All MIBs › HP-ICF-OPENFLOW-MIB › hpicfOpenFlowEgressOnlyPorts
hpicfOpenFlowEgressOnlyPorts
Module: HP-ICF-OPENFLOW-MIB
OID (symbolic): HP-ICF-OPENFLOW-MIB::hpicfOpenFlowEgressOnlyPorts
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.89.1.21.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this MIB object to 'enable' will advertise egress-only ports to the controller.
What is hpicfOpenFlowEgressOnlyPorts?
Setting this global object to 'enable' (default is disable) makes the switch advertise its egress-only ports to the OpenFlow controller. An admin enables this so the controller's topology view correctly reflects ports that can only be used for outbound forwarding, not as OpenFlow-controlled ingress ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.21.10 snmpwalk -v2c -c public <target> HP-ICF-OPENFLOW-MIB::hpicfOpenFlowEgressOnlyPorts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.21.10.1 snmpget -v2c -c public <target> HP-ICF-OPENFLOW-MIB::hpicfOpenFlowEgressOnlyPorts.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.89.1.21.10.1 i <value>
Start monitoring HP ProCurve/HP Networking OpenFlow-enabled switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-OPENFLOW-MIB::hpicfOpenFlowEgressOnlyPorts OID value, configure state conditions and alerts, and monitor any HP ProCurve/HP Networking OpenFlow-enabled switch from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89 | hpicfOpenFlowMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1 | hpicfOpenFlowObjects | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.21 | hpicfOpenFlowScalarObjects | HP-ICF-OPENFLOW-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.89.1.21.10 | hpicfOpenFlowEgressOnlyPorts | HP-ICF-OPENFLOW-MIB |