All MIBs › HP-ICF-BFD-MIB › hpicfBfdSessConfigDesiredMinTxInterval
hpicfBfdSessConfigDesiredMinTxInterval
Module: HP-ICF-BFD-MIB
OID (symbolic): HP-ICF-BFD-MIB::hpicfBfdSessConfigDesiredMinTxInterval
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2
Node type: OBJECT-TYPE
Type: BfdIntervalTC
Access: read-write
Description: This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved in this case, and should not be used.
What is hpicfBfdSessConfigDesiredMinTxInterval?
This value sets, in microseconds, the minimum interval at which the local system wants to transmit BFD Control packets, per RFC 5880 section 4.1, and the description notes zero is reserved and must not be used. Admins tune it to control how aggressively the switch sends BFD keepalives, balancing fast failure detection against control-plane overhead. Setting this to 100000 (100ms) makes the switch attempt to transmit BFD control packets roughly ten times per second on that session.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2 snmpwalk -v2c -c public <target> HP-ICF-BFD-MIB::hpicfBfdSessConfigDesiredMinTxInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2.1 snmpget -v2c -c public <target> HP-ICF-BFD-MIB::hpicfBfdSessConfigDesiredMinTxInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2.1 s <value>
Start monitoring HP ProCurve/HPE Networking switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-BFD-MIB::hpicfBfdSessConfigDesiredMinTxInterval OID value, configure state conditions and alerts, and monitor any HP ProCurve/HPE Networking switches and routers from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.120 | hpicfBfd | HP-ICF-BFD-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1 | hpicfBfdObjects | HP-ICF-BFD-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1 | hpicfBfdSessConfigTable | HP-ICF-BFD-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1 | hpicfBfdSessConfigEntry | HP-ICF-BFD-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2 | hpicfBfdSessConfigDesiredMinTxInterval | HP-ICF-BFD-MIB |