All MIBs › HP-ICF-OPENFLOW-MIB › hpicfOpenFlowInstanceMissRuleDefaultAction
hpicfOpenFlowInstanceMissRuleDefaultAction
Module: HP-ICF-OPENFLOW-MIB
OID (symbolic): HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceMissRuleDefaultAction
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This MIB object is used to configure the flow miss action associated with the instance. A value of 0(none) indicates no flow miss action specified, which is to drop all unknown packets. A value of 1(drop) enables an instance to drop all unknown packets. A value of 2(normal) enables an instance to forward all unknown packets using non-OpenFlow pipeline. A value of 3(ctrl) enables an instance to forward all unknown packets to the OpenFlow controller.
What is hpicfOpenFlowInstanceMissRuleDefaultAction?
This sets what an OpenFlow instance does with a packet that matches no installed flow: drop it, forward it normally via the non-OpenFlow pipeline, or send it up to the controller. An admin sets this to 'ctrl' during initial SDN rollout so unmatched traffic reaches the controller for flow-rule creation instead of being silently dropped.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31 snmpwalk -v2c -c public <target> HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceMissRuleDefaultAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31.1 snmpget -v2c -c public <target> HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceMissRuleDefaultAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31.1 i <value>
Start monitoring HP ProCurve/HP Networking OpenFlow-enabled switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceMissRuleDefaultAction OID value, configure state conditions and alerts, and monitor any HP ProCurve/HP Networking OpenFlow-enabled switch from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89 | hpicfOpenFlowMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1 | hpicfOpenFlowObjects | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4 | hpicfOpenFlowInstanceTable | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1 | hpicfOpenFlowInstanceEntry | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31 | hpicfOpenFlowInstanceMissRuleDefaultAction | HP-ICF-OPENFLOW-MIB |