1x, or udld) from the OpenFlow pipeline so the switch continues handling them natively instead of forwarding them to the controller. An admin would set the stp bit here to keep Spanning Tree running locally even while OpenFlow controls other traffic on the instance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32 snmpwalk -v2c -c public <target> HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceOverrideProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32.1 snmpget -v2c -c public <target> HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceOverrideProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32.1 s <value>
Start monitoring HP ProCurve/HP Networking OpenFlow-enabled switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceOverrideProtocol OID value, configure state conditions and alerts, and monitor any HP ProCurve/HP Networking OpenFlow-enabled switch from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89 | hpicfOpenFlowMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1 | hpicfOpenFlowObjects | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4 | hpicfOpenFlowInstanceTable | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1 | hpicfOpenFlowInstanceEntry | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32 | hpicfOpenFlowInstanceOverrideProtocol | HP-ICF-OPENFLOW-MIB |